Lg H810 dead mobile after emmc(ISP) flash it shows hs-usb qdloader 9008(com30) when usb connect.
Is it any solution for this?
Check log below
Connection status: XHCI:HUB3:USB 2.0 High-Speed
Interface: UFI High-Speed
Serial number: 0011-8839-8264
Boot version: 1.04, FW version: 1.12 (Jun 7 2018 00:06:47)
Insertion test... Done.
Init bus...
VCC: 3.3 V, VCCQ: 1.8 V
Bus: 1 bit (SDR 4MHz)
Access mode: sector mode
Power supply: dual-voltage (1.70-1.95V, 2.7-3.6V)
Card/BGA: BGA (Discrete embedded) - High density MMC
Manufacturer ID: 0x11 (Toshiba)
Product name: 032G74 (0x303332473734), rev: 0x00, serial number: 0xE286D1A4
Manufacturing date: Mar 2015
CID: 11010030 33324737 3400E286 D1A432A2
CSD: D0270032 0F5903FF FFFFFFE7 8640009A
EXT_CSD revision: 1.7 (MMC v5.0, v5.01)
Partition info:
Boot1: 4096 KiB
Boot2: 4096 KiB
RPMB: 4096 KiB
User area: 29.12 GiB(31,268,536,320 bytes)
Processing file: "gpt_main0.bin"... Applying patch: Update last partition 56 'grow' with actual size in Primary Header....Done.
Applying patch: Update Primary Header with LastUseableLBA....Done.
Applying patch: Update Primary Header with BackupGPT Header Location....Done.
Applying patch: Update Primary Header with CRC of Partition Array....Done.
Applying patch: Zero Out Header CRC in Primary Header....Done.
Applying patch: Update Primary Header with CRC of Primary Header....Done.
Writing PrimaryGPT at 0x00000000 (34 sectors)... Done in 0.039 s
Processing file: "pmic.mbn"... Writing pmic at 0x07000000 (74 sectors)... Done in 0.080 s
Processing file: "sbl1.mbn"... Writing sbl1 at 0x07080000 (1151 sectors)... Done in 1.234 s
Processing file: "tz.mbn"... Writing tz at 0x07180000 (1121 sectors)... Done in 1.201 s
Processing file: "sdi.mbn"... Writing sdi at 0x07280000 (56 sectors)... Done in 0.061 s
Processing file: "hyp.mbn"... Writing hyp at 0x07300000 (185 sectors)... Done in 0.212 s
Processing file: "rpm.mbn"... Writing rpm at 0x07380000 (375 sectors)... Done in 0.406 s
Processing file: "emmc_appsboot.mbn"... Writing aboot at 0x07400000 (1272 sectors)... Done in 1.368 s
Processing file: "laf.img"... Writing laf at 0x0C000000 (77036 sectors)... Done in 1 min 21.868 s
Processing file: "gpt_backup0.bin"... Applying patch: Update last partition 56 'grow' with actual size in Backup Header....Done.
Applying patch: Update Backup Header with LastUseableLBA....Done.
Applying patch: Update Backup Header with CurrentLBA....Done.
Applying patch: Update Backup Header with Partition Array Location....Done.
Applying patch: Update Backup Header with CRC of Partition Array....Done.
Applying patch: Zero Out Header CRC in Backup Header....Done.
Applying patch: Update Backup Header with CRC of Backup Header....Done.
Writing BackupGPT at 0x8F7FFFBE00 (33 sectors)... cmd response: 0x80000900, card status: 0x80000000, card state: 4 (Card is in transfer state)
status: The command’s address argument was out of the allowed range for this card.
Connection status: XHCI:HUB3:USB 2.0 High-Speed
Interface: UFI High-Speed
Serial number: 0011-8839-8264
Boot version: 1.04, FW version: 1.12 (Jun 7 2018 00:06:47)
Insertion test... Done.
Init bus...
VCC: 3.3 V, VCCQ: 1.8 V
Bus: 1 bit (SDR 4MHz)
Access mode: sector mode
Power supply: dual-voltage (1.70-1.95V, 2.7-3.6V)
Card/BGA: BGA (Discrete embedded) - High density MMC
Manufacturer ID: 0x11 (Toshiba)
Product name: 032G74 (0x303332473734), rev: 0x00, serial number: 0xE286D1A4
Manufacturing date: Mar 2015
CID: 11010030 33324737 3400E286 D1A432A2
CSD: D0270032 0F5903FF FFFFFFE7 8640009A
EXT_CSD revision: 1.7 (MMC v5.0, v5.01)
Partition info:
Boot1: 4096 KiB
Boot2: 4096 KiB
RPMB: 4096 KiB
User area: 29.12 GiB(31,268,536,320 bytes)
Processing file: "gpt_main0.bin"... Applying patch: Update last partition 56 'grow' with actual size in Primary Header....Done.
Applying patch: Update Primary Header with LastUseableLBA....Done.
Applying patch: Update Primary Header with BackupGPT Header Location....Done.
Applying patch: Update Primary Header with CRC of Partition Array....Done.
Applying patch: Zero Out Header CRC in Primary Header....Done.
Applying patch: Update Primary Header with CRC of Primary Header....Done.
Writing PrimaryGPT at 0x00000000 (34 sectors)... Done in 0.038 s
Processing file: "pmic.mbn"... Writing pmic at 0x07000000 (74 sectors)... Done in 0.080 s
Processing file: "sbl1.mbn"... Writing sbl1 at 0x07080000 (1151 sectors)... Done in 1.224 s
Processing file: "tz.mbn"... Writing tz at 0x07180000 (1121 sectors)... Done in 1.193 s
Processing file: "sdi.mbn"... Writing sdi at 0x07280000 (56 sectors)... Done in 0.061 s
Processing file: "hyp.mbn"... Writing hyp at 0x07300000 (185 sectors)... Done in 0.197 s
Processing file: "rpm.mbn"... Writing rpm at 0x07380000 (375 sectors)... Done in 0.398 s
Processing file: "emmc_appsboot.mbn"... Writing aboot at 0x07400000 (1272 sectors)... Done in 1.358 s
Processing file: "laf.img"... Writing laf at 0x0C000000 (77036 sectors)... Done in 1 min 21.864 s
Writing boot partition config to 0x38... Done.
Connection status: XHCI:HUB3:USB 2.0 High-Speed
Interface: UFI High-Speed
Serial number: 0011-8839-8264
Boot version: 1.04, FW version: 1.12 (Jun 7 2018 00:06:47)
Insertion test... Done.
Init bus...
VCC: 3.3 V, VCCQ: 1.8 V
Bus: 1 bit (SDR 4MHz)
Access mode: sector mode
Power supply: dual-voltage (1.70-1.95V, 2.7-3.6V)
Card/BGA: BGA (Discrete embedded) - High density MMC
Manufacturer ID: 0x11 (Toshiba)
Product name: 032G74 (0x303332473734), rev: 0x00, serial number: 0xE286D1A4
Manufacturing date: Mar 2015
CID: 11010030 33324737 3400E286 D1A432A2
CSD: D0270032 0F5903FF FFFFFFE7 8640009A
EXT_CSD revision: 1.7 (MMC v5.0, v5.01)
Partition info:
Boot1: 4096 KiB
Boot2: 4096 KiB
RPMB: 4096 KiB
User area: 29.12 GiB(31,268,536,320 bytes)
Cache size: 4 MiB
Hardware reset function: 1
Partition configuration: 0x38
No boot acknowledge is sent (default)
User area is enabled for boot
Partitioning support: 0x07
Device support partitioning feature
Device can have enhanced technological features
Device partitioning possible
Boot configuration protection: 0x00
Boot bus conditions: 0x00
Boot area write protection: 0x00
Power-on write protection: possible
Permanent write protection: possible
Lock status: not locked
crypto state: encrypted?
Selected: [TOSHIBA] eSD THGBM5G8A4JBAIR/32GB (BGA153)
