Hi, my adapter does not detect emmc FBGA 169/153
Log:
Connection status: EHCI:HUB:USB 2.0 High-Speed
Interface: UFI High-Speed
Serial number:xxxxxxxxxxxx
Boot version: 1.04, FW version: 1.11 (Dec 6 2017 17:13:32)
Insertion test... Done.
Init bus...
VCC: 3.3 V, VCCQ: 3.0 V
Failed to initialize eMMC (return code: 20, CMD Error: Invalid response) !!!
CMD1 error, cmd response: 0x0, card state: 255 (Card is in unknown state)
SEND_OP_COND command failed.
--- Check eMMC pins and connection ---
--- Try to select correct VCC/VCCQ manually ---
--- Try to decrease the clock speed ---
--- Try to use 1 bit connection ---
Check your connection, make sure eMMC inserted properly.
