Hi
I am new in emmc field but many time I see that in last flashing failed and show this error.
I try to find solution but couldn't find
Here is the logs:
Connection status: IUSB3HUB:USB 2.0 High-Speed
Interface: UFI High-Speed
Serial number: 0011-8840-1707
Boot version: 1.04, FW version: 1.10 (Mar 26 2017 14:24:34)
Insertion test... Done.
Init bus...
VCC: 3.3 V, VCCQ: 3.0 V
Bus: 8 bit (HS SDR 24MHz)
Access mode: sector mode
Power supply: dual-voltage (1.70-1.95V, 2.7-3.6V)
Card/BGA: BGA (Discrete embedded) - High density MMC
Manufacturer ID: 0x90 (SK Hynix)
Product name: HBG4a2 (0x484247346132), rev: 0xA5, serial number: 0x46580C87
Manufacturing date: Jul 2017
CID: 90014A48 42473461 32A54658 0C8774DA
CSD: D0270132 8F5903FF FFFFFFE7 8A400016
EXT_CSD revision: 1.8 (MMC v5.1)
Partition info:
Boot1: 4096 KiB
Boot2: 4096 KiB
RPMB: 4096 KiB
User area: 29.12 GiB(31,268,536,320 bytes)
Processing file: "gpt_main0.bin"...
Applying patch: Update last partition 49 'userdata' with actual size in Primary Header....Done.
Applying patch: Update Primary Header with LastUseableLBA....Done.
Applying patch: Update Primary Header with BackupGPT Header Location....Done.
Applying patch: Update Primary Header with CRC of Partition Array....Done.
Applying patch: Zero Out Header CRC in Primary Header....Done.
Applying patch: Update Primary Header with CRC of Primary Header....Done.
Writing PrimaryGPT at 0x00000000 (34 sectors)... Done in 0.033 s
Processing file: "NON-HLOS.bin"...
Writing modem at 0x04000000 (172032 sectors)... Done in 7.615 s
Processing file: "sbl1.mbn"...
Writing sbl1 at 0x0C002400 (665 sectors)... Done in 0.031 s
Processing file: "sbl1.mbn"...
Writing sbl1bak at 0x0C082400 (665 sectors)... Done in 0.029 s
Processing file: "rpm.mbn"...
Writing rpm at 0x0C102400 (332 sectors)... Done in 0.014 s
Processing file: "rpm.mbn"...
Writing rpmbak at 0x0C182400 (332 sectors)... Done in 0.013 s
Processing file: "tz.mbn"...
Writing tz at 0x0C202400 (2647 sectors)... Done in 0.113 s
Processing file: "tz.mbn"...
Writing tzbak at 0x0C402400 (2647 sectors)... Done in 0.112 s
Processing file: "devcfg.mbn"...
Writing devcfg at 0x0C602400 (104 sectors)... Done in 0.004 s
Processing file: "devcfg.mbn"...
Writing devcfgbak at 0x0C642400 (104 sectors)... Done in 0.004 s
Processing file: "adspso.bin"...
Writing dsp at 0x0C682400 (32768 sectors)... Done in 1.430 s
Processing file: "splash.img"...
Writing splash at 0x14000000 (10802 sectors)... Done in 0.561 s
Processing file: "emmc_appsboot.mbn"...
Writing aboot at 0x18000000 (1135 sectors)... Done in 0.073 s
Processing file: "emmc_appsboot.mbn"...
Writing abootbak at 0x18100000 (1135 sectors)... Done in 0.046 s
Processing file: "boot.img"...
Writing boot at 0x18200000 (41387 sectors)... Done in 2.436 s
Processing file: "recovery.img"...
Writing recovery at 0x1C200000 (44903 sectors)... Done in 2.240 s
Processing file: "system.img"...
Writing sparse image system at 0x20300000 (6291072 sectors)... Done in 4 mins 9.883 s
Processing file: "cache.img"...
Writing sparse image cache at 0xE4000000 (524288 sectors)... Done in 0.599 s
Processing file: "persist.img"...
Writing sparse image persist at 0xF4000000 (65536 sectors)... Done in 0.456 s
Processing file: "lksecapp.mbn"...
Writing lksecapp at 0x104000000 (113 sectors)... Done in 0.004 s
Processing file: "lksecapp.mbn"...
Writing lksecappbak at 0x104020000 (113 sectors)... Done in 0.005 s
Processing file: "cmnlib.mbn"...
Writing cmnlib at 0x104040000 (386 sectors)... Done in 0.017 s
Processing file: "cmnlib.mbn"...
Writing cmnlibbak at 0x104080000 (386 sectors)... Done in 0.017 s
Processing file: "cmnlib64.mbn"...
Writing cmnlib64 at 0x1040C0000 (484 sectors)... Done in 0.020 s
Processing file: "cmnlib64.mbn"...
Writing cmnlib64bak at 0x104100000 (484 sectors)... Done in 0.019 s
Processing file: "keymaster.mbn"...
Writing keymaster at 0x104140000 (442 sectors)... Done in 0.019 s
Processing file: "keymaster.mbn"...
Writing keymasterbak at 0x104180000 (442 sectors)... Done in 0.018 s
Processing file: "cust.img"...
Writing sparse image cust at 0x108082000 (1048576 sectors)... Done in 25.456 s
Processing file: "userdata.img"...
Writing sparse image userdata at 0x128082000 (20775880 sectors)... Done in 12.870 s
Processing file: "gpt_backup0.bin"...
Applying patch: Update last partition 49 'userdata' with actual size in Backup Header....Done.
Applying patch: Update Backup Header with LastUseableLBA....Done.
Applying patch: Update Backup Header with CurrentLBA....Done.
Applying patch: Update Backup Header with Partition Array Location....Done.
Applying patch: Update Backup Header with CRC of Partition Array....Done.
Applying patch: Zero Out Header CRC in Backup Header....Done.
Applying patch: Update Backup Header with CRC of Backup Header....Done.
Writing BackupGPT at 0x8F7FFFBE00 (33 sectors)... Failed to write block 0x8F7FFFBE00:16896 (return code: 4, CMD Error: Invalid response)
cmd response: 0x80000900, card status: 0x80000000, card state: 4 (Card is in transfer state)
status: The command’s address argument was out of the allowed range for this card.
If any body have solution then please share