I cant connect phone by ufs pinout

Mahmud_1234

Hello Ufi team.
I soldered all pins corectly but couldn't connect it by ufs pinout and its not my first that coudn't connect.
I have never success connecting not once.Pls do change or make something,it connects successfuly.
I bought it for 300$.But no 1 phone i fixed.

madgoeslim

Mahmud_1234 Hi,
How about using chip off methode?

This is UFI UFS ISP chart connection for you to try :

Heres the tips for you to try :

Apart from Samsung, for the mandatory category, the RST pin can be ignored as long as it uses a voltage power from USB connections
The jumper cable connection length is 4-6cm for best connection.
You may change the Power Mode, from Auto to PWM mode,

AbdallahHassan

Mahmud_1234 remoe transistor 12 pins that installed on isp adapter then install resistor 47 ohm between gnd and tx-n

Saadikram

you need a trainer

Mahmud_1234

madgoeslim Thank you very much sir i will try.I have a235f to try.It needs to make factory reset.It doesn't take any firmware and factory reset line is removed in recovery.

Mahmud_1234

AbdallahHassan I will try thank you

madgoeslim

Thanks for sharing with us brother 🙏

majidgee

madgoeslim i have new ufi box rejistration error [INTERNET] Network Error: The unknown error was occured: 0

madgoeslim

majidgee Hello,
Sorry for the inconvenience.
Our servers are blocked by DMCA because they have been infiltrated by illegal torrent trackers.
This is the second time we have experienced this.
So, there are several online services that have an impact and cannot be used for a while,
such as download support, upgrade box fw, refill card, file synchronization, and activation services.

We are working to move our server service and fix the problem ASAP 🙏
We will make an official announcement when servers are back and running normally.