UFI BOX DFU Problem

Aidin01

Hi dear grand team ufi supporters my box is stuck on dfu mode (device firmware upgrade) but even i click on both button firmware upgrade and leave dfu but nothing change it seems nothing happend help me masters

enter image description here

Really need it badly

Thank you grand team

Excessive4ce

Mine is stuck on red and blue blinking and not seen at all from pc,.

any idea please?

Thanks

Excessive4ce

I solved by changing USB cable and intalling a previous version and then update to the latest.
Box firmware was old, maybethis is the reason?

Anyway, problem gone. now the only thing is that my box is black version and doesn't work unless on vpn 🙁

Cheers,
Paolo

umair

hello dear you just dnt need to worry about this. if you are one this state then here is the fix..
STATE( led blinking continously when you connect ufi (dfu). the possiblef fixes of this situation is that just open device manager and there you will see your box driver as unknown device with yellow triangle right click on that and manually install ufi high speed drivers . kindly test and post the results . good luck

ChanRattanak

my box show Led blinking too so how to fix it supporter?
my box just send back from supporter and now still can't use it.

Excessive4ce

just check how I solved it.

cheers

WillyMarshall

simple solution...close ufi android tool and open emmc tool..it will automatic detect..tested

kitkit85

WillyMarshall

i thought you are kidding . YES it works !

amitkumar

ufi box detccted in DFU mode(1-boot trigger) please disconnect ufi and reconnect to usb 2.0 HIGH SPEED PORT YOU MAY ALSO Upgrade Box firmware ( just in case) net work Error ; the unknown error was occured: 0 please help me

madgoeslim

amitkumar please disconnect ufi and reconnect to usb 2.0 HIGH SPEED PORT

Hello, did you already tried this suggestion?

onix_emmcfixer

install ufi box a previous version on another other PC and then go back to the PC where dfu mode appears, and it will be solved