Hello to the whole community! This eMMC comes from a sm-A510F. ISP technique. This has never happened to me. I double checked the same problem. Ufi box can not connect the CLK point. Thank you
RaffaeleQuarta As if the CLK point not properly jumpered while soldering and May the CLK be wrong and Track for the appropriate CLK Point... As if all fails then it's time for EMMC Chip Off and Program It....
droidxpert Thank your so mutch for answers. Name eMMC: THGBMFG7C2LBAIL Can you give me clk point ?
RaffaeleQuarta FYI... CLK Point depends upon the how PCB is manufactured by vendor can be found by schematic of the device... By using the EMCP we can not find CLK point. Better if EMCP is glue free dismount it and Program It..
droidxpert This chip is already disassembled and removed. I want to recover data inside. and ufi box can not connect to the ClK point
RaffaeleQuarta First Of all Rebal the EMCP properly.... Check any pin is damaged while removing the EMCP.... If the Pin Damaged is CLK then you must replace the EMCP... As if any pin is found to be damaged wheather it is CLK or not check ... EMCP identity and which shows the all balls which pin represents what... Thus you can confirm that the Pin Damaged is CLK or not! Hope this information may help you....
droidxpert Thank you so Mutch. I have CLK pin been connected !!! But now, UFI-box show there
Failed to initialize eMMC (return code: 17, CMD Error: Timeout)!!!
RaffaeleQuarta FYI.... This mostly happens improper reballing of the EMCP... Reball Properly and Try to Identify .... If fails again then EMCP might be damaged....
