Failed to initialize eMMC (return code: 17, CMD Error: Timeout) !!! CMD1 error, cmd response: 0x0, card state: 255 (Card is in unknown state) SEND_OP_COND command failed. --- Check eMMC pins and connection --- --- Try to select correct VCC/VCCQ manually --- --- Try to decrease the clock speed ---
Check eMMC pins and connection. Add external power when necessary. Probably from usb
Thats maybe pin not conected properly or maybe emmc broken.
log says that it cant detect the emmc, at all, this case is rare (fully dead chip), mostly this log came up because the lines arent connected properly. please double check the lines, make sure they are PROPERLY and CORRECTLY connected to the pinout.
