Connection status: EHCI:HUB:HUB:USB 2.0 High-Speed
Interface: UFI High-Speed
Serial number: 0011-8839-7069
Boot version: 1.04, FW version: 1.12 (Jun 7 2018 00:06:47)
Insertion test... Done.
Init bus...
VCC: 3.3 V, VCCQ: 1.8 V
Bus: 1 bit (SDR 4MHz)
Access mode: sector mode
Power supply: dual-voltage (1.70-1.95V, 2.7-3.6V)
Card/BGA: BGA (Discrete embedded) - High density MMC
Manufacturer ID: 0x90 (SK Hynix)
Product name: H4G1d (0x483447316404), rev: 0x86, serial number: 0x04A4C44F
Manufacturing date: Jan 2015
CID: 90014A48 34473164 048604A4 C44F12AA
CSD: D0270132 0F5903FF FFFFFFE7 8A4040E2
EXT_CSD revision: 1.5 (MMC v4.41)
Partition info:
Boot1: 2048 KiB
Boot2: 2048 KiB
RPMB: 2048 KiB
User area: 3.61 GiB(3,875,536,896 bytes)
Writing preloader header... Done.
Current partition access:
Access to boot partition 1
Writing PRELOADER at 0x00000000 (200 sectors)... Done in 0.217 s
Writing boot partition config to 0x48... Done.
Failed to initialize eMMC (return code: 6, CMD Error: Invalid Voltage Range) !!!
CMD1 error, cmd response: 0xFF8080, card state: 255 (Card is in unknown state)
SEND_OP_COND command failed.
Current partition access:
Access to user area
Processing file: "MBR"...
Writing MBR at 0x00000000 (1 sectors)... Failed to write block 0x00000000:0 (return code: 0, CMD Error: )
cmd response: 0x0, card status: 0x0, card state: 0 (Card is in unknown state)
OS error code: 0x00000102(The wait operation timed out)
i need solution for this error pls help someone
