INFO
Connection status: IUSB3HUB:USB 2.0 High-Speed
Interface: UFI High-Speed
Serial number: 0011-8840-6029
Boot version: 1.04, FW version: 1.12 (Jun 7 2018 00:06:47)
Insertion test... Done.
Init bus...
VCC: 3.3 V, VCCQ: 1.8 V
Bus: 1 bit (SDR 4MHz)
Access mode: sector mode
Power supply: dual-voltage (1.70-1.95V, 2.7-3.6V)
Card/BGA: BGA (Discrete embedded) - High density MMC
Manufacturer ID: 0x45 (SanDisk)
Product name: SEM08G (0x53454d303847), rev: 0x1C, serial number: 0x02A2BAFE
Manufacturing date: Jul 2014
CID: 45010053 454D3038 471C02A2 BAFE71D6
CSD: D00F0032 0F5903FF FFFFFFFF 8A40407E
EXT_CSD revision: 1.6 (MMC v4.5, v4.51)
Partition info:
Boot1: 2048 KiB
Boot2: 2048 KiB
RPMB: 2048 KiB
User area: 7.28 GiB(7,818,182,656 bytes)
Cache size: 1 MiB
Partition configuration: 0x00
No boot acknowledge is sent (default)
Device is not boot-enabled (default)
Partitioning support: 0x05
Device support partitioning feature
Device cannot have enhanced technological features
Device partitioning possible
Boot configuration protection: 0x00
Boot bus conditions: 0x00
Boot area write protection: 0x00
Power-on write protection: possible
Permanent write protection: possible
Lock status: not locked
Selected: [SanDisk] iNAND SDIN8DE2-8G (BGA153)
FLASH ERROR
Connection status: IUSB3HUB:USB 2.0 High-Speed
Interface: UFI High-Speed
Serial number: 0011-8840-6029
Boot version: 1.04, FW version: 1.12 (Jun 7 2018 00:06:47)
Insertion test... Done.
Init bus...
VCC: 3.3 V, VCCQ: 1.8 V
Bus: 1 bit (SDR 4MHz)
Access mode: sector mode
Power supply: dual-voltage (1.70-1.95V, 2.7-3.6V)
Card/BGA: BGA (Discrete embedded) - High density MMC
Manufacturer ID: 0x45 (SanDisk)
Product name: SEM08G (0x53454d303847), rev: 0x1C, serial number: 0x02A2BAFE
Manufacturing date: Jul 2014
CID: 45010053 454D3038 471C02A2 BAFE71D6
CSD: D00F0032 0F5903FF FFFFFFFF 8A40407E
EXT_CSD revision: 1.6 (MMC v4.5, v4.51)
Partition info:
Boot1: 2048 KiB
Boot2: 2048 KiB
RPMB: 2048 KiB
User area: 7.28 GiB(7,818,182,656 bytes)
Processing file: "gpt_backup0.bin"... Skipped
Processing file: "gpt_main0.bin"...
Applying patch: Update last partition 29 'userdata' with actual size in Primary Header....Done.
Applying patch: Update Primary Header with LastUseableLBA....Done.
Applying patch: Update Primary Header with BackupGPT Header Location....Done.
Applying patch: Update Primary Header with CRC of Partition Array....Done.
Applying patch: Zero Out Header CRC in Primary Header....Done.
Applying patch: Update Primary Header with CRC of Primary Header....Done.
Writing PrimaryGPT at 0x00000000 (34 sectors)... Failed to write block 0x00000000:17408 (return code: 1, CMD Error: Timeout)
cmd response: 0xC00, card status: 0x0, card state: 6 (Card is receiving operation information)
status: unknown (0)
