Connection status: XHCI:HUB3:USB 2.0 High-Speed
Interface: UFI High-Speed
Serial number: 0011-8839-8772
Boot version: 1.04, FW version: 1.11 (Dec 6 2017 17:13:32)
Insertion test... Done.
Init bus...
VCC: 3.3 V, VCCQ: 3.0 V
Bus: 8 bit (HS SDR 48MHz)
Access mode: sector mode
Power supply: dual-voltage (1.70-1.95V, 2.7-3.6V)
Card/BGA: BGA (Discrete embedded) - High density MMC
Manufacturer ID: 0x45 (SanDisk)
Product name: SEM08G (0x53454d303847), rev: 0x90, serial number: 0x0AF82BB0
Manufacturing date: Oca 2013
CID: 45010053 454D3038 47900AF8 2BB0D07C
CSD: D00F0032 0F5903FF FFFFFFFF 92404010
EXT_CSD revision: 1.5 (MMC v4.41)
Partition info:
Boot1: 2048 KiB
Boot2: 2048 KiB
RPMB: 128 KiB
User area: 7.28 GiB(7,818,182,656 bytes)
Partition configuration: 0x00
No boot acknowledge is sent (default)
Device is not boot-enabled (default)
Partitioning support: 0x03
Device support partitioning feature
Device can have enhanced technological features
Device partitioning completed
Boot configuration protection: 0x00
Boot bus conditions: 0x00
Boot area write protection: 0x00
Power-on write protection: possible
Permanent write protection: possible
Lock status: not locked
User area write protection: 0x50
Password protection features: enabled
Power-on write protection: possible
Permanent write protection: not possible
Lock status: not locked

ANDROID ROM info:
platform: msm8960, cpu abi: armeabi-v7a
manufacturer: samsung
board: MSM8960, name: serrano3gxx
brand: samsung, model: GT-I9190
build id: KOT49H, version: 4.4.2 KitKat (KOT49H.I9190XXUCPK1)
build description: serrano3gxx-user 4.4.2 KOT49H I9190XXUCPK1 release-keys

Internal storage: 5.36 GiB
crypto state: unencrypted
Selected: [SanDisk] iNAND SDIN7DP2-8G (BGA153)

???

same problem

I can not upload username file

Alexid7 Current partition access:
Access to user area
Loading file: "\%BACKUPS%\Samsung\GT-I9190-KOT49H.I9190XXUCNH1\userarea.bin", size: 7.28 GiB...
Writing userarea (15269888 sectors)... Failed to write block 0x00000000:65536 (return code: 1, CMD Error: Timeout)
cmd response: 0xC00, card status: 0x0, card state: 6 (Card is receiving operation information)
status: unknown (0)

Kayhan yes same now i change emmc complete ...

Alexid7
the same problem exists in the n7100 and i9200 models
15th emmc
Connection status: XHCI:HUB3:USB 2.0 High-Speed
Interface: UFI High-Speed
Serial number: 0011-8839-8772
Boot version: 1.04, FW version: 1.11 (Dec 6 2017 17:13:32)
Insertion test... Done.
Init bus...
VCC: 3.3 V, VCCQ: 3.0 V
Bus: 8 bit (HS SDR 48MHz)
Access mode: sector mode
Power supply: dual-voltage (1.70-1.95V, 2.7-3.6V)
Card/BGA: BGA (Discrete embedded) - High density MMC
Manufacturer ID: 0x15 (Samsung)
Product name: VTU00M (0x56545530304d), rev: 0xFC, serial number: 0x4336ED27
Manufacturing date: Nis 2014
CID: 15010056 54553030 4DFC4336 ED27414E
CSD: D0270132 0F5903FF F6DBFFFF 8E40406C
EXT_CSD revision: 1.6 (MMC v4.5, v4.51)
Partition info:
Boot1: 2048 KiB
Boot2: 2048 KiB
RPMB: 128 KiB
User area: 14.68 GiB(15,758,000,128 bytes)

Current partition access:
Access to boot partition 1
Loading file: "\%BACKUPS%\Samsung\GT-N7100-JZO54K.N7100XXDME1\boot1.bin", size: 2 MiB...
Writing boot1 (4096 sectors)... Failed to write block 0x00010000:65536 (return code: 51, DMA Error: Fifo error)
cmd response: 0xD00, card status: 0x0, card state: 6 (Card is receiving operation information)
status: unknown (0)
[32]Failed to Switch (return code: 1, CMD Error: Timeout) !!!

theres problem with the socket pin i think. try clean with alcohol ada change the span

vincentzzzz If there is a problem with the socket, I should not see the integration anymore, but I get an error when loading the boot username