Interface: UFI High-Speed
Serial number: 0011-8846-0100
Boot version: 1.05, FW version: 1.15 (Nov 8 2022 18:51:23)
Insertion test... Done
Init bus...
VCC: 3.3 V, VCCQ: 3.0 V
Bus: 8 bit (HS SDR 24MHz)
Access mode: sector mode
Power supply: dual-voltage (1.70-1.95V, 2.7-3.6V)
Card/BGA: BGA (Discrete embedded) - MMC
Manufacturer ID: 0x90 (SK Hynix)
Product name: H8G4t (0x483847347421), rev: 0x01, serial number: 0x030150F2
Manufacturing date: مايو 2016
CID: 90014A48 38473474 21010301 50F25310
CSD: D07F0132 0F5903FF FFFFFFEF 8A400012
Device version: 0x3805
Firmware version: 0x34303053
EXT_CSD revision: 1.7 (MMC v5.0, v5.01)
Partition info:
Boot1: 4 MiB
Boot2: 4 MiB
RPMB: 4 MiB [Authentication Key not yet programmed]
User area: 7.28 GiB(7,818,182,656 bytes)
Loading file: "\C:\Users\ABDO\Desktop\531%20h\ext_csd.bin", size: 512 bytes...
Writing extcsd, 512 bytes... Failed to switch[16][0,16,0] (return code: 1, CMD Error: Timeout) !!!
Failed to switch[64][0,64,3] (return code: 4, CMD Error: Invalid response) !!!
Failed to switch[65][0,65,34] (return code: 1, CMD Error: Timeout) !!!
Failed to switch[66][0,66,2] (return code: 4, CMD Error: Invalid response) !!!
Failed to switch[155][0,155,0] (return code: 1, CMD Error: Timeout) !!!
Failed to switch[187][0,187,0] (return code: 4, CMD Error: Invalid response) !!!
Done
New EXT CSD info:
EXT_CSD revision: 1.7 (MMC v5.0, v5.01)
Partition info:
Boot1: 4 MiB
Boot2: 4 MiB
RPMB: 4 MiB [Authentication Key not yet programmed]
User area: 7.28 GiB(7,818,182,656 bytes)
Cache size: 1 MiB
Secure Write Protect Information: 0x00
Secure Feature support: 0x55
Partition configuration: 0x08
Partitioning support: 0x07
Boot configuration protection: 0x00
Boot bus conditions: 0x00
Boot area write protection: 0x10
User area write protection: 0x10
##i try a lot of the emmc all i have and it the same problem s