eMMC Socket error... Please help how to solve!
Connection status: EHCI:HUB:USB 2.00 High-speed
Interface: UFI High-Speed
Serial number: 0011-8079-2607
Boot version: 1.03, FW version: 1.10 (Mar 26 2017 14:24:34)
Insertion test...
Error: VCC overcurrent detected !!!
Aborted
but using ISP direct no problem.
Connection status: EHCI:HUB:USB 2.00 High-speed
Interface: UFI High-Speed
Serial number: 0011-8079-2607
Boot version: 1.03, FW version: 1.10 (Mar 26 2017 14:24:34)
Insertion test... Done.
Init bus...
VCC: 3.3 V, VCCQ: 1.8 V
Bus: 1 bit (SDR 4MHz)
Access mode: sector mode
Power supply: dual-voltage (1.70-1.95V, 2.7-3.6V)
Card/BGA: BGA (Discrete embedded) - High density MMC
Manufacturer ID: 0x15 (Samsung)
Product name: RNW00M (0x524e5730304d), rev: 0x0B, serial number: 0x23B6F264
Manufacturing date: Jun 2015
CID: 15010052 4E573030 4D0B23B6 F26462C6
CSD: D0270132 0F5903FF F6DBFFEF 8E40400C
EXT_CSD revision: 1.7 (MMC v5.0, v5.01)
Partition info:
Boot1: 4096 KiB
Boot2: 4096 KiB
RPMB: 512 KiB
User area: 7.28 GiB(7,818,182,656 bytes)
Cache size: 64 MiB
Hardware reset function: 1
Partition configuration: 0x00
No boot acknowledge is sent (default)
Device is not boot-enabled (default)
Partitioning support: 0x07
Device support partitioning feature
Device can have enhanced technological features
Device partitioning possible
Boot configuration protection: 0x00
Boot bus conditions: 0x00
Boot area write protection: 0x00
Power-on write protection: possible
Permanent write protection: possible
Lock status: not locked
ANDROID ROM info:
platform: msm8916, cpu abi: arm64-v8a
manufacturer: Sony
board: msm8916, name: MSM8916_for_arm64
brand: Sony, model: E2353
build id: 26.3.A.1.33, version: 6.0.1 Marshmallow (26.3.A.1.33)
build description: tulip_ss-user 6.0.1 1.0.J.0.0 174 test-keys
