Hello sir.
Lately I've been trying to use Ufi Box, I always get errors with the readings.
I'm using short cables, good thickness, USB power, and I still have an error when I try to read partitions even if they are small.
Previously ufi had formidable stability in its readings, today it is quite the opposite.
I am currently trying to make a backup of a Samsung A055M and I have been trying for hours and I am not making any progress because of it.
Likewise, the interface has become slower with each update they release, it is difficult to cancel processes when they get stuck and it is necessary to disconnect and reconnect.
I'll leave a log so you can review.
`Connection status: XHCI:HUB3[#2]:USB 2.00 High-Speed
Interface: UFI High-Speed
Serial number: 0011-8841-4173
Boot version: 1.05, FW version: 1.15 (Nov 8 2022 18:51:23)
Insertion test... Done
Init bus...
VCC: 3.3 V, VCCQ: 1.8 V
Bus: 1 bit (SDR 4MHz)
Access mode: sector mode
Power supply: dual-voltage (1.70-1.95V, 2.7-3.6V)
Card/BGA: BGA (Discrete embedded) - High density MMC
Manufacturer ID: 0x15 (Samsung)
Product name: DC6DMB (0x444336444d42), rev: 0x00, serial number: 0xF7D00798
Manufacturing date: oct. 2023
CID: 15010044 4336444D 4200F7D0 0798AAB8
CSD: D0270132 0F5903FF F6DBFFEF 8E40400C
Firmware version: 0x02
EXT_CSD revision: 1.8 (MMC v5.1)
Partition info:
Boot1: 4 MiB
Boot2: 4 MiB
RPMB: 16 MiB [Provisioned, counter: 12928]
User area: 58.24 GiB(62,537,072,640 bytes)
Cache size: 64 MiB
Hardware reset function: 1
Secure Write Protect Information: 0x01
Secure Feature support: 0x55
Partition configuration: 0x00
No boot acknowledge is sent (default)
Device is not boot-enabled (default)
Partitioning support: 0x07
Device support partitioning feature
Device can have enhanced technological features
Device partitioning possible
Boot configuration protection: 0x00
Boot bus conditions: 0x02
Bus width: x8 (sdr/ddr), boot mode: sdr(default), reset bus width to x1 sdr(default)
Boot area write protection: 0x00
platform: MT6768, cpu abi: arm64-v8a
manufacturer: samsung
board: a05m, name: a05mub
brand: samsung, model: SM-A055M
build id: UP1A.231005.007, version: 14 [Android 14(Upside Down Cake)] (UP1A.231005.007.A055MUBS3BXD2)
build date: Fri Apr 5 04:00:51 KST 2024, security patch: 2024-04-01
build description: a05mub-user 14 UP1A.231005.007 A055MUBS3BXD2 release-keys
userdata fs: unknown(encrypted?)
eMMC selected: [SAMSUNG] KMDC6001DM-BXXX/64GB
`
Error
`
Connection status: XHCI:HUB3[#2]:USB 2.00 High-Speed
Interface: UFI High-Speed
Serial number: 0011-8841-4173
Boot version: 1.05, FW version: 1.15 (Nov 8 2022 18:51:23)
Insertion test... Done
Init bus...
VCC: 3.3 V, VCCQ: 1.8 V
Bus: 1 bit (SDR 4MHz)
Access mode: sector mode
Power supply: dual-voltage (1.70-1.95V, 2.7-3.6V)
Card/BGA: BGA (Discrete embedded) - High density MMC
Manufacturer ID: 0x15 (Samsung)
Product name: DC6DMB (0x444336444d42), rev: 0x00, serial number: 0xF7D00798
Manufacturing date: oct. 2023
CID: 15010044 4336444D 4200F7D0 0798AAB8
CSD: D0270132 0F5903FF F6DBFFEF 8E40400C
Firmware version: 0x02
EXT_CSD revision: 1.8 (MMC v5.1)
Partition info:
Boot1: 4 MiB
Boot2: 4 MiB
RPMB: 16 MiB
User area: 58.24 GiB(62,537,072,640 bytes)
Reading tzar at 0x05D00000-0x060FFFFF size: 4 MiB... Failed to read block 0x05E10000:65536 (return code: 0, CMD Error: )
cmd response: 0x0, card status: 0x0, card state: 0 (Card is in unknown state)
OS error code: 0x000003E5(Se está ejecutando la operación de E/S superpuesta)
--- Make sure the connection between the BOX and eMMC stable ---
--- please try again (you may RESUME the read process) ---
`
Please UFI team.
Users have felt that the tool will no longer have improvements or updates, even the support area does not allow anything to be downloaded.
Will the tool still have support?
greetings
