n7505 always restart

AhmedKemo

hi team . i have problem with sam n7505 not2 neo . custmer cume to me ans said this phone always restart and sometimes hang on samsung logo . i take it and flash with last rom and same problem
i connected it with ufi box and identfie emmc . its show me no error normal > i did factory erase and erase whole emmc . but before erase i did full bakup from devise with rom 1 . rom 2 and userarea
i did erase and write extcd then flashed with full rom 5.0 but still dead why
and when i written the 5.0 rom all files writen but system img not written and not show me any error why team
please advise me to make this devise came to life again
thx

AhmedKemo

Connection status: EHCI:HUB:USB 2.0 High-Speed
Interface: UFI High-Speed
Serial number: 0011-8839-6961
Boot version: 1.04, FW version: 1.10 (Mar 26 2017 14:24:34)
Insertion test... Done.
Init bus...
VCC: 3.3 V, VCCQ: 1.8 V
Bus: 1 bit (SDR 4MHz)
Access mode: sector mode
Power supply: dual-voltage (1.70-1.95V, 2.7-3.6V)
Card/BGA: BGA (Discrete embedded) - High density MMC
Manufacturer ID: 0x11 (Toshiba)
Product name: 016GE2 (0x303136474532), rev: 0x04, serial number: 0xE4290441
Manufacturing date: Sep 2014
CID: 11010030 31364745 3204E429 0441914E
CSD: D05E0032 0F5903FF FFFFFFEF 924000D2
EXT_CSD revision: 1.7 (MMC v5.0, v5.01)
Partition info:
Boot1: 4096 KiB
Boot2: 4096 KiB
RPMB: 4096 KiB
User area: 14.68 GiB(15,758,000,128 bytes)
Cache size: 4 MiB
Partition configuration: 0x00
No boot acknowledge is sent (default)
Device is not boot-enabled (default)
Partitioning support: 0x07
Device support partitioning feature
Device can have enhanced technological features
Device partitioning possible
Boot configuration protection: 0x00
Boot bus conditions: 0x01
Bus width: x4 (sdr/ddr), boot mode: sdr(default), reset bus width to x1 sdr(default)
Boot area write protection: 0x10
Power-on write protection: possible
Permanent write protection: not possible
Lock status: not locked
User area write protection: 0x50
Password protection features: enabled
Power-on write protection: possible
Permanent write protection: not possible
Lock status: not locked

ANDROID ROM info:
platform: exynos5, cpu abi: armeabi-v7a
manufacturer: samsung
board: universal5260, name: hlltexx
brand: samsung, model: SM-N7505
build id: KOT49H, version: 4.4.2 KitKat (KOT49H.N7505XXUCNH1)
build description: hlltexx-user 4.4.2 KOT49H N7505XXUCNH1 release-keys

Internal storage: 11.80 GiB
crypto state: unencrypted
Selected: [TOSHIBA] eSD TYD0HH231632RC/16GB (BGA221)

madgoeslim

AhmedKemo Partition configuration: 0x00
No boot acknowledge is sent (default)
Device is not boot-enabled (default)

Well, this is exynos device right?
So, you have wrong partition boot configuration setting, thats cause your device still dead.
Repair your Boot partition config to correct one.
You can use Ext_CSD Preset button by following pictures below.

AhmedKemo

still dead

AhmedKemo

help team ??!!!

AhmedKemo

i need help friends

Fastex

Hello Ahmed, I had TWO "NOTE 2" phones last month with the same issue, fixed it by changing a new battery each time 🙂 tried flashing multiple roms but nothing worked aside from changing the battery 😉
I know it's a Note 3 Neo but you should probably check this solution
Cheers.

AhmedKemo

i already changed bro 2 battery usb connector flat same problem i think its have other problem

Razesh

sir not showing exynos option in my ufi what i can do help sir plz

haxiang

Same question.
I couldn't find it either.