coolpad 8297 erro 11 % at ygdp

mobileguru

1st set coolpad i flash with boot file and boot 1 boot 2 etc flash ok but set not power on pc show qualcomm port.. today i try with other set flash with files with factory image flash ok but set goes in qualcomm mode... help me .. sorry for bad english

here is log
Connection status: EHCI:HUB:HUB:USB 2.00 High-Speed
Interface: UFI High-Speed

Boot version: 1.04, FW version: 1.10 (Mar 26 2017 14:24:34)
Insertion test... Done.
Init bus...
VCC: 3.3 V, VCCQ: 1.8 V
Bus: 1 bit (SDR 4MHz)
Access mode: sector mode
Power supply: dual-voltage (1.70-1.95V, 2.7-3.6V)
Card/BGA: BGA (Discrete embedded) - High density MMC
Manufacturer ID: 0x90 (SK Hynix)
Product name: H8G1e (0x483847316505), rev: 0x07, serial number: 0xEAA2606B
Manufacturing date: May 2015
CID: 90014A48 38473165 0507EAA2 606B524A
CSD: D0270132 0F5903FF FFFFFFEF 8A4040D2
EXT_CSD revision: 1.7 (MMC v5.0, v5.01)
Partition info:
Boot1: 4096 KiB
Boot2: 4096 KiB
RPMB: 4096 KiB
User area: 7.28 GiB(7,818,182,656 bytes)
Cache size: 1 MiB
Partition configuration: 0x78
Boot acknowledge is sent during the boot operation
User area is enabled for boot
Partitioning support: 0x07
Device support partitioning feature
Device can have enhanced technological features
Device partitioning possible
Boot configuration protection: 0x00
Boot bus conditions: 0x00
Boot area write protection: 0x00
Power-on write protection: possible
Permanent write protection: possible
Lock status: not locked
User area write protection: 0x50
Password protection features: enabled
Power-on write protection: possible
Permanent write protection: not possible
Lock status: not locked
e·MMC 5.x HEALTH report:
Device lifetime: Urgent (Consumed 90% of the reserved block)
Estimation of the device lifetime (SLC): 0% - 10% device life time used
Estimation of the device lifetime (MLC): Exceeded its maximum estimated device life time
Selected: [HYNIX] eNAND H9TQ64A8GTMCUR-KUM/8GB+LPDDR3 8Gb (BGA221)

madgoeslim

mobileguru Device lifetime: Urgent (Consumed 90% of the reserved block)
Estimation of the device lifetime (SLC): 0% - 10% device life time used
Estimation of the device lifetime (MLC): Exceeded its maximum estimated device life time
Selected: [HYNIX] eNAND H9TQ64A8GTMCUR-KUM/8GB+LPDDR3 8Gb (BGA221)

Means your emmc is about to die, then replace with new emmc to unbrick your devices.

mobileguru

Boot2: 4096 KiB
RPMB: 4096 KiB
User area: 7.28 GiB(7,818,182,656 bytes)
Cache size: 1 MiB
Partition configuration: 0x48
Boot acknowledge is sent during the boot operation
Boot partition 1 is enabled for boot
Partitioning support: 0x07
Device support partitioning feature
Device can have enhanced technological features
Device partitioning completed
Boot configuration protection: 0x00
Boot bus conditions: 0x00
Boot area write protection: 0x00
Power-on write protection: possible
Permanent write protection: possible
Lock status: not locked
User area write protection: 0x50
Password protection features: enabled
Power-on write protection: possible
Permanent write protection: not possible
Lock status: not locked

ANDROID ROM info:
platform: msm8916, cpu abi: armeabi-v7a
manufacturer: YuLong
board: msm8916, name: Coolpad8297L-I00
brand: Coolpad, model: Coolpad 8297L-I00
build id: KTU84P, version: 4.4.4 KitKat (4.4.150.00.T1.150528.KTU84P)
build description: 1501731

Selected: [HYNIX] eNAND H9TP64A8JDMCPR-KGM/8GB (FBGA162) now show this after write file

mobileguru

phone was ok before

madgoeslim

I read log from your first log. Thats why I suggest to replace. All phones are ok before needs to be repair.

HossainMurad

Connection status: XHCI:HUB3:USB 2.00 High-Speed
Interface: UFI High-Speed
Serial number: 0011-8841-1937
Boot version: 1.04, FW version: 1.12 (Jun 7 2018 00:06:47)
Insertion test... Done.
Init bus...
VCC: 3.3 V, VCCQ: 3.0 V
Bus: 1 bit (SDR 52MHz)
Access mode: sector mode
Power supply: dual-voltage (1.70-1.95V, 2.7-3.6V)
Card/BGA: BGA (Discrete embedded) - High density MMC
Manufacturer ID: 0x90 (SK Hynix)
Product name: H4G1d (0x483447316404), rev: 0x86, serial number: 0x02A3EBB6
Manufacturing date: Jul 2014
CID: 90014A48 34473164 048602A3 EBB6712E
CSD: D0270132 0F5903FF FFFFFFE7 8A4040E2
EXT_CSD revision: 1.5 (MMC v4.41)
Partition info:
Boot1: 2048 KiB
Boot2: 2048 KiB
RPMB: 2048 KiB
User area: 3.61 GiB(3,875,536,896 bytes)
Hardware reset function: 1
Partition configuration: 0x08
No boot acknowledge is sent (default)
Boot partition 1 is enabled for boot
Partitioning support: 0x03
Device support partitioning feature
Device can have enhanced technological features
Device partitioning completed
Boot configuration protection: 0x00
Boot bus conditions: 0x00
Boot area write protection: 0x00
Power-on write protection: possible
Permanent write protection: possible
Lock status: not locked
User area write protection: 0x50
Password protection features: enabled
Power-on write protection: possible
Permanent write protection: not possible
Lock status: not locked
Selected: [HYNIX] eNAND H9TP32A8JDACPR-KGM/4GB (BGA162)

madgoeslim

HossainMurad Hello,
Wht is your problem?
You can make a new post regarding to your problem by click at Start a Discussion.

HossainMurad

Insertion test... Done.
Init bus...
VCC: 3.3 V, VCCQ: 3.0 V
Bus: 1 bit (SDR 24MHz)
Access mode: sector mode
Power supply: dual-voltage (1.70-1.95V, 2.7-3.6V)
Card/BGA: BGA (Discrete embedded) - High density MMC
Manufacturer ID: 0x90 (SK Hynix)
Product name: H4G1d (0x483447316404), rev: 0x86, serial number: 0x00A3A5E6
Manufacturing date: Feb 2014
CID: 90014A48 34473164 048600A3 A5E6216A
CSD: D0270132 0F5903FF FFFFFFE7 8A4040E2
EXT_CSD revision: 1.5 (MMC v4.41)
Partition info:
Boot1: 2048 KiB
Boot2: 2048 KiB
RPMB: 2048 KiB
User area: 3.61 GiB(3,875,536,896 bytes)

Current partition access:
Access to boot partition 1
Loading file: "\%BACKUPS%\Other\H4G1d_00A3A5E6\boot1.bin", size: 2 MiB...
Writing boot1 (4096 sectors)... Done in 1.100 s
Current partition access:
Access to boot partition 2
Loading file: "\%BACKUPS%\Other\H4G1d_00A3A5E6\boot2.bin", size: 2 MiB...
Writing boot2 (4096 sectors)... Done in 1.103 s
Current partition access:
Access to user area
Loading file: "\%BACKUPS%\Other\H4G1d_00A3A5E6\userarea_512MiB.bin", size: 512 MiB...
Writing userarea (1048576 sectors)... Failed to write block 0x00010000:65536 (return code: 1, CMD Error: Timeout)
cmd response: 0xD00, card status: 0x0, card state: 6 (Card is receiving operation information)
status: unknown (0)

madgoeslim

HossainMurad Hello, please do nand test, and post the result here.