why i need to pay 2 times for one phone ????
i just need to connect and than do factory reset in special tab,but after identify need to pay for another one auth.....
MTE4NTUxNzc1Nw==
nixel2512@gmail.com
MF04612111775
MF00406764846
Please "Identify Device" at first, before any other operation.
storage type: UFS
overview:
- Flashing, erase frp, erase userdata supported
for Exynos platform, go to \FLASH:FASTBOOT
for Qualcomm platform, go to \FLASH:QUALCOMM
for MediaTek platform, go to \FLASH:MEDIATEK
- Flashing requires bootloader authorization by server
- Unlock bootloader supported for some Qualcomm and Exynos devices via \FASTBOOT:SpecialTask
- Any Bootloader authorization will consume credit, use it with caution at your own risk !!!
- To avoid any troubles, please always use official firmware !!!
- Flashing requires server authentication and UFI CREDIT, goto \ACCOUNT for the list of services and costs
!!! WARNING !!!
- Authorization should only be used for normal flashing with official firmware that match to your model
- Special Tasks are bonus feature, if it fails you can not claim a refund
Reset Flyme Account Lock was released for old models, it will not work for new model.
Any Special Tasks in MediaTek platform require write access and will not work for this model due to secure boot.
- Service cost for [Meizu] M1793:
MEIZU_FL(Bootloader Authorization(QC, MTK, EXYNOS) - Including Identify, Flashing, SpecialTask): 6 credits
MEIZU_UBL(Unlock Bootloader(QC, MTK, EXYNOS)): 12 credits
Make sure to than the phone is powered off before connecting to PC !
Make sure to select the CORRECT phone model and storage type !
Do not rename the phone model directory !
Every Special Tasks will needs to use Bootloader Authorization, you pay for authorization not the specific task !!!
You have to select the CORRECT firmware that match your phone model before Identify !!!
AUTH info: MTK, version: 1
BROM version[0]: 7.1625.3.0
DA: MTK_AllInOne_DA[oem_v21].bin
hash: 7e3d2880bd74e71929ccd9ea45c66f7d3e8f9532, size: 8.09 MiB
version: 3.3001.00.00, start addr: 0x40000800
Connecting to BootROM...
Power off the phone, disconnect and reconnect the battery(if possible) and connect USB cable...
Hold the VOL DOWN to force MediaTek BootROM.
Scanning BootROM or Preloader port(30 s)... Done
Detected [BootROM] MediaTek USB Port (COM357)
Connection status: XHCI:HUB3:USB 2.00 High-Speed
USB Driver: [MediaTek Inc.] usbser, version: 2.0.1136.0, date: 9-1-2011
Connecting Bootrom...
Platform: MT6798_S01, Hw ver: 0xCB00, Sw ver: 0x0001
AUTH info: MTK, version: 1
BROM version[0]: 7.1625.3.0
DA: MTK_AllInOne_DA[oem_v21].bin
hash: 7e3d2880bd74e71929ccd9ea45c66f7d3e8f9532, size: 8.09 MiB
version: 3.3001.00.00, start addr: 0x40000800
Connecting to BootROM...
Power off the phone, disconnect and reconnect the battery(if possible) and connect USB cable...
Hold the VOL DOWN to force MediaTek BootROM.
Scanning BootROM or Preloader port(30 s)... Done
Detected [BootROM] MediaTek USB Port (COM357)
Connection status: XHCI:HUB3:USB 2.00 High-Speed
USB Driver: [MediaTek Inc.] usbser, version: 2.0.1136.0, date: 9-1-2011
Connecting Bootrom...
Platform: MT6798_S01, Hw ver: 0xCB00, Sw ver: 0x0001
AUTH info: MTK, version: 1
BROM version[1]: 7.1917.3.0
DA: MTK_AllInOne_DA[oem_v21].bin
hash: 7e3d2880bd74e71929ccd9ea45c66f7d3e8f9532, size: 8.09 MiB
version: 3.3001.00.00, start addr: 0x40000800
Connecting to BootROM...
Power off the phone, disconnect and reconnect the battery(if possible) and connect USB cable...
Hold the VOL DOWN to force MediaTek BootROM.
Scanning BootROM or Preloader port(30 s)... Done
Detected [BootROM] MediaTek USB Port (COM357)
Connection status: XHCI:HUB3:USB 2.00 High-Speed
USB Driver: [MediaTek Inc.] usbser, version: 2.0.1136.0, date: 9-1-2011
Connecting Bootrom...
[SERVER] MEIZU_FL [M1793,2d5de0b5ab4327aa] ref id: MF04612111775, cost: 6, your balance: 1
Sending Download Agent...
Platform: MT6799, Hw ver: 0xCB00, Sw ver: 0x0001
Secure ver: 0x00, BL ver: 0x00
Secure config: 0x00
SRAM size: 256 KiB
DRAM size: 3 GiB
SOC ID: 2d5de0b5ab4327aa037a7e2a27fa53921fd5f15c2b9bd8a1f3fac66f55547aea
ME ID: a681ab004b27cb8d1652f0fc7251922d
Storage type: UFS
CID: KLUCG4J1ED-B0C1
Fw version: 020
Capacity: 59.57 GiB(63,963,136,000 bytes)
LUN0: 4096 KiB
LUN1: 4096 KiB
LUN2: 59.56 GiB(63,954,747,392 bytes)
USB speed: Full-Speed
Switching to USB High-Speed...
Scanning DA USB High-Speed port... Done
Detected [DA] MediaTek DA USB VCOM (Android) (COM389)
Connection status: XHCI:HUB3:USB 2.00 High-Speed
USB Driver: [MediaTek Inc.] wdm_usb, version: 3.0.1504.0, date: 1-22-2015
platform: MT6799, cpu abi: arm64-v8a
manufacturer: Meizu
board: PRO7Plus, name: meizu_PRO7Plus
brand: Meizu, model: PRO 7 Plus
build id: NRD90M, version: 7.0 Nougat (Flyme 6.3.0.0G)
build description: meizu_PRO7Plus-user 7.0 NRD90M 1523467717 release-keys
Hardware version: 0x79351001
SN: 793HSDTGHVPAM
PSN: 793HZZ164A006A6B
Model: 793Q.-?.
crypto state: encrypted
You have used 1 available MEIZU_FL slot for this phone, you have 2 FREE slot left to try again in case this task fails.
You may retry the task for more times without further authorization as long as you don't unplug the USB cable, change brand or model selection or close the application.
AUTH info: MTK, version: 1
BROM version[1]: 7.1917.3.0
DA: MTK_AllInOne_DA[oem_v21].bin
hash: 7e3d2880bd74e71929ccd9ea45c66f7d3e8f9532, size: 8.09 MiB
version: 3.3001.00.00, start addr: 0x40000800
Connecting to BootROM...
Power off the phone, disconnect and reconnect the battery(if possible) and connect USB cable...
Hold the VOL DOWN to force MediaTek BootROM.
Scanning BootROM or Preloader port(30 s)... Device detected in DA boot mode, press and hold power for 10 seconds to exit DA mode
Error: timeout
AUTH info: MTK, version: 1
BROM version[1]: 7.1917.3.0
DA: MTK_AllInOne_DA[oem_v21].bin
hash: 7e3d2880bd74e71929ccd9ea45c66f7d3e8f9532, size: 8.09 MiB
version: 3.3001.00.00, start addr: 0x40000800
Connecting to BootROM...
Power off the phone, disconnect and reconnect the battery(if possible) and connect USB cable...
Hold the VOL DOWN to force MediaTek BootROM.
Scanning BootROM or Preloader port(30 s)... Done
Detected [BootROM] MediaTek USB Port (COM357)
Connection status: XHCI:HUB3:USB 2.00 High-Speed
USB Driver: [MediaTek Inc.] usbser, version: 2.0.1136.0, date: 9-1-2011
Connecting Bootrom...
[SERVER] Insufficient credits, you have 1 credits left !
Platform: MT6799, Hw ver: 0xCB00, Sw ver: 0x0001
(boot_rom.cpp, line:1279)
Bootloader authorization failed.
