Hello mr.zegobit ... does emmc kmvtu000lm-b503 support for samsung i9190? Please help me
someone used it for i9192 and put video on youtube so it must also work on i9190
finally tested i9192 with ufi changed emmc from s3 but phone worked only after emmc cid matched as of sandisk
The phone does not required product name or those config that u mean in CID and for the fact for now its only Mediatek chipset who needed to match and regularly its not the whole cellphone with mediatek will need it, some are free to renamed.
Dujeh_Djajadinata even i was surprised on cid matter. old emmc had some writing issues so i backed up ext csd and 512mb userdata new emmc i used same backup and ext csd file from old emmc but no luck just for hit and trial thing i tried cid patching and it worked on first attempt
The problem with the incorrect configuration of 177 and 179 of the register "ext_csd" Look at how the work with these registers was implemented in the programmer "z3x easyjtag plus".
one more i9192 done but this time different method old emmc drilled and cleaned new VTUOOM emmc placed on pcb without any programming use sd card for boot repair go to factory image tab and select firmware for i9192 tick sd boot recovery and interface selected as ufi sd adapter which comes with ufi box after write image to sd card put it in phone and try power on phone in download mode phone will boot in download mode than flash full firmware after flashing you need to write efs by any known method or any xyz box