Urgent (Consumed 90% of the reserved block how to solev

jiya

facory reset done but but same Urgent (Consumed 90% of the reserved block

VCC: 3.3 V, VCCQ: 3.0 V
Bus: 8 bit (HS SDR 52MHz)
Access mode: sector mode
Power supply: dual-voltage (1.70-1.95V, 2.7-3.6V)
Card/BGA: BGA (Discrete embedded) - High density MMC
Manufacturer ID: 0x90 (SK Hynix)
Product name: H8G1e (0x483847316505), rev: 0x07, serial number: 0x31D03CF3
Manufacturing date: Sep 2015
CID: 90014A48 38473165 050731D0 3CF39272
CSD: D0270132 0F5903FF FFFFFFEF 8A4040D2
EXT_CSD revision: 1.7 (MMC v5.0, v5.01)
Partition info:
Boot1: 4096 KiB
Boot2: 4096 KiB
RPMB: 4096 KiB
User area: 7.28 GiB(7,818,182,656 bytes)
Cache size: 1 MiB
Hardware reset function: 1
Partition configuration: 0x48
Boot acknowledge is sent during the boot operation
Boot partition 1 is enabled for boot
Partitioning support: 0x07
Device support partitioning feature
Device can have enhanced technological features
Device partitioning possible
Boot configuration protection: 0x00
Boot bus conditions: 0x00
Boot area write protection: 0x00
Power-on write protection: possible
Permanent write protection: possible
Lock status: not locked
User area write protection: 0x50
Password protection features: enabled
Power-on write protection: possible
Permanent write protection: not possible
Lock status: not locked
eÂ·MMC 5.x HEALTH report:
Device lifetime: Urgent (Consumed 90% of the reserved block)
Estimation of the device lifetime (SLC): 0% - 10% device life time used
Estimation of the device lifetime (MLC): 20% - 30% device life time used
Selected: [HYNIX] eNAND H26M41103HPR/8GB (BGA153)
need help how to slove this issue

madgoeslim

jiya Hello, this faulty chip tipically only happen in Sk Hynix. Mostly it will repaired by repartitioning procedure. Please follow the picture shown below how to fix that, and post the result here.

adrin

madgoeslim tnxxxxx

IooObeth

madgoeslim I have a similar problem what if the Samsung brand sir?

MizanurRahmanBishal

madgoeslim other emmc partition ok but bga 221 Warning (Consumed 80% of reserved block

Card/BGA: BGA (Discrete embedded) - High density MMC
Manufacturer ID: 0x15 (Samsung)
Product name: F822MB (0x463832324d42), rev: 0x07, serial number: 0xBEC2C4D0
Manufacturing date: Aug 2016
CID: 15010046 3832324D 4207BEC2 C4D083B8
CSD: D0270132 0F5903FF F6DBFFEF 92404008
EXT_CSD revision: 1.7 (MMC v5.0, v5.01)
Partition info:
Boot1: 4096 KiB
Boot2: 4096 KiB
RPMB: 4096 KiB
User area: 14.56 GiB(15,634,268,160 bytes)
Cache size: 64 MiB
Hardware reset function: 1
Partition configuration: 0x48
Boot acknowledge is sent during the boot operation
Boot partition 1 is enabled for boot
Partitioning support: 0x07
Device support partitioning feature
Device can have enhanced technological features
Device partitioning possible
Boot configuration protection: 0x00
Boot bus conditions: 0x00
Boot area write protection: 0x00
Power-on write protection: possible
Permanent write protection: possible
Lock status: not locked

ANDROID System Info:
platform: MT6580, cpu abi: armeabi-v7a
manufacturer: Symphony
board: i10, name: i10
brand: Symphony, model: i10
build model list: i10
build id: MRA58K, version: 6.0 Marshmallow (MRA58K release-keys)
build description: full_p4200-user 6.0 MRA58K 1506508111 release-keys

Internal storage: 11.33 GiB
crypto state: unencrypted
eMMC 5.x HEALTH report:
Device lifetime: Warning (Consumed 80% of reserved block)
Estimation of the device lifetime (SLC): 10% - 20% device life time used
Estimation of the device lifetime (MLC): 10% - 20% device life time used
WARNING: the "Update eMMC Fw" button is disabled because the eMMC CID has changed.
To enable, you have to restore back the CID using "Restore CID" button.
Selected: [SAMSUNG] moviNAND KMF820012M-B305/16GB+LPDDR3 8Gb (BGA221)

how solves

hossein20

madgoeslim thanx man i do this and this is the resolt VCC: 3.3 V, VCCQ: 3.0 V
Bus: 8 bit (HS SDR 52MHz)
Access mode: sector mode
Power supply: dual-voltage (1.70-1.95V, 2.7-3.6V)
Card/BGA: BGA (Discrete embedded) - High density MMC
Manufacturer ID: 0x90 (SK Hynix)
Product name: H8G4t (0x483847347421), rev: 0x01, serial number: 0x3ADA98BD
Manufacturing date: Sep 2015
CID: 90014A48 38473474 21013ADA 98BD92F0
CSD: D07F0132 0F5903FF FFFFFFEF 8A400012
EXT_CSD revision: 1.7 (MMC v5.0, v5.01)
Partition info:
Boot1: 4096 KiB
Boot2: 4096 KiB
RPMB: 4096 KiB
User area: 7.28 GiB(7,818,182,656 bytes)
Cache size: 1 MiB
Partition configuration: 0x08
No boot acknowledge is sent (default)
Boot partition 1 is enabled for boot
Partitioning support: 0x07
Device support partitioning feature
Device can have enhanced technological features
Device partitioning completed
Boot configuration protection: 0x00
Boot bus conditions: 0x00
Boot area write protection: 0x00
Power-on write protection: possible
Permanent write protection: possible
Lock status: not locked
sorry for my english

mdsiva

madgoeslim sir im also doing this partition . partition done but 90% consumed not remove why i dont know please help cph1901

jiya

thanks its working sir

madgoeslim

jiya You are wellcome. And congratulations to you.

AlekseiHcchjjvcfdd

madgoeslim hi

AlekseiHcchjjvcfdd

madgoeslim hello you have firmware for ufi for phone one plus 5

madgoeslim

Just information to all of you, this trick work on Kingston Chip, I find some kingston chip bga 221 with ext_csd v 1.7 failed to factory reset and failed in Nand Test, so writing process can not be done , fixed by above procedure

mehedihassan

Writing eMMC partition settings...
Device is already partitioned

suraj

i was also victim of this problem but now solved. thank you ufi team

madgoeslim

IooObeth Unfortunately above procedure is not available for samsung chip.

AdamS

How long does eMMC work after such formatting / repairing? In my case eNAND H26M52103FMR / 16GB @ BGA169.
Such action is effective or it is better to replace eMMC with new ones.
Before repair, the eMMC reading is very slow 512KiB to 1MiB, verification of previously read data was incorrect. After the repair, reading and writing takes place at full speed. Data verification is without errors.
Has anyone heard of defects, errors, SkyHynix eMMC ?

AdamS

???

AdamS

madgoeslim

AdamS Health report is read the estimated lifetime left of the nand inside every block of the chip.
Boot 1, Boot 2, and RPMB is made from SLC, this kind of nand is have 20k rewrite cycle compare to MLC which only have 5K rewrite cycle mostly used in Userarea block.
SKHynix chip can be repartitions and restore the health report to normal one, but its not effected in actual estimated lifetime.
So, we can not assure how long the chip can be used after repartitioning procedure.
But, it won't be long if you compared to the new chip or the normal one.

AdamS

Thank you for this information. Do you know which brand eMMC are Better? Samsung, hynix, Toshiba? have the best life?

madgoeslim

AdamS If you read carefully in my previous reply, nand lifetime is depent on type of nand technology used by every block, not by brand.

madgoeslim

hossein20 You are welcome.
If you guys still wondering about what this health report status means, you may follow my previous reply here.