i want to learn until my death. so i want to learn to be continue ...........
hello Master very complected situation. phone is RedMi but don't know the phone model cause phone is full dead. battery model is BN37. according to battery model may be phone is mi 6 or 6a. may be. not confirmed.
i find problem is EMMC. emmc no- Skhynix H9TQ17ABJTCC.
UFI indentify log -
Init bus...
VCC: 3.3 V, VCCQ: 3.0 V
Bus: 1 bit (SDR 24MHz)
Access mode: sector mode
Power supply: dual-voltage (1.70-1.95V, 2.7-3.6V)
Card/BGA: BGA (Discrete embedded) - High density MMC
Manufacturer ID: 0x90 (SK Hynix)
Product name: HAG4a2 (0x484147346132), rev: 0xA5, serial number: 0x4AC8BE34
Manufacturing date: Feb 2019
CID: 90014A48 41473461 32A54AC8 BE342624
CSD: D0270132 8F5903FF FFFFFFE7 8A400016
EXT_CSD revision: 1.8 (MMC v5.1)
Partition info:
Boot1: 4 MiB
Boot2: 4 MiB
RPMB: 4 MiB [Provisioned, counter: 27059]
User area: 14.68 GiB(15,758,000,128 bytes)
Cache size: 1 MiB
Hardware reset function: 1
Partition configuration: 0x00
No boot acknowledge is sent (default)
Device is not boot-enabled (default)
Partitioning support: 0x07
Device support partitioning feature
Device can have enhanced technological features
Device partitioning possible
Boot configuration protection: 0x00
Boot bus conditions: 0x00
Boot area write protection: 0x00
Selected: [HYNIX] H9TQ17ADFTACUR/16GB+LPDDR3 24Gb (BGA221)
NAND TEST report is ok
Init bus...
VCC: 3.3 V, VCCQ: 3.0 V
Bus: 1 bit (SDR 24MHz)
Access mode: sector mode
Power supply: dual-voltage (1.70-1.95V, 2.7-3.6V)
Card/BGA: BGA (Discrete embedded) - High density MMC
Manufacturer ID: 0x90 (SK Hynix)
Product name: HAG4a2 (0x484147346132), rev: 0xA5, serial number: 0x4AC8BE34
Manufacturing date: Feb 2019
CID: 90014A48 41473461 32A54AC8 BE342624
CSD: D0270132 8F5903FF FFFFFFE7 8A400016
EXT_CSD revision: 1.8 (MMC v5.1)
Partition info:
Boot1: 4 MiB
Boot2: 4 MiB
RPMB: 4 MiB [Provisioned, counter: 27059]
User area: 14.68 GiB(15,758,000,128 bytes)
Current partition access:
Access to boot partition 1
Writing random bytes to boot1, sector: 0... Done in 0.090 s
Verifying... Done in 0.001 s, content verified successfully.
Writing random bytes to boot1, sector: 3134... Done in 0.002 s
Verifying... Done in 0.000 s, content verified successfully.
Current partition access:
Access to user area
Writing random bytes to userarea, sector: 0... Done in 0.002 s
Verifying... Done in 0.001 s, content verified successfully.
Writing random bytes to userarea, sector: 25595844... Done in 0.001 s
Verifying... Done in 0.001 s, content verified successfully.
Health Report is ok
Insertion test... Done
Init bus...
VCC: 3.3 V, VCCQ: 3.0 V
Bus: 1 bit (SDR 24MHz)
Access mode: sector mode
Power supply: dual-voltage (1.70-1.95V, 2.7-3.6V)
Card/BGA: BGA (Discrete embedded) - High density MMC
Manufacturer ID: 0x90 (SK Hynix)
Product name: HAG4a2 (0x484147346132), rev: 0xA5, serial number: 0x4AC8BE34
Manufacturing date: Feb 2019
CID: 90014A48 41473461 32A54AC8 BE342624
CSD: D0270132 8F5903FF FFFFFFE7 8A400016
EXT_CSD revision: 1.8 (MMC v5.1)
Partition info:
Boot1: 4 MiB
Boot2: 4 MiB
RPMB: 4 MiB [Provisioned, counter: 27059]
User area: 14.68 GiB(15,758,000,128 bytes)
eMMC 5.x Health report:
Device lifetime: Normal
Estimation of the device lifetime (SLC): 0% - 10% device life time used
Estimation of the device lifetime (MLC): 0% - 10% device life time used
so, Master i submit all report. want to proceed next step for REVIVE the phone .
please step by step, please help me. please reply.
with regards,
Sadman
