AUTH info: MTK, version: 1
Firmware package: REDMI 6
BROM version[1]: 7.1922.6.0
DA: MTK_AllInOne_DA[1].bin
hash: 29541b6af15c397977fb6c85df452c0add11ca18, size: 1.01 MiB
version: 3.3001.2019/06/02020/07/30 00:52:10, start addr: 0x40000800
Connecting to BootROM...
Power off the phone, disconnect and reconnect the battery(if possible) and connect USB cable...
Hold the VOL DOWN or VOL UP + DOWN(for newer model) to force MediaTek BootROM.
Scanning BootROM or Preloader port... Done
Detected [BootROM] MediaTek USB Port (COM3)
Connection status: XHCI:HUB3:USB 2.00 High-Speed
USB Driver: [MediaTek Inc.] wdm_usb, version: 3.0.1504.0, date: 1-22-2015
Connecting Bootrom...
[SERVER] XIAOMI_FL [cereus,c54b02d6e29c8349] ref id: XF07916203487, cost: 4, your balance: 8
Sending Download Agent...
Error: 0xC0060003 (STATUS_BROM_CMD_SEND_DA_FAIL)
[H/W] Fail to download DA to baseband chip's internal SRAM!
There's a cable communication problem or target might be shutdown unexpectedly or target lost power supply
Platform: MT6765, Hw ver: 0xCA00, Sw ver: 0x0000
Error: 0xC0060003 (STATUS_BROM_CMD_SEND_DA_FAIL)
[H/W] Fail to download DA to baseband chip's internal SRAM!
There's a cable communication problem or target might be shutdown unexpectedly or target lost power supply
send DA data error. code 0x7024
(boot_rom.cpp, line:329)
You have used 3 out of 10 slot for today.
You have used 1 available XIAOMI_FL slot for this phone, you have 2 try left to try again in case this task fails.
Please pay attention to the error messages and spesific hints before retry !!!
You are paying for authorization access and NOT the task, there is no refund for failed tasks and tasks with 3 retry
Refunds are only for failed tasks because of server issues, software issues or bugs and unknown problem with no retry !!!
We found that you have used XIAOMI_FL service with this phone at Tue, 28 Jul 2020 16:07:12 GMT.
Note that due to limited authorization slot, every authorization service will take cost.
Before using another authorization, please make sure the phone have a good working hardware and you are using the correct firmware.
You may retry the task for more times without further authorization as long as you don't unplug the USB cable, change brand or model selection or close the application.
There might be incompability problem with the firmware or loaders, please verify your flash settings.
To save flashing slots, please identify with official firmware before flashing
There is no refund for this case, you may retry after 3 hours
