Connection status: EHCI:HUB:USB 2.0 High-Speed
Interface: UFI High-Speed
Serial number: 0011-8840-1585
Boot version: 1.04, FW version: 1.10 (Mar 26 2017 14:24:34)
Insertion test... Done.
Init bus...
VCC: 3.3 V, VCCQ: 2.8 V
Bus: 1 bit (SDR 24MHz)
Access mode: sector mode
Power supply: dual-voltage (1.70-1.95V, 2.7-3.6V)
Card/BGA: BGA (Discrete embedded) - High density MMC
Manufacturer ID: 0x15 (Samsung)
Product name: FN12MB (0x464e31324d42), rev: 0x00, serial number: 0xBC4D570E
Manufacturing date: Nov 2015
CID: 15010046 4E31324D 4200BC4D 570EB29E
CSD: D0270132 0F5903FF F6DBFFEF 8E40400C
EXT_CSD revision: 1.7 (MMC v5.0, v5.01)
Partition info:
Boot1: 4096 KiB
Boot2: 4096 KiB
RPMB: 512 KiB
User area: 7.28 GiB(7,818,182,656 bytes)
Current partition access:
Access to boot partition 1
Loading file: "\%BACKUPS%\Samsung\SM-J200G_LMY47X_J200GDDU1APB1\boot1.bin", size: 4 MiB...
Writing boot1 (8192 sectors)... Failed to write block 0x00000000:65536 (return code: 36, Transmission Error: Data CRC fail)
cmd response: 0xD00, card status: 0x0, card state: 6 (Card is receiving operation information)
status: unknown (0)
[32]Failed to Switch (return code: 1, CMD Error: Timeout) !!!
