emmc frimware upgrade with TP ffu

madgoeslim

Zafarlali Rewrite manual the CID via Write CID button.

Zafarlali

hi ser plz check

manual the CID via Write CID
Connection status: EHCI:HUB:HUB:USB 2.0 High-Speed
Interface: UFI High-Speed
Serial number: 0011-8839-9098
Boot version: 1.04, FW version: 1.11 (Dec 6 2017 17:13:32)
Insertion test... Done.
Init bus...
VCC: 3.3 V, VCCQ: 1.8 V
Bus: 1 bit (SDR 1MHz)
Access mode: sector mode
Power supply: dual-voltage (1.70-1.95V, 2.7-3.6V)
Card/BGA: BGA (Discrete embedded) - High density MMC
Manufacturer ID: 0x15 (Samsung)
Product name: 000000 (0x303030303030), rev: 0x00, serial number: 0x20100212
Manufacturing date: Feb 2010
CID: 15010030 30303030 30002010 021200E6
CSD: D0270132 0F5903FF F6DBFFE7 96404052
EXT_CSD revision: 1.5 (MMC v4.41)
Partition info:
Boot1: 1024 KiB
Boot2: 1024 KiB
RPMB: 1024 KiB
User area: 8 GiB(8,589,934,592 bytes)

moviNAND rewrite CID ... failed !

MirajKhan

madgoeslim not worg

mediatek

try to use UFI .371 for testpoint......

MattHanifOnexox

Zafarlali where uget ffu file

Pawan

Connection status: AMDHUB30:USB 2.0 High-Speed
Interface: UFI High-Speed
Serial number: 0011-8840-5318
Boot version: 1.04, FW version: 1.12 (Jun 7 2018 00:06:47)
Insertion test... Done.
Init bus...
VCC: 3.3 V, VCCQ: 3.0 V
Bus: 1 bit (SDR 52MHz)
Access mode: sector mode
Power supply: dual-voltage (1.70-1.95V, 2.7-3.6V)
Card/BGA: BGA (Discrete embedded) - High density MMC
Manufacturer ID: 0x15 (Samsung)
Product name: FNX2MB (0x464e58324d42), rev: 0x01, serial number: 0xF26EB2CB
Manufacturing date: Jan 2017
CID: 15010046 4E58324D 4201F26E B2CB1472
CSD: D0270132 0F5903FF F6DBFFEF 8E40400C
EXT_CSD revision: 1.8 (MMC v5.1)
Partition info:
Boot1: 4096 KiB
Boot2: 4096 KiB
RPMB: 512 KiB
User area: 7.28 GiB(7,818,182,656 bytes)

eMMC 5.x HEALTH report:
Device lifetime: Normal
Estimation of the device lifetime (SLC): 10% - 20% device life time used
Estimation of the device lifetime (MLC): 10% - 20% device life time used
moviNAND Smart report:
Error Mode: 0x00000000 (Invalid)
Smart report in MMC5x has changed and not supported for this device(use eMMC 5.x

RKVerma

KMQE60013M-B318 NEED FFU FILE

intajkhan

[SAMSUNG] KMQE10013M-B318/16GB+LPDDR3 16Gb (BGA221)
Update emmc fw
file format..... .ffu

If you send please be good

Essential

Connection status: EHCI:HUB:HUB:USB 2.0 High-Speed
Interface: UFI High-Speed
Serial number: 0011-8840-1521
Boot version: 1.04, FW version: 1.12 (Jun 7 2018 00:06:47)
Insertion test... Done.
VCCQ not properly connected
Init bus...
VCC: 3.3 V, VCCQ: 1.8 V
Bus: 1 bit (SDR 4MHz)
Access mode: sector mode
Power supply: dual-voltage (1.70-1.95V, 2.7-3.6V)
Card/BGA: BGA (Discrete embedded) - High density MMC
Manufacturer ID: 0x15 (Samsung)
Product name: GD6BMB (0x474436424d42), rev: 0x01, serial number: 0x2BDDD364
Manufacturing date: Jul 2018
CID: 15010047 4436424D 42012BDD D3647584
CSD: D0270132 0F5903FF F6DBFFEF 8E40400C
EXT_CSD revision: 1.8 (MMC v5.1)
Partition info:
Boot1: 4096 KiB
Boot2: 4096 KiB
RPMB: 4096 KiB
User area: 29.12 GiB(31,268,536,320 bytes)
Cache size: 64 MiB
Hardware reset function: 1
Partition configuration: 0x00
No boot acknowledge is sent (default)
Device is not boot-enabled (default)
Partitioning support: 0x07
Device support partitioning feature
Device can have enhanced technological features
Device partitioning possible
Boot configuration protection: 0x00
Boot bus conditions: 0x00
Boot area write protection: 0x00
Power-on write protection: possible
Permanent write protection: possible
Lock status: not locked
Failed entering Smart report mode (return code: 1, CMD Error: Timeout)
status: Command not legal for the card state
Custom moviNAND command is not supported for this device(MMC51).
Detected: SAMSUNG moviNAND KMGD6000BM-BXXX/32G

Showing this error plz help

Essential

Connection status: EHCI:HUB:HUB:USB 2.00 High-Speed
Interface: UFI High-Speed
Serial number: 0011-8840-1521
Boot version: 1.04, FW version: 1.13 (Aug 19 2019 23:46:09)
Insertion test... Done
Init bus...
VCC: 3.3 V, VCCQ: 3.0 V
Bus: 1 bit (SDR 1MHz)
Access mode: sector mode
Power supply: dual-voltage (1.70-1.95V, 2.7-3.6V)
Card/BGA: BGA (Discrete embedded) - High density MMC
Manufacturer ID: 0x15 (Samsung)
Product name: 000000 (0x303030303030), rev: 0x56, serial number: 0x20160613
Manufacturing date: Jun 2016
CID: 15010030 30303030 30562016 061354D0
CSD: 90270132 0F5903FF F6DB7FE0 8A40403A
EXT_CSD revision: 1.5 (MMC v4.41)
Partition info:
Boot1: 512 KiB
Boot2: 512 KiB
RPMB: 128 KiB
User area: 0 B(2,197,796,421,632 bytes)

moviNAND Field firmware update...
Error: invalid movinand ffu file!
PLZ HELP KMGD6001BM FFU NEEDED............

madgoeslim

Essential KMGD6001BM

Hello, this chip is not supported for ffu operation. So, you have to buy a new one.

LychunIbnuSyabil

madgoeslim
why ufi can't update the emmcfw vga 221

madgoeslim

LychunIbnuSyabil
Please use english in this forum, google translate will help you alot.
FFU for newest chip, mostly bga 221 is signed, and backdoor to use movinand custom command especially for emmc with ext_csd rev 1.8 is closed.

Sparkas

kang ffu for KMCKT000M4-RXXX/64G