problem connect emmc

MROKTA

pls help me .
problem :
https://ibb.co/dh6e2v

Connection status: EHCI:HUB:HUB:USB 2.00 High-speed
Interface: UFI High-Speed
Serial number: 0011-8839-3946
Boot version: 1.04, FW version: 1.10 (Mar 26 2017 14:24:34)
Insertion test... Done.
Init bus...
VCC: 3.3 V, VCCQ: 3.0 V
Failed to initialize eMMC (return code: 17, CMD Error: Timeout) !!!
CMD1 error, cmd response: 0x0, card state: 255 (Card is in unknown state)
SEND_OP_COND command failed.
--- Check eMMC pins and connection ---
--- Try to select correct VCC/VCCQ manually ---
--- Try to decrease the clock speed ---
--- Try to use 1 bit connection ---
Check your connection, make sure eMMC inserted properly.

Phihunggsm

Reconnect please

MROKTA

Can not connect, even with an adapter I tested it again

[][1]

Error with different ic model

hermawanherry

MROKTA try to plug power dc 5v to UFI Box, and then try to identify eMMC again.

MROKTA

I tried it, but there is still this problem

Deepakgarg

how many boxes you have? different serial number in all screen shots
either copying screenshots from other threads

MROKTA

Because the text was the same, I used the photo in the forum

WawanPurwanda

please help how to solved

WawanPurwanda

Connection status: AMDHUB30:AMDHUB30:USB 2.00 High-speed
Interface: UFI High-Speed
Serial number: 0011-8839-5853
Boot version: 1.04, FW version: 1.10 (Mar 26 2017 14:24:34)
Insertion test... Done.
Init bus...
VCC: 3.3 V, VCCQ: 1.8 V
Failed to initialize eMMC (return code: 17, CMD Error: Timeout) !!!
CMD1 error, cmd response: 0x0, card state: 255 (Card is in unknown state)
SEND_OP_COND command failed.
--- Check eMMC pins and connection ---
--- Try to select correct VCC/VCCQ manually ---
--- Try to decrease the clock speed ---
Check your connection, make sure eMMC inserted properly.

Deepakgarg

WawanPurwanda connections are not good recheck wires soldered

ccipo

Used power supply 3.8 and connect the ground and BSI together .

vasimsiyana

Use 1.2.399 version

WawanPurwanda

vasimsiyana
thanks brother .....
tested
Init bus...
VCC: 3.3 V, VCCQ: 1.8 V
Bus: 1 bit (SDR 4MHz)
Access mode: sector mode
Power supply: dual-voltage (1.70-1.95V, 2.7-3.6V)
Card/BGA: BGA (Discrete embedded) - High density MMC
Manufacturer ID: 0x15 (Samsung)
Product name: VTU00M (0x56545530304d), rev: 0xFC, serial number: 0x3D398686
Manufacturing date: Apr 2014
CID: 15010056 54553030 4DFC3D39 868641FA
CSD: D0270132 0F5903FF F6DBFFFF 8E40406C
EXT_CSD revision: 1.6 (MMC v4.5, v4.51)
Partition info:
Boot1: 2048 KiB
Boot2: 2048 KiB
RPMB: 128 KiB
User area: 14.68 GiB(15,758,000,128 bytes)
Cache size: 64 MiB
Partition configuration: 0x00
No boot acknowledge is sent (default)
Device is not boot-enabled (default)
Partitioning support: 0x07
Device support partitioning feature
Device can have enhanced technological features
Device partitioning possible
Boot configuration protection: 0x00
Boot bus conditions: 0x00
Boot area write protection: 0x00
Power-on write protection: possible
Permanent write protection: possible
Lock status: not locked
EXT_CSD backup saved to "\%BACKUPS%\VTU00M_3D398686.ext_csd"
Selected: [SAMSUNG] moviNAND KMVTU000LM-B503/16GB (FBGA153)

BhupenderBanga

he used 1.2.0.399 in screenshot see mr vasim siyana i hv also the same problem in 1.2.0.411 version

Yasir-gsm

VCCQ not properly connected
Init bus...
VCC: 3.3 V, VCCQ: 1.8 V
Bus: 1 bit (SDR 3MHz)
Access mode: sector mode
Power supply: dual-voltage (1.70-1.95V, 2.7-3.6V)
Card/BGA: BGA (Discrete embedded) - High density MMC
Manufacturer ID: 0x15 (Samsung)
Product name: VTU00M (0x56545530304d), rev: 0xFC, serial number: 0x79AF1FC8
Manufacturing date: Apr 2013
CID: 15010056 54553030 4DFC79AF 1FC84038
CSD: D0270132 0F5903FF F6DBFFFF 8E40406C
EXT_CSD revision: 1.6 (MMC v4.5, v4.51)
Partition info:
Boot1: 2048 KiB
Boot2: 2048 KiB
RPMB: 128 KiB
User area: 14.68 GiB(15,758,000,128 bytes)

Factory erase... failed !
Reseting PART_CONFIG... Done.
Reseting BOOT_BUS_CONDITIONS... Done.
Failed to initialize eMMC (return code: 20, CMD Error: Invalid response) !!!
CMD1 error, cmd response: 0x40000, card state: 255 (Card is in unknown state)
SEND_OP_COND command failed.

madgoeslim

Yasir-gsm Damage internal storage. Try to recover via TP methode. If still fails, than replace.

EZEL992

Connection status: EHCI:HUB:USB 2.00 High-Speed
Interface: UFI High-Speed
Serial number: 0011-8840-1750
Boot version: 1.04, FW version: 1.10 (Mar 26 2017 14:24:34)
Insertion test... Done.
VCC, VCCQ not properly connected
Init bus...
VCC: 3.3 V, VCCQ: 1.8 V
Failed to initialize eMMC (return code: 17, CMD Error: Timeout) !!!
CMD1 error, cmd response: 0x0, card state: 255 (Card is in unknown state)
SEND_OP_COND command failed.
--- Check eMMC pins and connection ---
--- Try to select correct VCC/VCCQ manually ---
--- Try to decrease the clock speed ---
failed
updating file: app/mediatek.def (12.05 Mi😎...???

mtaufika98

Failed to initialize eMMC (return code: 17, CMD Error: Timeout) !!!
CMD1 error, cmd response: 0x0, card state: 255 (Card is in unknown state)
SEND_OP_COND command failed.
--- Check eMMC pins and connection ---
--- Try to select correct VCC/VCCQ manually ---
--- Try to decrease the clock speed ---

please help me

ayazuddin

Oppo a5 chp1809 with isp adapter
Connection status: EHCI:HUB:HUB:USB 2.0 High-Speed
Interface: UFI High-Speed
Serial number: 0011-8840-4273
Boot version: 1.04, FW version: 1.12 (Jun 7 2018 00:06:47)
Insertion test... Done.
Init bus...
VCC: 3.3 V, VCCQ: 3.0 V
Failed to initialize eMMC (return code: 226, Over current detected) !!!
Check your connection, make sure eMMC inserted properly.
pls Help

Jane

I receive that error when I put eMMC in a wrong orientation