Connection status: EHCI:HUB:USB 2.00 High-Speed
Interface: UFI High-Speed
Serial number: 0011-8841-1009
Boot version: 1.04, FW version: 1.13 (Aug 19 2019 23:46:09)
Insertion test... Done
Init bus...
VCC: 3.3 V, VCCQ: 1.8 V
Bus: 1 bit (SDR 4MHz)
Access mode: sector mode
Power supply: dual-voltage (1.70-1.95V, 2.7-3.6V)
Card/BGA: BGA (Discrete embedded) - High density MMC
Manufacturer ID: 0x13 (Micron)
Product name: S0J9K9 (0x53304a394b39), rev: 0x10, serial number: 0x132FF9FD
Manufacturing date: Sep 2019
CID: 13014E53 304A394B 3910132F F9FD96DE
CSD: D05F0132 8F5913FF FFFFFFEF 964000A8
EXT_CSD revision: 1.8 (MMC v5.1)
Partition info:
Boot1: 4096 KiB
Boot2: 4096 KiB
RPMB: 16384 KiB
User area: 116.48 GiB(125,074,145,280 bytes)
Factory Reset...
Creating filesystem with parameters:
Size: 452984832
Block size: 4096
Blocks per group: 32768
Inodes per group: 6912
Inode size: 256
Journal blocks: 1728
Label:
Blocks: 110592
Block groups: 4
Reserved block group size: 31
Created filesystem with 13/27648 inodes and 3568/110592 blocks
Writing cache... Wrote 30318691 blocks, expected to write 110592 blocks
Done
Creating filesystem with parameters:
Size: 117332488192
Block size: 4096
Blocks per group: 32768
Inodes per group: 8192
Inode size: 256
Journal blocks: 32768
Label:
Blocks: 28645627
Block groups: 875
Reserved block group size: 1024
Created filesystem with 11/7168000 inodes and 498001/28645627 blocks
Writing userdata... Unknown chunk type 0x0000 at 0x00E160C4
Wrote 50414212 blocks, expected to write 28645627 blocks
Done
Done
[179]Failed to Switch (return code: 1, CMD Error: Timeout) !!!
