hello can you help
bought new mmc
should be User area: 3.69 GiB(3,959,422,976 bytes)
identify eMMc
User area: 1.84 GiB(1,979,711,488 bytes) at 0x00000000 (enhanced)
User area: 0 B(2,197,043,544,064 bytes)
I can not write
User area write protection: 0x50
I applied eMMC factory erase
Toshiba mmc frimware Is there
THGBMAG5A1JBAIR
Connection status: EHCI:HUB:HUB:USB 2.00 High-Speed
Interface: UFI High-Speed
Serial number: 0011-8840-xxxx
Boot version: 1.04, FW version: 1.13 (Aug 19 2019 23:46:09)
Insertion test... Done
Init bus...
VCC: 3.3 V, VCCQ: 3.0 V
Bus: 4 bit (SDR 3MHz)
Access mode: sector mode
Power supply: dual-voltage (1.70-1.95V, 2.7-3.6V)
Card/BGA: BGA (Discrete embedded) - High density MMC
Manufacturer ID: 0x11 (Toshiba)
Product name: 004G90 (0x303034473930), rev: 0x51, serial number: 0x5E8DF564
Manufacturing date: May 2014
CID: 11010030 30344739 30515E8D F56451C0
CSD: D00E0032 0F5903FF FFFFFFE7 92400074
EXT_CSD revision: 1.6 (MMC v4.5, v4.51)
Partition info:
Boot1: 2048 KiB (enhanced)
Boot2: 2048 KiB (enhanced)
RPMB: 512 KiB (enhanced)
User area: 1.84 GiB(1,979,711,488 bytes) at 0x00000000 (enhanced)
User area: 0 B(2,197,043,544,064 bytes)
Hardware reset function: 1
Partition configuration: 0x48
Boot acknowledge is sent during the boot operation
Boot partition 1 is enabled for boot
Partitioning support: 0x07
Device support partitioning feature
Device can have enhanced technological features
Device partitioning completed
Boot configuration protection: 0x00
Boot bus conditions: 0x02
Bus width: x8 (sdr/ddr), boot mode: sdr(default), reset bus width to x1 sdr(default)
Boot area write protection: 0x00
Power-on write protection: possible
Permanent write protection: possible
Lock status: not locked
User area write protection: 0x50
Password protection features: enabled
Power-on write protection: possible
Permanent write protection: not possible
Lock status: not locked
