topic started.
china brand HOTMAX R30. MTK6580.
flash error:
Boot version: 1.05, FW version: 1.13 (Aug 19 2019 23:46:09)
Insertion test... Done
Init bus...
VCC: 3.3 V, VCCQ: 3.0 V
Bus: 4 bit (HS SDR 24MHz)
Access mode: sector mode
Power supply: dual-voltage (1.70-1.95V, 2.7-3.6V)
Card/BGA: BGA (Discrete embedded) - High density MMC
Manufacturer ID: 0x90 (SK Hynix)
Product name: H4G1d (0x483447316404), rev: 0x87, serial number: 0x00201201
Manufacturing date: Jan 2014
CID: 90014A48 34473164 04870020 12011150
CSD: D0270132 0F5903FF FFFFFFE7 8A4040E2
EXT_CSD revision: 1.5 (MMC v4.41)
Partition info:
Boot1: 2048 KiB
Boot2: 2048 KiB
RPMB: 2048 KiB
User area: 3.61 GiB(3,875,536,896 bytes)
Re-partitioning... Done
Writing MBR, GPT at 0x00000000-0x000043FF (34 sectors)... Done in 1.002 s
Writing preloader header... Done
Current partition access:
Access to boot partition 1
Writing preloader at 0x00000000 (241 sectors)... Done in 0.055 s
Setting boot partition config to 0x48... Done
Current partition access:
Access to user area
Processing file: "lk.bin"...
Writing lk at 0x01CC0000 (495 sectors)... Failed to write block 0x01CD0000:65536 (return code: 1, CMD Error: Timeout)
cmd response: 0xD00, card status: 0x0, card state: 6 (Card is receiving operation information)
status: unknown (0)
strong text
NAND TEST USER AREA FAILED :
NAND TEST LOG :
VCC: 3.3 V, VCCQ: 3.0 V
Bus: 1 bit (HS SDR 24MHz)
Access mode: sector mode
Power supply: dual-voltage (1.70-1.95V, 2.7-3.6V)
Card/BGA: BGA (Discrete embedded) - High density MMC
Manufacturer ID: 0x90 (SK Hynix)
Product name: H4G1d (0x483447316404), rev: 0x87, serial number: 0x00201201
Manufacturing date: Jan 2014
CID: 90014A48 34473164 04870020 12011150
CSD: D0270132 0F5903FF FFFFFFE7 8A4040E2
EXT_CSD revision: 1.5 (MMC v4.41)
Partition info:
Boot1: 2048 KiB
Boot2: 2048 KiB
RPMB: 2048 KiB
User area: 3.61 GiB(3,875,536,896 bytes)
Current partition access:
Access to boot partition 1
Writing random bytes to boot1, sector: 0... Done in 0.190 s
Verifying... Done in 0.002 s, content verified successfully.
Writing random bytes to boot1, sector: 3926... Done in 0.003 s
Verifying... Done in 0.001 s, content verified successfully.
Current partition access:
Access to user area
Writing random bytes to userarea, sector: 0... Done in 0.001 s
Verifying... Failed to read block for verify 0x00000000:1024 for verify (return code: 1, CMD Error: Timeout)
cmd response: 0xD00, card status: 0x0, card state: 6 (Card is receiving operation information)
status: unknown (0)
--- Make sure the connection between BOX and eMMC stable ---
Failed to read block 0xCC620000:1024 (return code: 1, CMD Error: Timeout)
cmd response: 0xD00, card status: 0x0, card state: 6 (Card is receiving operation information)
status: unknown (0)
--- Make sure the connection between BOX and eMMC stable ---
--- please try again (you may RESUME the read process) ---
NAND storage "userarea" partition test failed!
pls reply Master.
with regards,
