new setup..ufi alwys eror old setup sama

skywork

log dr ufi

BROM version[1]: 7.1621.1.0
Loading DA: MTK_AllInOne_DA.bin (5.42 Mi😎
version: 3.3001.00.00, start addr: 0x40000800
Connecting to BootROM...
Power off the phone, disconnect and reconnect the battery(if possible) and connect USB cable...
Hold the VOL DOWN to force MediaTek BootROM.
Scanning BootROM or Preloader port... Done.
Detected MediaTek USB Port (COM12)
USB Driver: [MediaTek Inc.] usbser, version: 2.0.1136.0, date: 9-1-2011
Connecting Bootrom... failed
Error: -1073348607 (STATUS_BROM_CMD_STARTCMD_FAIL)
[BROM] Can not pass bootrom start command! Possibly target power up too early.
Please press power button for 10 secs or disconnect and reconnect the battery(if possible) and retry!
Tx data incomplete.

BROM version[1]: 7.1621.1.0
Loading DA: MTK_AllInOne_DA.bin (5.42 Mi😎
version: 3.3001.00.00, start addr: 0x40000800
Connecting to BootROM...
Power off the phone, disconnect and reconnect the battery(if possible) and connect USB cable...
Hold the VOL DOWN to force MediaTek BootROM.
Scanning BootROM or Preloader port... Done.
Detected MediaTek USB Port (COM12)
USB Driver: [MediaTek Inc.] usbser, version: 2.0.1136.0, date: 9-1-2011
Connecting Bootrom... Done.
Sending Download Agent... failed
Platform: MT6797, Hw ver: 0xCA01, Sw ver: 0x0000
Secure config: 0x00
Error: -1073283067 (STATUS_DA_EXCEED_MAX_NUM)

read info and flash with mrt done

Disconnect Mobile...
Re-Put the Mobile Bettery...
Then Connect your Phone to Computer again....
Please Make sure Mobile better has Power...

Searching Mobile Port...
Get Mobile Port is: COM12
Device driver identification:
MediaTek USB Port
Mobile Has Connect...
CPU_NAME: MT6797
Reading Mobile Hardware Info...Success
HW_Inf: 8A00 SW_Inf: CA01
Initialization Mobile ...Success
Downloading Boot1 To Mobile Phone...Success
Mobile phone status:SYNC...
Mobile phone status swtich to :brom...Success
Make sure Mobile status has in :brom...Success
Init Mobile BOOT2 ...
=====================Flash Type(eMMC)==============
Flash Size: 0x0000000E8F800000 -> 59640M
Flash ID: 0x1101003036344733
Flash Name: Toshiba_Unknow
Flash symbol: 064G30
Swich Mobile to Hight Speed Re\Wr Port...
Get Mobile Port is: COM37
Device driver identification:
MediaTek DA USB VCOM (Android)
Reading Mobile Map Data...Success

Geting Mobile info data...
ADD(HEX):0x002E800000 Size(HEX):0x00C0000000

Reading Mobile Version Info...
Corresponding operation completed!!!

madgoeslim

skywork

skywork BROM version[1]: 7.1621.1.0
Loading DA: MTK_AllInOne_DA.bin (5.42 Mi

Just leave BROM to default state. Already test by myself for dozen times, got no problem.

BROM version[1]: 7.1625.3.0 Loading DA: MTK_AllInOne_DA.bin (6.11 MiB) version: 3.3001.00.00, start addr: 0x40000800 Connecting to BootROM... Power off the phone, disconnect and reconnect the battery(if possible) and connect USB cable... Hold the VOL DOWN to force MediaTek BootROM. Scanning BootROM or Preloader port... Done. Detected MediaTek PreLoader USB VCOM (Android) (COM12) Connecting Bootrom... Done. Sending Download Agent... Done. USB speed: High-Speed Platform: MT6797, Hw ver: 0xCA01, Sw ver: 0x0000 Secure ver: 0x00, BL ver: 0x00 Secure config: 0x00 SRAM size: 0 B DRAM size: 3 GiB Card/BGA: BGA (Discrete embedded) Manufacturer ID: 0x11 (Toshiba) Product name: 064G30 (0x303634473330), rev: 0x00, serial number: 0x55D03777 Manufacturing date: Apr 2016 CID: 11010030 36344733 300055D0 377743A5 Capacity: 58.25 GiB(62,549,655,552 bytes) Boot1: 4096 KiB Boot2: 4096 KiB RPMB: 4096 KiB User area: 58.24 GiB(62,537,072,640 bytes) platform: MT6797, cpu abi: arm64-v8a manufacturer: Xiaomi board: , name: nikel brand: Xiaomi, model: Redmi Note 4 build id: MRA58K, version: 6.0 Marshmallow (MRA58K) (MIUI8) build description: nikel-user 6.0 MRA58K V8.0.3.0.MBFMIDG release-keys build version: alps-mp-m0.mp9-V1.64_lcsh6797.6c.lw.m_P101 screen resolution: 1920 x 1080 main camera: imx258_mipi_raw imx258_mipi_raw_qteck lens: lc898214af lc898212xdaf front camera: s5k5e8yx_sub_mipi_raw s5k5e8yx_sub_mipi_raw_qteck audio: amp_6323pmic_spk touch: GT1XX modem: lcsh6797_6c_lw_m_lwctg lcsh6797_6c_lw_m_c2k crypto state: encrypted

zegobit

skywork

Make sure to select "Model" and "Firmware" or scatter file before Identify.
We have clearly notice this on the software, those notice is not just notice but for your own good.

Also, usually you don't have to select BROM version at first stage. Do this if the "auto" selection by software doesn't work.

There are very good website to learn english, make translate.google.com as your friend, so you know what is spoken by the software.

skywork

note4 nikel mtk

HarrisAbdoel

setelah update dongle tidak terdetect, solusinya ??? klo downgrade dongle terdetect normal.

parsi

zegobit hi thank you ,its great update but how about secure boot ?in last update didnt identiy models because of secure boot ! and the most important thing is ufs ! how to know my phone's hard is ufs ?

zegobit

parsi
Thanks, in the latest update for some model(most of them) you will see storage type and info(id) when you select Model, make sure your internet connection is working since we load the information from server. However i think you could also get those information from the device specification on the official page.

Most of the smartphone today had secure boot, some models cant be identified because the lack of loader which can only be obtained from the vendor it self. We'll keep working to fix issues and collection loaders so just give us some time to work.