Connection status: EHCI:HUB:USB 2.00 High-Speed
Interface: UFI High-Speed
Serial number: 0011-8841-5004
Boot version: 1.05, FW version: 1.13 (Aug 19 2019 23:46:09)
Insertion test... Done
VCCQ not properly connected
Init bus...
VCC: 3.3 V, VCCQ: 1.8 V
Bus: 1 bit (SDR 24MHz)
Access mode: sector mode
Power supply: dual-voltage (1.70-1.95V, 2.7-3.6V)
Card/BGA: BGA (Discrete embedded) - High density MMC
Manufacturer ID: 0x90 (SK Hynix)
Product name: HCG8a4 (0x484347386134), rev: 0xA2, serial number: 0x1FC938B7
Manufacturing date: Jun 2018
CID: 90014A48 43473861 34A21FC9 38B765CA
CSD: D0270132 8F5903FF FFFFFFEF 8A400026
EXT_CSD revision: 1.8 (MMC v5.1)
Partition info:
Boot1: 4096 KiB
Boot2: 4096 KiB
RPMB: 4096 KiB
User area: 58.24 GiB(62,537,072,640 bytes)
Reading PrimaryGPT at 0x00000000-0x00007FFF size: 32 KiB... Done in 0.013 s
File saved to "\%BACKUPS%\OPPO\CPH1823(CPH1823EX_11_C.14-9-PPR1.180610.011)[H9TQ52ACLTMCUR_1FC938B7]\user_part\PrimaryGPT.img" (CRC32: 0x2B3CA9B1)
Blank checking: NOT blank
Reading oppo_custom at 0x06788000-0x06887FFF size: 1 MiB... Done in 0.412 s
File saved to "\%BACKUPS%\OPPO\CPH1823(CPH1823EX_11_C.14-9-PPR1.180610.011)[H9TQ52ACLTMCUR_1FC938B7]\user_part\oppo_custom.img" (CRC32: 0x545F8763)
Blank checking: NOT blank
Reading nvdata at 0x09D88000-0x0DD87FFF size: 64 MiB... Failed to read block 0x0BC78000:65536 (return code: 1, CMD Error: Timeout)
cmd response: 0x900, card status: 0x0, card state: 4 (Card is in transfer state)
status: unknown (0)
--- Make sure the connection between BOX and eMMC stable ---
--- please try again (you may RESUME the read process) ---
Auto retry...
Failed to read block 0x12E88000:65536 (return code: 1, CMD Error: Timeout)
cmd response: 0x900, card status: 0x0, card state: 4 (Card is in transfer state)
status: unknown (0)
--- Make sure the connection between BOX and eMMC stable ---
--- please try again (you may RESUME the read process) ---
Auto retry...
Failed to read block 0x1A7F8000:65536 (return code: 1, CMD Error: Timeout)
cmd response: 0x900, card status: 0x0, card state: 4 (Card is in transfer state)
status: unknown (0)
--- Make sure the connection between BOX and eMMC stable ---
--- please try again (you may RESUME the read process) ---
Auto retry...
