redmi not 5 pro isp plz

elpringy

mi m1803e7sg isp
i found many photo but wrong dat0

madgoeslim

elpringy Hi, seems like dat0 is hidden below the cpu, its more easy to remove the chip than do ISP because its not protected by hard glue, will easy to remove using hot air gun.

elpringy

yes must pickup emmc thanks bro
nee bga 254 pinout

madgoeslim

elpringy nee bga 254 pinout

Hello,
You can check the Pinout of this BGA trough insertion test in UFi eMMC ToolBox after doing Identify eMMC with no adapter inserted.

elpringy

can fiz this
Connection status: EHCI:HUB:USB 2.00 High-Speed
Interface: UFI High-Speed
Serial number: 0011-8839-3228
Boot version: 1.04, FW version: 1.13 (Aug 19 2019 23:46:09)
Insertion test... Done
Init bus...
VCC: 2.8 V, VCCQ: 1.8 V
Bus: 1 bit (SDR 16MHz)
Access mode: sector mode
Power supply: dual-voltage (1.70-1.95V, 2.7-3.6V)
Card/BGA: Card (removable) - MMC
Manufacturer ID: 0x65 (Unknown)
Product name: MMOR (0x4d204d4f5202), rev: 0x40, serial number: 0x010012C0
Manufacturing date: ? 2013
CID: 65646F4D 204D4F52 02400100 12C000F4
Bad CID detected, eMMC might be damaged !!!
CSD: D07FFF32 0F59007F F6DB8000 1E40001C
Bad CSD detected, eMMC might be damaged !!!
EXT_CSD revision: 1.5 (MMC v4.41)
Partition info:
Boot1: 2048 KiB
Boot2: 2048 KiB
RPMB: 128 KiB
User area: 128 MiB(134,217,728 bytes)
Partition configuration: 0x78
Boot acknowledge is sent during the boot operation
User area is enabled for boot
Partitioning support: 0x03
Device support partitioning feature
Device can have enhanced technological features
Device partitioning possible
Boot configuration protection: 0x00
Boot bus conditions: 0x00
Boot area write protection: 0x14
Power-on write protection: possible
Permanent write protection: not possible
Lock status: locked permanently

madgoeslim

elpringy Product name: MMOR

Hi, this is damage emmc, not possible to repair. replace with new one if possible.