Need File dump A510F

GSM-RADUGA



Bus: 1 bit (SDR 52MHz)
Access mode: sector mode
Power supply: dual-voltage (1.70-1.95V, 2.7-3.6V)
 Card/BGA: BGA (Discrete embedded) - High density MMC
 Manufacturer ID: 0x11 (Toshiba)
 Product name: 400073 (0x343030303733), rev: 0x00, serial number: 0xF735B796
 Manufacturing date: мар 2016
CID: 11010034 30303037 3300F735 B7963300
CSD: D07E0032 0F5903FF FFFFFFE7 8A4000D0
EXT_CSD revision: 1.7 (MMC v5.0, v5.01) 
Partition info:
 Boot1: 4096 KiB
 Boot2: 4096 KiB
 RPMB: 4096 KiB
 User area: 14.68 GiB(15,758,000,128 bytes)
Cache size: 4 MiB
Partition configuration: 0x48
 Boot acknowledge is sent during the boot operation
 Boot partition 1 is enabled for boot
Partitioning support: 0x07
 Device support partitioning feature
 Device can have enhanced technological features
 Device partitioning possible
Boot configuration protection: 0x00
Boot bus conditions: 0x01
  Bus width: x4 (sdr/ddr), boot mode: sdr(default), reset bus width to x1 sdr(default)
Boot area write protection: 0x00
 Power-on write protection: possible
 Permanent write protection: possible
 Lock status: not locked
ANDROID System Info:
 platform: exynos5, cpu abi: armeabi-v7a
 manufacturer: samsung
 board: universal7580, name: a5xeltexx
 brand: samsung, model: SM-A510F
 build id: MMB29K, version: 6.0.1 Marshmallow (MMB29K.A510FXXS3BPI7)
 build description: a5xeltexx-user 6.0.1 MMB29K A510FXXS3BPI7 release-keys
Internal storage: 11.25 GiB
crypto state: unencrypted
https://yadi.sk/d/pBvubf-83WZL7g

Mercusuar45

Thanks bro. Good luck for u

UdinCell

Help. I need File dump Samsung SM-A510F.
Thanks

GSM-RADUGA

UdinCell https://yadi.sk/d/pBvubf-83WZL7g

ShafiulIslamMaruf

sir i need NRD90M. A510FXXS7CRJC Dump file tested

mdshafi

sir plese help oppo a1k auto edl mode problem.my mistake wrong ips jampar............ any solution help

madgoeslim

mdshafi auto edl mode problem

This is not auto edl problem, your device is stuck in emergency mode, also known as PBL Mode which indicate that your CPU(SoC) working just fine, the problem only you have lost connect with flash storage(eMCP). Because you have wrong ISP jumper, so just do measure to the component of the ISP, compare it to the normal working machine, then do replace for faulty component.

tejat901

Ufi box not connect any emmc ic please help me

IwanDwiKrisnanto

@madgoeslim sir, samsung a510fd was not able to boot even i has change thw emmc, the phone stuck in recovery only, its say cant fijd /misc partition, but if i'm give it combination file, the phone boot up and can go into the menu, help please

bigbag

IwanDwiKrisnanto try flashing with full firmware + pit.

IwanDwiKrisnanto

bigbag already do it with many firmware bro, including 4 file + pit, this devices was in binary 8, it can boot up using u8 combination file, but can't boot if full flash using full u8 firmware, always go back into recovery,

bigbag

IwanDwiKrisnanto flashing again with combination file, after phone boot up enter download mode and flashing with latest binary firmware but flashing only sboot, boot, recovery and system.