Boot version: 1.04, FW version: 1.13 (Aug 19 2019 23:46:09)
Insertion test... Done
Init bus...
VCC: 3.3 V, VCCQ: 1.8 V
Bus: 1 bit (SDR 4MHz)
Access mode: sector mode
Power supply: dual-voltage (1.70-1.95V, 2.7-3.6V)
Card/BGA: BGA (Discrete embedded) - High density MMC
Manufacturer ID: 0x15 (Samsung)
Product name: BJTD4R (0x424a54443452), rev: 0x00, serial number: 0x4C58CCBE
Manufacturing date: 六月 2019
CID: 15010042 4A544434 52004C58 CCBE6604
CSD: D0270132 0F5903FF F6DBFFEF 8E40400C
EXT_CSD revision: 1.8 (MMC v5.1)
Partition info:
Boot1: 4096 KiB
Boot2: 4096 KiB
RPMB: 16384 KiB
User area: 29.12 GiB(31,268,536,320 bytes)
Cache size: 64 MiB
Hardware reset function: 1
Partition configuration: 0x48
Boot acknowledge is sent during the boot operation
Boot partition 1 is enabled for boot
Partitioning support: 0x07
Device support partitioning feature
Device can have enhanced technological features
Device partitioning possible
Boot configuration protection: 0x00
Boot bus conditions: 0x01
Bus width: x4 (sdr/ddr), boot mode: sdr(default), reset bus width to x1 sdr(default)
Boot area write protection: 0x00
Power-on write protection: possible
Permanent write protection: possible
Lock status: not locked
User area write protection: 0x10
Password protection features: enabled
Power-on write protection: possible
Permanent write protection: not possible
Lock status: not locked
ANDROID System Info:
platform: exynos5, cpu abi: armeabi-v7a
manufacturer: samsung
board: universal7885, name: a10xx
brand: samsung, model: SM-A105FN
build model list: SM-A105FN
build id: PPR1.180610.011, version: 9 Pie (PPR1.180610.011.A105FNXXU2ASF4)
build description: a10xx-user 9 PPR1.180610.011 A105FNXXU2ASF4 release-keys
crypto state: encrypted?
crypto state: encrypted?
Custom moviNAND command is not supported for this device(MMC51).
Detected: SAMSUNG moviNAND KMBJT000D4-RXXX/32G
Connection status: IUSB3HUB:USB 2.00 High-Speed
Interface: UFI High-Speed
Serial number: 0011-8839-1850
Boot version: 1.04, FW version: 1.13 (Aug 19 2019 23:46:09)
Insertion test... Done
Init bus...
VCC: 3.3 V, VCCQ: 1.8 V
Bus: 1 bit (SDR 4MHz)
Access mode: sector mode
Power supply: dual-voltage (1.70-1.95V, 2.7-3.6V)
Card/BGA: BGA (Discrete embedded) - High density MMC
Manufacturer ID: 0x15 (Samsung)
Product name: BJTD4R (0x424a54443452), rev: 0x00, serial number: 0x4C58CCBE
Manufacturing date: 六月 2019
CID: 15010042 4A544434 52004C58 CCBE6604
CSD: D0270132 0F5903FF F6DBFFEF 8E40400C
EXT_CSD revision: 1.8 (MMC v5.1)
Partition info:
Boot1: 4096 KiB
Boot2: 4096 KiB
RPMB: 16384 KiB
User area: 29.12 GiB(31,268,536,320 bytes)
Processing file: "COMBINATION_FAC_FA90_A105FNXXU2ASJ1_FACFAC_CL15845725_QB26503821_REV00_user_mid_noship.tar.md5\sboot.bin", size: 4 MiB...
Extracting sboot.bin... Done
Current partition access:
Access to boot partition 1
Writing BOOTLOADER at 0x00000000-0x003FFFFF (8192 sectors)... cmd response: 0xD00, card status: 0x0, card state: 6 (Card is receiving operation information)
status: unknown (0)
Writing boot partition config to 0x48... [179]Failed to Switch (return code: 1, CMD Error: Timeout) !!!
Done
Writing boot bus conditions to 0x01... [177]Failed to Switch (return code: 1, CMD Error: Timeout) !!!
its mdm of a105fn,i can read dump,i can erase,but cant write
whats the solution?
