Hi
Dear friends
How to config boot partition for sm-g900f ?
Partition 1 boot or user area boot?
CC: 3.3 V, VCCQ: 3.0 V
Bus: 1 bit (SDR 52MHz)
Access mode: sector mode
Power supply: dual-voltage (1.70-1.95V, 2.7-3.6V)
Card/BGA: BGA (Discrete embedded) - High density MMC
Manufacturer ID: 0x11 (Toshiba)
Product name: 400073 (0x343030303733), rev: 0x00, serial number: 0xE5DF410D
Manufacturing date: Dec 2015
CID: 11010034 30303037 3300E5DF 410DC230
CSD: D07E0032 0F5903FF FFFFFFE7 8A4000D0
EXT_CSD revision: 1.7 (MMC v5.0, v5.01)
Partition info:
Boot1: 4096 KiB
Boot2: 4096 KiB
RPMB: 4096 KiB
User area: 14.68 GiB(15,758,000,128 bytes)
Cache size: 4 MiB
Hardware reset function: 1
Partition configuration: 0x00
No boot acknowledge is sent (default)
Device is not boot-enabled (default)
Partitioning support: 0x07
Device support partitioning feature
Device can have enhanced technological features
Device partitioning possible
Boot configuration protection: 0x00
Boot bus conditions: 0x00
Boot area write protection: 0x10
Power-on write protection: possible
Permanent write protection: not possible
Lock status: not locked
User area write protection: 0x10
Password protection features: enabled
Power-on write protection: possible
Permanent write protection: not possible
Lock status: not locked