Connection status: EHCI:HUB:HUB:USB 2.0 High-Speed
Interface: UFI High-Speed
Serial number: 0011-8839-7855
Boot version: 1.04, FW version: 1.10 (Mar 26 2017 14:24:34)
Insertion test... Done.
Init bus...
VCC: 3.3 V, VCCQ: 3.0 V
Bus: 8 bit (HS SDR 52MHz)
Access mode: sector mode
Power supply: dual-voltage (1.70-1.95V, 2.7-3.6V)
Card/BGA: BGA (Discrete embedded) - High density MMC
Manufacturer ID: 0x15 (Samsung)
Product name: QNW00M (0x514e5730304d), rev: 0x00, serial number: 0x28B7DECE
Manufacturing date: Sep 2014
CID: 15010051 4E573030 4D0028B7 DECE918C
CSD: D0270132 0F5903FF F6DBFFEF 8E40400C
EXT_CSD revision: 1.7 (MMC v5.0, v5.01)
Partition info:
Boot1: 4096 KiB
Boot2: 4096 KiB
RPMB: 512 KiB
User area: 7.28 GiB(7,818,182,656 bytes)
Cache size: 64 MiB
Partition configuration: 0x00
No boot acknowledge is sent (default)
Device is not boot-enabled (default)
Partitioning support: 0x07
Device support partitioning feature
Device can have enhanced technological features
Device partitioning possible
Boot configuration protection: 0x00
Boot bus conditions: 0x00
Boot area write protection: 0x00
Power-on write protection: possible
Permanent write protection: possible
Lock status: not locked
User area write protection: 0x10
Password protection features: enabled
Power-on write protection: possible
Permanent write protection: not possible
Lock status: not locked
ANDROID ROM info:
platform: msm8916, cpu abi: armeabi-v7a
manufacturer: samsung
board: MSM8916, name: fortuna3gxx
brand: samsung, model: SM-G530H
build id: KTU84P, version: 5.0.2 Lollipop (KTU84P.G530HDXU2AOE2)
build description: fortuna3gxx-user 4.4.4 KTU84P G530HDXU2AOE2 release-keys
Internal storage: 1.46 GiB
crypto state: unencrypted
Selected: [SAMSUNG] moviNAND KMQNW000SM-B316/8GB+LPDDR3 8Gb (BGA221)
when i try to reparatition i got this error
Connection status: EHCI:HUB:HUB:USB 2.0 High-Speed
Interface: UFI High-Speed
Serial number: 0011-8839-7855
Boot version: 1.04, FW version: 1.10 (Mar 26 2017 14:24:34)
Insertion test... Done.
Init bus...
VCC: 3.3 V, VCCQ: 3.0 V
Bus: 8 bit (HS SDR 52MHz)
Access mode: sector mode
Power supply: dual-voltage (1.70-1.95V, 2.7-3.6V)
Card/BGA: BGA (Discrete embedded) - High density MMC
Manufacturer ID: 0x15 (Samsung)
Product name: QNW00M (0x514e5730304d), rev: 0x00, serial number: 0x28B7DECE
Manufacturing date: Sep 2014
CID: 15010051 4E573030 4D0028B7 DECE918C
CSD: D0270132 0F5903FF F6DBFFEF 8E40400C
EXT_CSD revision: 1.7 (MMC v5.0, v5.01)
Partition info:
Boot1: 4096 KiB
Boot2: 4096 KiB
RPMB: 512 KiB
User area: 7.28 GiB(7,818,182,656 bytes)
Writing eMMC partition settings...
Set general purpose partition... Done
Set write reliability setting... Cannot set write reliability parameters, WR_REL_SET in this device is read-only.
Set OTP Partitioning setting completed... failed !
please h
please me what should i do
