j500fn hang on logo help me sir.......
Connection status: EHCI:HUB:HUB:USB 2.00 High-Speed
Interface: UFI High-Speed
Serial number: 0011-8840-6050
Boot version: 1.04, FW version: 1.13 (Aug 19 2019 23:46:09)
Insertion test... Done
Init bus...
VCC: 3.3 V, VCCQ: 1.8 V
Bus: 1 bit (SDR 4MHz)
Access mode: sector mode
Power supply: dual-voltage (1.70-1.95V, 2.7-3.6V)
Card/BGA: BGA (Discrete embedded) - High density MMC
Manufacturer ID: 0x90 (SK Hynix)
Product name: H8G4u (0x483847347521), rev: 0x01, serial number: 0x17995106
Manufacturing date: Nov 2015
CID: 90014A48 38473475 21011799 5106B2BC
CSD: D07F0132 0F5903FF FFFFFFEF 8A400012
EXT_CSD revision: 1.7 (MMC v5.0, v5.01)
Partition info:
Boot1: 4096 KiB
Boot2: 4096 KiB
RPMB: 4096 KiB
User area: 7.28 GiB(7,818,182,656 bytes)
Cache size: 1 MiB
Hardware reset function: 1
Partition configuration: 0x00
No boot acknowledge is sent (default)
Device is not boot-enabled (default)
Partitioning support: 0x07
Device support partitioning feature
Device can have enhanced technological features
Device partitioning completed
Boot configuration protection: 0x00
Boot bus conditions: 0x00
Boot area write protection: 0x00
Power-on write protection: possible
Permanent write protection: possible
Lock status: not locked
User area write protection: 0x10
Password protection features: enabled
Power-on write protection: possible
Permanent write protection: not possible
Lock status: not locked
eMMC 5.x HEALTH report:
Device lifetime: Urgent (Consumed 90% of the reserved block)
Estimation of the device lifetime (SLC): 0% - 10% device life time used
Estimation of the device lifetime (MLC): 10% - 20% device life time used
https://www.youtube.com/watch?v=3vMeb2EhEhA
