Interface: UFI High-Speed
Serial number: 0011-xxxx-6854
Boot version: 1.04, FW version: 1.10 (Mar 26 2017 14:24:34)
Insertion test... Done.
Init bus...
VCC: 2.8 V, VCCQ: 3.0 V
Bus: 1 bit (SDR 24MHz)
Access mode: sector mode
Power supply: dual-voltage (1.70-1.95V, 2.7-3.6V)
Card/BGA: BGA (Discrete embedded) - High density MMC
Manufacturer ID: 0x90 (SK Hynix)
Product name: H4G2b (0x483447326211), rev: 0x01, serial number: 0xE228290C
Manufacturing date: May 2015
CID: 90014A48 34473262 1101E228 290C529A
CSD: D07F0132 0F5903FF FFFFFFEF 8A4040DA
EXT_CSD revision: 1.6 (MMC v4.5, v4.51)
Partition info:
Boot1: 4096 KiB
Boot2: 4096 KiB
RPMB: 4096 KiB
User area: 3.64 GiB(3,909,091,328 bytes)
Current partition access:
Access to boot partition 1
Loading file: "\%BACKUPS%\Samsung\SM-J100H(KTU84P.J100HXXS0API6-4.4.4-KTU84P)[H4G2b]\SM-J100H(KTU84P.J100HXXS0API6-4.4.4-KTU84P)[H4G2b]\boot1.bin", size: 4 MiB...
Writing boot1 (8192 sectors)... Done in 2.145 s
Current partition access:
Access to boot partition 2
Loading file: "\%BACKUPS%\Samsung\SM-J100H(KTU84P.J100HXXS0API6-4.4.4-KTU84P)[H4G2b]\SM-J100H(KTU84P.J100HXXS0API6-4.4.4-KTU84P)[H4G2b]\boot2.bin", size: 4 MiB...
Writing boot2 (8192 sectors)... Done in 2.164 s
Current partition access:
Access to replay-protected memory block (RPM😎
Loading file: "\%BACKUPS%\Samsung\SM-J100H(KTU84P.J100HXXS0API6-4.4.4-KTU84P)[H4G2b]\SM-J100H(KTU84P.J100HXXS0API6-4.4.4-KTU84P)[H4G2b]\rpmb.bin", size: 4 MiB...
Writing rpmb (8192 sectors)... Done in 1.612 s
Current partition access:
Access to user area
Loading file: "\%BACKUPS%\Samsung\SM-J100H(KTU84P.J100HXXS0API6-4.4.4-KTU84P)[H4G2b]\SM-J100H(KTU84P.J100HXXS0API6-4.4.4-KTU84P)[H4G2b]\userarea_256MiB.bin", size: 256 MiB...
Writing userarea (524288 sectors)... Done in 2 mins 0.214 s
Loading file: "\%BACKUPS%\Samsung\SM-J100H(KTU84P.J100HXXS0API6-4.4.4-KTU84P)[H4G2b]\SM-J100H(KTU84P.J100HXXS0API6-4.4.4-KTU84P)[H4G2b]\ext_csd.bin", size: 512 bytes...
Writing extcsd, 512 bytes... Done.
Failed to initialize eMMC (return code: 6, CMD Error: Invalid Voltage Range) !!!
CMD1 error, cmd response: 0x40FF8080, card state: 255 (Card is in unknown state)
SEND_OP_COND command failed.
Connection status: EHCI:HUB:HUB:USB 2.00 High-Speed
Interface: UFI High-Speed
Serial number: 0011-8839-6854
Boot version: 1.04, FW version: 1.10 (Mar 26 2017 14:24:34)
Insertion test... Done.
VCC, VCCQ not properly connected
Init bus...
VCC: 2.8 V, VCCQ: 3.0 V
Failed to initialize eMMC (return code: 17, CMD Error: Timeout) !!!
CMD1 error, cmd response: 0x0, card state: 255 (Card is in unknown state)
SEND_OP_COND command failed.
--- Check eMMC pins and connection ---
--- Try to select correct VCC/VCCQ manually ---
--- Try to decrease the clock speed ---
Connection status: EHCI:HUB:HUB:USB 2.00 High-Speed
Interface: UFI High-Speed
Serial number: 0011-8839-6854
Boot version: 1.04, FW version: 1.10 (Mar 26 2017 14:24:34)
Insertion test... CMD, DAT0 not properly connected
Init bus...
VCC: 2.8 V, VCCQ: 3.0 V
Bus: 1 bit (HS SDR 52MHz)
Access mode: sector mode
Power supply: dual-voltage (1.70-1.95V, 2.7-3.6V)
Card/BGA: BGA (Discrete embedded) - High density MMC
Manufacturer ID: 0x90 (SK Hynix)
Product name: H4G2b (0x483447326211), rev: 0x01, serial number: 0xE228290C
Manufacturing date: May 2015
CID: 90014A48 34473262 1101E228 290C529A
CSD: D07F0132 0F5903FF FFFFFFEF 8A4040DA
EXT_CSD revision: 1.6 (MMC v4.5, v4.51)
Partition info:
Boot1: 4096 KiB
Boot2: 4096 KiB
RPMB: 4096 KiB
User area: 3.64 GiB(3,909,091,328 bytes)
Cache size: 512 KiB
Partition configuration: 0x08
No boot acknowledge is sent (default)
Boot partition 1 is enabled for boot
Partitioning support: 0x07
Device support partitioning feature
Device can have enhanced technological features
Device partitioning completed
Boot configuration protection: 0x00
Boot bus conditions: 0x00
Boot area write protection: 0x10
Power-on write protection: possible
Permanent write protection: not possible
Lock status: not locked
User area write protection: 0x10
Password protection features: enabled
Power-on write protection: possible
Permanent write protection: not possible
Lock status: not locked
Selected: [HYNIX] eNAND H9TP32A4GDDCPR-KGM/4GB (FBGA162)

useed SM-J100H(KTU84P.J100HXXS0API6-4.4.4-KTU84P)[H4G2b] file in support