sir my mobile vivo y11 health 90% issue emmc samsung
then update emmc ffu health is ok
i write full dump butt not power on my mobile ..
what wrong with my device.
this is info
Connection status: XHCI:HUB3[#8]:USB 2.00 High-Speed
Interface: UFI High-Speed
Serial number: 0011-8840-9136
Boot version: 1.04, FW version: 1.15 (Nov 8 2022 18:51:23)
Insertion test... Done
Init bus...
VCC: 3.3 V, VCCQ: 3.0 V
Bus: 8 bit (HS SDR 24MHz)
Access mode: sector mode
Power supply: dual-voltage (1.70-1.95V, 2.7-3.6V)
Card/BGA: BGA (Discrete embedded) - High density MMC
Manufacturer ID: 0x15 (Samsung)
Product name: GD6BMB (0x474436424d42), rev: 0x08, serial number: 0x4B98656B
Manufacturing date: Aug 2019
CID: 15010047 4436424D 42084B98 656B864C
CSD: D0270132 0F5903FF F6DBFFEF 8E40400C
Firmware version: 0x08
EXT_CSD revision: 1.8 (MMC v5.1)
Partition info:
Boot1: 4 MiB
Boot2: 4 MiB
RPMB: 4 MiB [Provisioned, counter: 2384]
User area: 29.12 GiB(31,268,536,320 bytes)
Cache size: 64 MiB
Hardware reset function: 1
Secure Write Protect Information: 0x01
Secure Feature support: 0x55
Partition configuration: 0x38
No boot acknowledge is sent (default)
User area is enabled for boot
Partitioning support: 0x07
Device support partitioning feature
Device can have enhanced technological features
Device partitioning possible
Boot configuration protection: 0x00
Boot bus conditions: 0x00
Boot area write protection: 0x00
platform: msm8937, cpu abi: arm64-v8a
manufacturer: vivo
board: QC_Reference_Phone, name: msm8937_64
brand: vivo, model: vivo 1906
build id: PKQ1.190616.001, version: 9 [Pie] (PKQ1.190616.001 release-keys)
build description: msm8937_64-user 9 PKQ1.190616.001 compiler09232225 release-keys
Internal storage: 23.07 GiB
crypto state: unencrypted
eMMC selected: [SAMSUNG] KMGD6001BM-B421/32GB (BGA221)
