Hi Pros,
I've been trying to flash redmi note 5 pro (whyred latest version 10.3.5) (emmc chip only). after flashed, it was successful but couldn't get through and stuck in 9008 mode. so I took chip off again and identify emmc again. the result show as below.
Bus: 8 bit (HS SDR 52MHz)
Access mode: sector mode
Power supply: dual-voltage (1.70-1.95V, 2.7-3.6V)
Card/BGA: BGA (Discrete embedded) - High density MMC
Manufacturer ID: 0x90 (SK Hynix)
Product name: HCG8a4 (0x484347386134), rev: 0xA2, serial number: 0x49B65897
Manufacturing date: Jan 2018
CID: 90014A48 43473861 34A249B6 58971548
CSD: D0270132 8F5903FF FFFFFFEF 8A400026
EXT_CSD revision: 1.8 (MMC v5.1)
Partition info:
Boot1: 4096 KiB
Boot2: 4096 KiB
RPMB: 4096 KiB
User area: 58.24 GiB(62,537,072,640 bytes)
Cache size: 1 MiB
Hardware reset function: 1
Partition configuration: 0x38
No boot acknowledge is sent (default)
User area is enabled for boot
Partitioning support: 0x07
Device support partitioning feature
Device can have enhanced technological features
Device partitioning possible
Boot configuration protection: 0x00
Boot bus conditions: 0x00
Boot area write protection: 0x00
Power-on write protection: possible
Permanent write protection: possible
Lock status: not locked
ANDROID System Info:
platform: sdm660, cpu abi: arm64-v8a
manufacturer: Xiaomi
board: sdm636, name: whyred
brand: xiaomi, model: Redmi Note 5
build model list: Redmi Note 5
build id: PKQ1.180904.001, version: 8.1.0 Oreo (PKQ1.180904.001)
build description: whyred-user 9 PKQ1.180904.001 V10.3.5.0.PEICNXM release-keys
Internal storage: 10 GiB
crypto state: unencrypted
Selected: [HYNIX] H9TQ52ACLTMCUR/64GB (BGA221)
I don't know why I got internal storage: 10GiB at the end of the result. What I notice is if I got that "internal sotrage 10GiB" I can't boot up. because I took off another chip from another good machine and I tried to identify. there is no "internal storage 10 GiB". Why is that happen and how can I fix it.
