Master Madgoeslim::: Need Your Attention!!! How to CID Patch Qualcomm devices?

droidxpert

How correctly Patch CID, Qualcomm EMMCs by using the rawprogram0.xml or patch0.xml?
Incase of Mediatek we know CID by Scatter Preloader file that which CIDs are supported for EMMC upgradations ....
In the same way, how to know exactly Supported CIDs for Qualcomm Devices EMMCs Upgradations....!!!
Please guide us further Master Madgoeslim...

madgoeslim

droidxpert Hello,
As we all know, for the replacement of the EMCP mediatek platform, the correct cid is needed, because the preloader checks the CID from EMCP.
But for qualcomm platforms, there is no cid check request from the phone, so the emcp cid is not very important in replacing emcp in qualcomm in general.

MAJNU_SEARCH_JULIET

madgoeslim Okay, than What about boot.img files and emmcappsboot.mbn files????
In Qualcomm devices????
Above files doesnot have cid or they does not have cid,Plz clear the doubts???...Thanks.

Razzak

sir i need coolpad 8297l100 emmc dump file plz help

droidxpert

Razzak you can download from support..... Emmc toolbox

kaushik15292

Razzak
bro you don't need dump for Coolpad mobiles
you just need Download Firmware
you need Extract Firmware Via YGDP Tool
otherwise Download From google {Coolpad Dazen1 Qfil Firmware}
https://docs.google.com/uc?id=0B4xgbPbW_bgTdHNpQ1pHZElqams&export=download
then you need to write Rawprogram and Patch file from UFI Factory Image

MAJNU_SEARCH_JULIET

Razzak No need dump file ,You can simply ressurect the Phone by flashing rawprogram.xml and patch .xml file inbUFI emmc toolbox ,factory image tab.

Razzak

suport download no file

Razzak

plz help sir
i need dump file......

madgoeslim

MAJNU_SEARCH_JULIET Hello,
Boot.img contains linux kernel and ramdisk.
Emmcappsboot.mbn is android bootloader which responsible to load kernel (boot.img) for booting to the next boot sequence (Android = system, or fastboot mode, or to download mode with special button).
While preloader in mediatek, much like sbl in qualcomm, with extended function (depend on every platform to implement their bootloader environtment), in Mediatek, preloader have extended function checking the CID of the emcp for mapping external RAM purpose, while in qualcomm there are no such(checking CID) function.

MAJNU_SEARCH_JULIET

madgoeslim Okay,Thanks for this Valueable amswer.....

arifzaman

madgoeslim i am new user plz helpe me
Failed to initialize eMMC (return code: 17, CMD Error: Timeout) !!!
CMD1 error, cmd response: 0x0, card state: 255 (Card is in unknown state)
SEND_OP_COND command failed.
--- Check eMMC pins and connection ---
--- Try to select correct VCC/VCCQ manually ---
--- Try to decrease the clock speed ---
--- Try to use 1 bit connection ---

i am new user plz helpe me
Failed to initialize eMMC (return code: 17, CMD Error: Timeout) !!!
CMD1 error, cmd response: 0x0, card state: 255 (Card is in unknown state)
SEND_OP_COND command failed.
--- Check eMMC pins and connection ---
--- Try to select correct VCC/VCCQ manually ---
--- Try to decrease the clock speed ---
--- Try to use 1 bit connection ---

BellamyParker

arifzaman
l'm sorry i am new user also , but i ever facing this case ...

if you use ISP or direct wire try to check pin out and conection , conection vcc vccq clk cmd dat0 must be right and good....try to identify again

but sometimes other type of hp such as samsung core 2 g355h need addtional power and helped it use power supply 1,5v....

easy metodhe is replace emmc/emcp no need wire just fill data and place it...

arifzaman

no i am try to only emmc with the ufi socket

arifzaman

**flas don but 9008 port not recover
Firmware package: H90120e_00_0316
Scanning for Qualcomm HS-USB QDLoader 9008 device...
Download Port: Qualcomm HS-USB QDLoader 9008 (COM3)
Connection status: EHCI:HUB:HUB:HUB:USB 2.0 High-Speed
USB Driver: [Qualcomm Incorporated] qcusbser, version: 2.1.2.0, date: 7-8-2015
Initializing...
MSM Serial number: 0x025ee5f3
MSM HW ID: 0x009690e1 (MSM8992)
OEM Public Key Hash: 0xb5baca995aec012db32eb9e49ca340f7d4c26153aaa60c5a82a03f99afc698e3
SBL SW version: 0
Firehose: prog_emmc_firehose_8992_lite.mbn
sha1: 8457f9346c488f93789d1318dd2129e3b0931ee2, size: 267.16 KiB
QC_IMAGE_VERSION: BOOT.BF.2.3-00300
IMAGE_VARIANT: ESADANAZA
OEM_IMAGE_VERSION: topaz
Sending firehose loader... Done.
Handshaking...
Sending ping... Done.
Binary build date: Mar 3 2015 19:29:19
Chip serial num: 39773683 (0x25ee5f3)
Sending configurations...
TargetName: 8992
MemoryName: eMMC
DateTime: Mar 3 2015 - 19:29:19
Version: 1
Firehose configured.
Storage type: eMMC
Capacity: 58.25 GiB(62,549,655,552 bytes)
Boot1: 4096 KiB
Boot2: 4096 KiB
RPMB: 4096 KiB
User area: 58.24 GiB(62,537,072,640 bytes)

Processing rawprogram0.xml
Writing PrimaryGPT at 0x00000000 (1024 sectors)... Done.
Writing modem at 0x00800000 (153600 sectors)... Done.
Writing pmic at 0x06000000 (1024 sectors)... Done.
Writing sbl1 at 0x06080000 (2048 sectors)... Done.
Writing tz at 0x06180000 (2048 sectors)... Done.
Writing sdi at 0x06280000 (1024 sectors)... Done.
Writing hyp at 0x06300000 (1024 sectors)... Done.
Writing rpm at 0x06380000 (1024 sectors)... Done.
Writing aboot at 0x06400000 (2048 sectors)... Done.
Writing sbl1bak at 0x06600000 (2048 sectors)... Done.
Writing pmicbak at 0x06700000 (1024 sectors)... Done.
Writing hypbak at 0x06780000 (1024 sectors)... Done.
Writing tzbak at 0x06800000 (2048 sectors)... Done.
Writing rpmbak at 0x06900000 (1024 sectors)... Done.
Writing abootbak at 0x06980000 (2048 sectors)... Done.
Writing sdibak at 0x06B80000 (1024 sectors)... Done.
Writing persist at 0x08800000 (10240 sectors)... Done.
Writing sec at 0x0B000000 (1024 sectors)... Done.
Writing rct at 0x0B180000 (1024 sectors)... Done.
Writing laf at 0x0B800000 (74752 sectors)... Done.
Writing boot at 0x0E800000 (69632 sectors)... Done.
Writing recovery at 0x11000000 (71680 sectors)... Done.
Writing raw_resources at 0x16800000 (8192 sectors)... Done.
Writing raw_resourcesbak at 0x16C00000 (8192 sectors)... Done.
Writing factory at 0x17000000 (1024 sectors)... Done.
Writing system at 0x1B800000 (263168 sectors)... Done.
Writing system at 0x23911000 (260096 sectors)... Done.
Writing system at 0x2B9FA000 (259072 sectors)... Done.
Writing system at 0x33911000 (1024 sectors)... Done.
Writing system at 0x33B0B000 (256000 sectors)... Done.
Writing system at 0x3B9FA000 (259072 sectors)... Done.
Writing system at 0x43911000 (1024 sectors)... Done.
Writing system at 0x43B0B000 (256000 sectors)... Done.
Writing system at 0x4B9FA000 (259072 sectors)... Done.
Writing system at 0x53911000 (1024 sectors)... Done.
Writing system at 0x53B0B000 (256000 sectors)... Done.
Writing system at 0x5B9FA000 (259072 sectors)... Done.
Writing system at 0x63911000 (1024 sectors)... Done.
Writing system at 0x63B0B000 (256000 sectors)... Done.
Writing system at 0x6B9FA000 (259072 sectors)... Done.
Writing system at 0x739FA000 (259072 sectors)... Done.
Writing system at 0x7B9FA000 (259072 sectors)... Done.
Writing system at 0x839FA000 (259072 sectors)... Done.
Writing system at 0x8B9FA000 (259072 sectors)... Done.
Writing system at 0x939FA000 (259072 sectors)... Done.
Writing system at 0x9B9FA000 (259072 sectors)... Done.
Writing system at 0xA39FA000 (259072 sectors)... Done.
Writing system at 0xAB9FA000 (259072 sectors)... Done.
Writing system at 0xB39FA000 (259072 sectors)... Done.
Writing system at 0xBB9FA000 (259072 sectors)... Done.
Writing system at 0xC39FA000 (259072 sectors)... Done.
Writing system at 0xCB9FA000 (259072 sectors)... Done.
Writing system at 0xD39FA000 (259072 sectors)... Done.
Writing system at 0xDB9FA000 (259072 sectors)... Done.
Writing system at 0xE3911000 (1024 sectors)... Done.
Writing system at 0xE3B0B000 (256000 sectors)... Done.
Writing system at 0xEB9FA000 (259072 sectors)... Done.
Writing system at 0xF3911000 (1024 sectors)... Done.
Writing system at 0xF3B0B000 (256000 sectors)... Done.
Writing system at 0xFB9FA000 (89129 sectors)... Done.
Reset power ... Done.

Flashing completed in 21 mins 49.136 s
**

madgoeslim

arifzaman **flas don but 9008 port not recover

Hello, can you be more specific about the model and brand of your device please.

arifzaman

MONILE LG H901

madgoeslim

arifzaman Did you tried another firmware? Te latest one if possible. Some LG implement ARB t their newest device.
If you face same error, even after try many firmware, please do Storage Test, but backup unique partition (mark with semi red line), make sure there are no error in the log.
If error still occure, you should check at chip level, emmc the most.

bangeko

Check your board model