UFI Software version 1.8.0.3296 is Out

Shahjee

Connection status: XHCI:HUB3[#3]:USB 2.00 High-Speed
Interface: UFI High-Speed
Serial number: 0011-8839-6970
Boot version: 1.04, FW version: 1.15 (Nov 8 2022 18:51:23)
Insertion test... Done
Init bus...
VCC: 3.3 V, VCCQ: 3.0 V
Bus: 1 bit (SDR 3MHz)
Access mode: sector mode
Power supply: dual-voltage (1.70-1.95V, 2.7-3.6V)
Card/BGA: BGA (Discrete embedded) - High density MMC
Manufacturer ID: 0x15 (Samsung)
Product name: DP6DAB (0x445036444142), rev: 0x02, serial number: 0x7FDFCA78
Manufacturing date: May 2021
CID: 15010044 50364441 42027FDF CA785840
CSD: D0270132 0F5903FF F6DBFFEF 8E40400C
Firmware version: 0x04
EXT_CSD revision: 1.8 (MMC v5.1)
Partition info:
Boot1: 4 MiB
Boot2: 4 MiB
RPMB: 16 MiB
User area: 58.24 GiB(62,537,072,640 bytes)

[moviNAND] eMMC Full Reset...
Reading device informations...
error: read firmware failed

madgoeslim

Shahjee Hi, try to read the eMMC fw, and update emmc fw manually and post the result here.

denbagus_gowok Will try to get the same device, and make some test regarding your problem.

oriont13 Hi,
It says error custom loader init failed,
please reconnect the usb cable and battery everytime you face the same error, and try do the operation again.

B.R

denbagus_gowok

bug found on writing rpmb vivo devices
all function is ok no problem
test on vivo pd1732cf
tengkiu mas i'm always ufi lovers

oriont13

please fix the port connection problem, when i don't use the bypass security feature. because the bypass feature only works when there is 1 credit. i use another bypass security tool.
or teach me how to use it to work properly
here

chimot88

😄

oriont13

madgoeslim Thank you, I have purchased credit. and everything is going well.

MirajKhan

madgoeslim
hello sir
Connection status: XHCI:HUB3[#1]:USB 2.00 High-Speed
Interface: UFI High-Speed
Serial number: 0011-8840-8004
Boot version: 1.04, FW version: 1.15 (Nov 8 2022 18:51:23)
Insertion test... Done
Init bus...
VCC: 3.3 V, VCCQ: 1.8 V
Bus: 1 bit (SDR 6MHz)
Access mode: sector mode
Power supply: dual-voltage (1.70-1.95V, 2.7-3.6V)
Card/BGA: BGA (Discrete embedded) - High density MMC
Manufacturer ID: 0x15 (Samsung)
Product name: DP6DAB (0x445036444142), rev: 0x02, serial number: 0x0663CE0B
Manufacturing date: Jul 2021
CID: 15010044 50364441 42020663 CE0B78CE
CSD: D0270132 0F5903FF F6DBFFEF 8E40400C
Firmware version: 0x04
EXT_CSD revision: 1.8 (MMC v5.1)
Partition info:
Boot1: 4 MiB
Boot2: 4 MiB
RPMB: 16 MiB
User area: 58.24 GiB(62,537,072,640 bytes)

moviNAND dump firmware...
Reading device informations...
error: read firmware failed

greatelias

oriont13 ensure you have at least 1 credit. It will work perfectly.

oriont13

greatelias Thank you, I already know as I said above

greatelias

oriont13 ok glad to hear

SamsungJedelapan

i have synchronize file but there is no update? how come?? am still using 3246 version

ernophones

pls sir dose ufi ufs supports ufs 3.0 above for direct isp

Princex

i like it very nice UFI ♥

masfer

my UFI app is not opening after double clicking. Antivirus is off. There was no problem in installation, i think. Any solution guys?

AhmadNurKabib

Lapor pak,
Untuk Fitur UFI AndroidTool-BOX eMMC task
eMMC provisioning eror, Stuck di Provisioning RPMB Key
sudah coba di beberapa emmc sama . eMMC status clean rpmb
Fitur ini di butuhkan untuk mengatasi tulisan Test Device Limited merah di vivo mediatek
Terimakasih @madgoeslim

AchmadMisbakhulmunir

AhmadNurKabib guru apakah sudah fix set prov rpmb via androit utility

mohan094

madgoeslim Sir which operating system would you suggest for our work. So that we get good results.
And also tell if the firmware of the box should be updated all the time?

Msibashankar

UFI ANDROID TOOL BRAND & MODEL LIST FIX BY SSM
https://www.youtube.com/watch?v=Mg6ODTohXuw
[https://www.youtube.com/watch?v=Mg6ODTohXuw](https://)

oriont13

@"madgoeslim"
found a bug for read write operation of rpmb partition.next bug i never succeed this operation on any phone model with emmc 254.
thanks

ebysgsm

thank u sir

DUTTAADGAMER

same error code 0xc0000141 after windows update to 24h2 please fix

AchmadMisbakhulmunir

DUTTAADGAMER same problem at w11 24h2 my pc work best ,, i dont know and now i just dual boot to get all

SAHRAIN

I CANNOT IDENTIFY OPPO A11K BOOT