I WONDER WHATS REALLY GOING ON PHONE BRIKX WHILE FLASHING IT BUT WHEN WRITING EMMC DUMP BY UFI DEVICE NEVER GETS BK TO LIFE I WONDER WHERE IAM GOING WRNG HERE ARE SOME LOGS OF A J200H
Connection status: IUSB3HUB:USB 2.0 High-Speed
Interface: UFI High-Speed
Serial number: 0011-8840-4224
Boot version: 1.04, FW version: 1.12 (Jun 7 2018 00:06:47)
Insertion test... Done.
Init bus...
VCC: 3.3 V, VCCQ: 1.8 V
Bus: 1 bit (SDR 4MHz)
Access mode: sector mode
Power supply: dual-voltage (1.70-1.95V, 2.7-3.6V)
Card/BGA: BGA (Discrete embedded) - High density MMC
Manufacturer ID: 0x90 (SK Hynix)
Product name: H8G4t (0x483847347421), rev: 0x01, serial number: 0xBB25289E
Manufacturing date: Sep 2015
CID: 90014A48 38473474 2101BB25 289E9208
CSD: D07F0132 0F5903FF FFFFFFEF 8A400012
EXT_CSD revision: 1.7 (MMC v5.0, v5.01)
Partition info:
Boot1: 4096 KiB
Boot2: 4096 KiB
RPMB: 4096 KiB
User area: 7.28 GiB(7,818,182,656 bytes)
Cache size: 1 MiB
Partition configuration: 0x00
No boot acknowledge is sent (default)
Device is not boot-enabled (default)
Partitioning support: 0x07
Device support partitioning feature
Device can have enhanced technological features
Device partitioning completed
Boot configuration protection: 0x00
Boot bus conditions: 0x00
Boot area write protection: 0x00
Power-on write protection: possible
Permanent write protection: possible
Lock status: not locked
EXT_CSD backup saved to "\%BACKUPS%\H8G4t_BB25289E.ext_csd"
crypto state: encrypted?
EXT CSD info:
EXT_CSD revision: 1.7 (MMC v5.0, v5.01)
Partition info:
Boot1: 4096 KiB
Boot2: 4096 KiB
RPMB: 4096 KiB
User area: 7.28 GiB(7,818,182,656 bytes)
Cache size: 1 MiB
Partition configuration: 0x08
No boot acknowledge is sent (default)
Boot partition 1 is enabled for boot
Partitioning support: 0x07
Device support partitioning feature
Device can have enhanced technological features
Device partitioning possible
Boot configuration protection: 0x00
Boot bus conditions: 0x00
Boot area write protection: 0x00
1ST STEP
Connection status: IUSB3HUB:USB 2.0 High-Speed
Interface: UFI High-Speed
Serial number: 0011-8840-4224
Boot version: 1.04, FW version: 1.12 (Jun 7 2018 00:06:47)
Insertion test... Done.
Init bus...
VCC: 3.3 V, VCCQ: 1.8 V
Bus: 1 bit (SDR 4MHz)
Access mode: sector mode
Power supply: dual-voltage (1.70-1.95V, 2.7-3.6V)
Card/BGA: BGA (Discrete embedded) - High density MMC
Manufacturer ID: 0x90 (SK Hynix)
Product name: H8G4t (0x483847347421), rev: 0x01, serial number: 0xBB25289E
Manufacturing date: Sep 2015
CID: 90014A48 38473474 2101BB25 289E9208
CSD: D07F0132 0F5903FF FFFFFFEF 8A400012
EXT_CSD revision: 1.7 (MMC v5.0, v5.01)
Partition info:
Boot1: 4096 KiB
Boot2: 4096 KiB
RPMB: 4096 KiB
User area: 7.28 GiB(7,818,182,656 bytes)
eMMC 5.x HEALTH report:
Device lifetime: Normal
Estimation of the device lifetime (SLC): 0% - 10% device life time used
Estimation of the device lifetime (MLC): 0% - 10% device life time used
2 STEP
NAND STEP
Connection status: IUSB3HUB:USB 2.0 High-Speed
Interface: UFI High-Speed
Serial number: 0011-8840-4224
Boot version: 1.04, FW version: 1.12 (Jun 7 2018 00:06:47)
Insertion test... Done.
Init bus...
VCC: 3.3 V, VCCQ: 1.8 V
Bus: 1 bit (SDR 4MHz)
Access mode: sector mode
Power supply: dual-voltage (1.70-1.95V, 2.7-3.6V)
Card/BGA: BGA (Discrete embedded) - High density MMC
Manufacturer ID: 0x90 (SK Hynix)
Product name: H8G4t (0x483847347421), rev: 0x01, serial number: 0xBB25289E
Manufacturing date: Sep 2015
CID: 90014A48 38473474 2101BB25 289E9208
CSD: D07F0132 0F5903FF FFFFFFEF 8A400012
EXT_CSD revision: 1.7 (MMC v5.0, v5.01)
Partition info:
Boot1: 4096 KiB
Boot2: 4096 KiB
RPMB: 4096 KiB
User area: 7.28 GiB(7,818,182,656 bytes)
Current partition access:
Access to boot partition 1
Writing random bytes to boot1, sector: 0... Done in 0.141 s
Verifying... Done in 0.003 s, content verified successfully.
Writing random bytes to boot1, sector: 6096... Done in 0.004 s
Verifying... Done in 0.002 s, content verified successfully.
Current partition access:
Access to user area
Writing random bytes to userarea, sector: 0... Done in 0.056 s
Verifying... Done in 0.003 s, content verified successfully.
Writing random bytes to userarea, sector: 9304281... Done in 0.003 s
Verifying... Done in 0.003 s, content verified successfully.
ERASE STEP
Connection status: IUSB3HUB:USB 2.0 High-Speed
Interface: UFI High-Speed
Serial number: 0011-8840-4224
Boot version: 1.04, FW version: 1.12 (Jun 7 2018 00:06:47)
Insertion test... Done.
Init bus...
VCC: 3.3 V, VCCQ: 1.8 V
Bus: 1 bit (SDR 4MHz)
Access mode: sector mode
Power supply: dual-voltage (1.70-1.95V, 2.7-3.6V)
Card/BGA: BGA (Discrete embedded) - High density MMC
Manufacturer ID: 0x90 (SK Hynix)
Product name: H8G4t (0x483847347421), rev: 0x01, serial number: 0xBB25289E
Manufacturing date: Sep 2015
CID: 90014A48 38473474 2101BB25 289E9208
CSD: D07F0132 0F5903FF FFFFFFEF 8A400012
EXT_CSD revision: 1.7 (MMC v5.0, v5.01)
Partition info:
Boot1: 4096 KiB
Boot2: 4096 KiB
RPMB: 4096 KiB
User area: 7.28 GiB(7,818,182,656 bytes)
Current partition access:
Access to boot partition 1
Erasing boot1 data... Done in 0.477 s
Current partition access:
Access to boot partition 2
Erasing boot2 data... Done in 0.466 s
Current partition access:
Access to user area
Erasing userarea data... Done in 0.574 s
LASTSTEP WRITE EMMC FILE
Connection status: IUSB3HUB:USB 2.0 High-Speed
Interface: UFI High-Speed
Serial number: 0011-8840-4224
Boot version: 1.04, FW version: 1.12 (Jun 7 2018 00:06:47)
Insertion test... Done.
Init bus...
VCC: 3.3 V, VCCQ: 1.8 V
Bus: 1 bit (SDR 4MHz)
Access mode: sector mode
Power supply: dual-voltage (1.70-1.95V, 2.7-3.6V)
Card/BGA: BGA (Discrete embedded) - High density MMC
Manufacturer ID: 0x90 (SK Hynix)
Product name: H8G4t (0x483847347421), rev: 0x01, serial number: 0xBB25289E
Manufacturing date: Sep 2015
CID: 90014A48 38473474 2101BB25 289E9208
CSD: D07F0132 0F5903FF FFFFFFEF 8A400012
EXT_CSD revision: 1.7 (MMC v5.0, v5.01)
Partition info:
Boot1: 4096 KiB
Boot2: 4096 KiB
RPMB: 4096 KiB
User area: 7.28 GiB(7,818,182,656 bytes)
Current partition access:
Access to boot partition 1
Loading file: "\C:\Users\FERZ\Desktop\J200H\EMMC_ROM2_H8G4t_1701297375_00000000_00400000.bin", size: 4 MiB...
Writing boot1 (8192 sectors)... Done in 9.041 s
Current partition access:
Access to boot partition 2
Loading file: "\C:\Users\FERZ\Desktop\J200H\EMMC_ROM3_H8G4t_1701297375_00000000_00400000.bin", size: 4 MiB...
Writing boot2 (8192 sectors)... Done in 9.044 s
Current partition access:
Access to user area
Loading file: "\C:\Users\FERZ\Desktop\J200H\EMMC_ROM1_H8G4t_1701297375_00000000_73200000.bin", size: 1.80 GiB...
Writing userarea (3772416 sectors)... Done in 1 hour 6 mins 33.460 s
Loading file: "\C:\Users\FERZ\Desktop\J200H\H8G4t%20_1701297375_20170331_2054.extcsd", size: 512 bytes...
Writing extcsd, 512 bytes... Done.
New EXT CSD info:
EXT_CSD revision: 1.7 (MMC v5.0, v5.01)
Partition info:
Boot1: 4096 KiB
Boot2: 4096 KiB
RPMB: 4096 KiB
User area: 7.28 GiB(7,818,182,656 bytes)
Cache size: 1 MiB
Partition configuration: 0x08
Partitioning support: 0x07
Boot configuration protection: 0x00
Boot bus conditions: 0x00
Boot area write protection: 0x00
after reead info
Connection status: IUSB3HUB:USB 2.0 High-Speed
Interface: UFI High-Speed
Serial number: 0011-8840-4224
Boot version: 1.04, FW version: 1.12 (Jun 7 2018 00:06:47)
Insertion test... Done.
Init bus...
VCC: 3.3 V, VCCQ: 1.8 V
Bus: 1 bit (SDR 4MHz)
Access mode: sector mode
Power supply: dual-voltage (1.70-1.95V, 2.7-3.6V)
Card/BGA: BGA (Discrete embedded) - High density MMC
Manufacturer ID: 0x90 (SK Hynix)
Product name: H8G4t (0x483847347421), rev: 0x01, serial number: 0xBB25289E
Manufacturing date: Sep 2015
CID: 90014A48 38473474 2101BB25 289E9208
CSD: D07F0132 0F5903FF FFFFFFEF 8A400012
EXT_CSD revision: 1.7 (MMC v5.0, v5.01)
Partition info:
Boot1: 4096 KiB
Boot2: 4096 KiB
RPMB: 4096 KiB
User area: 7.28 GiB(7,818,182,656 bytes)
Cache size: 1 MiB
Partition configuration: 0x08
No boot acknowledge is sent (default)
Boot partition 1 is enabled for boot
Partitioning support: 0x07
Device support partitioning feature
Device can have enhanced technological features
Device partitioning completed
Boot configuration protection: 0x00
Boot bus conditions: 0x00
Boot area write protection: 0x00
Power-on write protection: possible
Permanent write protection: possible
Lock status: not locked
ANDROID System Info:
platform: sc8830, cpu abi: armeabi-v7a
manufacturer: samsung
board: SC7730SE, name: j23gdd
brand: samsung, model: SM-J200H
build id: LMY48B, version: 5.1.1 Lollipop (LMY48B.J200HXXU0APK1)
build description: j23gdd-user 5.1.1 LMY48B J200HXXU0APK1 release-keys
crypto state: encrypted?
butr device not show up
