Connection status: EHCI:HUB:HUB:HUB:USB 2.00 High-Speed
Interface: UFI High-Speed
Serial number: 0011-8841-7305
Boot version: 1.05, FW version: 1.13 (Aug 19 2019 23:46:09)
Insertion test... Done
Init bus...
VCC: 3.3 V, VCCQ: 3.0 V
Bus: 8 bit (HS SDR 24MHz)
Access mode: sector mode
Power supply: dual-voltage (1.70-1.95V, 2.7-3.6V)
Card/BGA: BGA (Discrete embedded) - High density MMC
Manufacturer ID: 0x45 (SanDisk)
Product name: SEM04G (0x53454d303447), rev: 0x28, serial number: 0x5410B767
Manufacturing date: Nov 2014
CID: 45010053 454D3034 47285410 B767B1A6
CSD: D00F0032 0F5903FF FFFFFDFF 8A4040A6
EXT_CSD revision: 1.6 (MMC v4.5, v4.51)
Partition info:
Boot1: 2048 KiB
Boot2: 2048 KiB
RPMB: 2048 KiB
User area: 3.69 GiB(3,959,422,976 bytes)
Hardware reset function: 1
Partition configuration: 0x48
Boot acknowledge is sent during the boot operation
Boot partition 1 is enabled for boot
Partitioning support: 0x01
Device support partitioning feature
Device cannot have enhanced technological features
Device partitioning possible
Boot configuration protection: 0x00
Boot bus conditions: 0x00
Boot area write protection: 0x00
Power-on write protection: possible
Permanent write protection: possible
Lock status: not locked
crypto state: encrypted?
Selected: [SanDisk] iNAND SDIN9DW4-64G (BGA153)
Connection status: EHCI:HUB:HUB:HUB:USB 2.00 High-Speed
Interface: UFI High-Speed
Serial number: 0011-8841-7305
Boot version: 1.05, FW version: 1.13 (Aug 19 2019 23:46:09)
Insertion test... Done
Init bus...
VCC: 3.3 V, VCCQ: 3.0 V
Bus: 8 bit (HS SDR 24MHz)
Access mode: sector mode
Power supply: dual-voltage (1.70-1.95V, 2.7-3.6V)
Card/BGA: BGA (Discrete embedded) - High density MMC
Manufacturer ID: 0x45 (SanDisk)
Product name: SEM04G (0x53454d303447), rev: 0x28, serial number: 0x5410B767
Manufacturing date: Nov 2014
CID: 45010053 454D3034 47285410 B767B1A6
CSD: D00F0032 0F5903FF FFFFFDFF 8A4040A6
EXT_CSD revision: 1.6 (MMC v4.5, v4.51)
Partition info:
Boot1: 2048 KiB
Boot2: 2048 KiB
RPMB: 2048 KiB
User area: 3.69 GiB(3,959,422,976 bytes)
Current partition access:
Access to boot partition 1
Loading file: "\%BACKUPS%\Discoveri-y\D-5(LMY47I_test-keys-5.1-LMY47I)[SDIN9DW4-64G_5410B767]\boot1.bin", size: 2 MiB...
Writing boot1 (4096 sectors)... Done in 0.221 s
Current partition access:
Access to boot partition 2
Loading file: "\%BACKUPS%\Discoveri-y\D-5(LMY47I_test-keys-5.1-LMY47I)[SDIN9DW4-64G_5410B767]\boot2.bin", size: 2 MiB...
Writing boot2 (4096 sectors)... Done in 0.216 s
Current partition access:
Access to user area
Loading file: "\%BACKUPS%\Discoveri-y\D-5(LMY47I_test-keys-5.1-LMY47I)[SDIN9DW4-64G_5410B767]\userarea_512MiB.bin", size: 512 MiB...
Writing userarea (1048576 sectors)... Done in 1 min 22.180 s
Loading file: "\%BACKUPS%\Discoveri-y\D-5(LMY47I_test-keys-5.1-LMY47I)[SDIN9DW4-64G_5410B767]\ext_csd.bin", size: 512 bytes...
Writing extcsd, 512 bytes... Done
Failed to initialize eMMC (return code: 6, CMD Error: Invalid Voltage Range) !!!
CMD1 error, cmd response: 0xFF8080, card state: 255 (Card is in unknown state)
SEND_OP_COND command failed.
