Xiaomi Redmi note 4 (Mido) eMMC Replacement Methode

Marcos

Please some body have full dump for redmi note 4 mido QC8953

madgoeslim

Marcos You don't need dump files for this device. Just put empty emcp, then flash the rest using UFI Android Toolbox. Check the Tutorial section for more detail instruction.

Marcos

madgoeslim my mi account can't detec usb power on if qcloader ande fastboot work fine
i search in google in the sistem file build.prop no found command line

persist.service.adb.enable=1

persist.service.debuggable=1

persist.sys.usb.config=mtp,adb

in file dump repair this

yoxx69

madgoeslim assalamualaikum bang..sy sdh coba memakai file mido tanpa senggol cpu..hasilnya msh ttp bengong..apa ada trik yg kelewat..mohon pencerahannya..

DostonbekJumaboyev

madgoeslim hi bro

YohanQuantumphonesvc

i tested redmi note 4 qcm mido no need dump .... put empty kmr31 or kmrx1 then flash with mi flash or ufi via 9008 mode .... if failed or not connect check driver and change usb cable

Marcos

YohanQuantumphonesvc you have link to download please

YohanQuantumphonesvc

this is the latest fastboot/edl firmware http://en.miui.com/a-234.html

try the lower as you can get search at google

Marcos

Hello, realy my unique opition is full emmc dump to repair this phone i try all solution but not work please some body up full emmc dump redmi note 4 4GB ram 64GB Qualcomm MSM8953 Snapdragon 625

Dilip_is

Hello Sir

Is true?

In Mi Note 4 (Mido) note possible to change only emmc,. We have to change cpu as well from same handset..

Newmobile

hello sir
mi note 4 only blink red lite any solution

sterk

Is it possible to provide software Pre-custom firmware Redmi Note 4X (mido) for new emmc replacement

KamalMohamed

hi any one help me redmi note 4 emmc file

madgoeslim

Hello Ufixers,
I'll guide you how to replace emmc for Xiaomi Redmi note 4/4x qualcomm.
Please follow this guide carefully :
1. Prepare new emmc, just do nand test and factory erase after Identify emmc
2. Resolder emmc to board, plug usb, and device will stuck in emergency mode(9008)
3. Open Ufi Android ToolBox
4. In Qualcomm tab, please select Brand, model according to your device
5. This is Important step : Load developer china rom, uncheck Restart after flash
After finish flashing, Do Not Restart or Reconnect the USB.
Do Identify Device Again,
Go to Special Task, Dissable DM verity and force encrypt with Sig Overflow
After this, you can reboot the device.
6. If you want to flash global rom, make sure you have unlock the bootloader at first, otherwise you will get wifi problem.

Good Luck
B.R
madgoeslim

Quetzaltzin

madgoeslim Hi sr, how can i send a inbox to you?

lpblackmesa

madgoeslim
Hello madgoeslim.
I did everything that you wrote, loaded developer rom (mido_images_7.4.6_20170406.0000.00_6.0_cn) , unchecked (Restart after flash) and did (Disable DM verity and force encrypt with Sig Overflow) after flashing without reconnecting.
But, after all, phone just tried to start, showed Mi logo for a second and falling into 900E port...
What I did wrong? Which version of FW did you use?
Colleagues, who have some positive results?

madgoeslim

madgoeslim
5. This is Important step :
- 1) Load developer china rom,
- 2) uncheck Restart after flash
- 3) After finish flashing, Do Not Restart or Reconnect the USB.
- 4) Do Identify Device Again,
- 5) Go to Special Task, Dissable DM verity and force encrypt with Sig Overflow
After this, you can reboot the device.
6. If you want to flash global rom, make sure you have unlock the bootloader at first, otherwise you will get wifi problem.

Please pay attention to above step, follow it carefully.

MAJNU_SEARCH_JULIET

lpblackmesa Plz upload logs.

lpblackmesa

First connection with clear flash

Flashing

After flashing pressed Identify button
patching boot

So, in the end, phone didn't load, just blinking Mi logo and falling into 900E port...

madgoeslim

Ok, will upload the rom that works for me tomorrow. Include screenshot, and the link.

IvanRose

its so simple, use new emcp or if u had emcp from mtk cpu, u can use it. flash it with special file, after that mido will go to mi logo and sometimes restart into blue screen. thats all ok, flash it using any global up to 9.6 and finnish.... thats all, btw mas salim wheres u link , wanna try using emcp from qualcom cpu. if its works its amazing. thanks

IvanRose

btw mas salim, u had ffu for KMRX1000BM ?????