EMMC CONDITION AND DEAD MTK TBLET

helpo

HELLO

HEY GUYS

THIS IS MY FIRST on ufi and in emmc

i have tablet sq - this is info for it from another tool

Device Brand : GWIN
Device Model : a7237t
Device CPU : MT6572
Device IntName : a7237t
Device Version : 4.4.2
Device Compile : 9/15/2017 8:31:08 AM
Device Project : ALPS.KK1.MP7.V1.22
Device ExtInfo : M500-T

it have a problem hanging sometimes and give errors stop setting etc >>
i try by other tools to do wipe data and factory rest clear emmc it give me successful but the programs data still
inside the problem is emmc

and then format dead i try to recover it by bin file scatter it give me fail coz preloader is erased

i remove emmc from board and this is logs:

ufi Insertion test... Done.
Init bus...
VCC: 3.3 V, VCCQ: 3.0 V
Bus: 1 bit (SDR 52MHz)
Access mode: sector mode
Power supply: dual-voltage (1.70-1.95V, 2.7-3.6V)
Card/BGA: BGA (Discrete embedded) - High density MMC
Manufacturer ID: 0x15 (Samsung)
Product name: N5U00M (0x4e355530304d), rev: 0x02, serial number: 0x71025D8B
Manufacturing date: Aug 2013
CID: 1501004E 35553030 4D027102 5D8B80C8
CSD: D0270132 0F5903FF F6DBFFE1 8E40604C
Permanent write protection enabled
EXT_CSD revision: 1.5 (MMC v4.41)
Partition info:
Boot1: 2048 KiB
Boot2: 2048 KiB
RPMB: 128 KiB
User area: 3.64 GiB(3,909,091,328 bytes)
Hardware reset function: 1
Partition configuration: 0x48
Boot acknowledge is sent during the boot operation
Boot partition 1 is enabled for boot
Partitioning support: 0x03
Device support partitioning feature
Device can have enhanced technological features
Device partitioning possible
Boot configuration protection: 0x00
Boot bus conditions: 0x00
Boot area write protection: 0x00
Power-on write protection: possible
Permanent write protection: possible
Lock status: not locked
User area write protection: 0x50
Password protection features: enabled
Power-on write protection: possible
Permanent write protection: not possible
Lock status: not locked
Selected: [SAMSUNG] moviNAND KMN5U000ZM-B203/4GB+LPDDR2 4Gb(x32) (BGA162

after press disable perm write protection give me this

Boot version: 1.04, FW version: 1.10 (Mar 26 2017 14:24:34)
Insertion test... Done.
Init bus...
VCC: 3.3 V, VCCQ: 3.0 V
Bus: 1 bit (SDR 52MHz)
Access mode: sector mode
Power supply: dual-voltage (1.70-1.95V, 2.7-3.6V)
Card/BGA: BGA (Discrete embedded) - High density MMC
Manufacturer ID: 0x15 (Samsung)
Product name: N5U00M (0x4e355530304d), rev: 0x02, serial number: 0x71025D8B
Manufacturing date: Aug 2013
CID: 1501004E 35553030 4D027102 5D8B80C8
CSD: D0270132 0F5903FF F6DBFFE1 8E404028
EXT_CSD revision: 1.5 (MMC v4.41)
Partition info:
Boot1: 2048 KiB
Boot2: 2048 KiB
RPMB: 128 KiB
User area: 3.64 GiB(3,909,091,328 bytes)
Hardware reset function: 1
Partition configuration: 0x48
Boot acknowledge is sent during the boot operation
Boot partition 1 is enabled for boot
Partitioning support: 0x03
Device support partitioning feature
Device can have enhanced technological features
Device partitioning possible
Boot configuration protection: 0x00
Boot bus conditions: 0x00
Boot area write protection: 0x00
Power-on write protection: possible
Permanent write protection: possible
Lock status: not locked
User area write protection: 0x50
Password protection features: enabled
Power-on write protection: possible
Permanent write protection: not possible
Lock status: not locked
Selected: [SAMSUNG] moviNAND KMN5U000ZM-B203/4GB+LPDDR2 4Gb(x32) (BGA162)

as i said iam new and need help >

when can i know i can revive such a problem and what is the every button do in genrel and in my specifc problem

thx in advANCE

helpo

SMART REPORT

Boot version: 1.04, FW version: 1.10 (Mar 26 2017 14:24:34)

Insertion test... Done.
Init bus...
VCC: 3.3 V, VCCQ: 3.0 V
Bus: 1 bit (SDR 52MHz)
Access mode: sector mode
Power supply: dual-voltage (1.70-1.95V, 2.7-3.6V)
Card/BGA: BGA (Discrete embedded) - High density MMC
Manufacturer ID: 0x15 (Samsung)
Product name: N5U00M (0x4e355530304d), rev: 0x02, serial number: 0x71025D8B
Manufacturing date: Aug 2013
CID: 1501004E 35553030 4D027102 5D8B80C8
CSD: D0270132 0F5903FF F6DBFFE1 8E404028
EXT_CSD revision: 1.5 (MMC v4.41)
Partition info:
Boot1: 2048 KiB
Boot2: 2048 KiB
RPMB: 128 KiB
User area: 3.64 GiB(3,909,091,328 bytes)

moviNAND Smart report:
Error Mode: 0xD2D2D2D2 (Normal)
Super Block Size: 3 MiB
Super Page Size: 16 KiB
Optimal Write Size: 16 KiB
Number Of Banks: 1
Bad Block info:
Bank0 Init Bad Block: 33
Bank0 Runtime Bad Block: 2
Bank0 Remain Reserved Block: 0
Max. Erase Count: 0
Min. Erase Count: 0
Avg. Erase Count: 0
Read Reclaim cnt: 0
Optimal Trim Size: 8 KiB
Firmware Hash Code: ff0df2ca4b8b6c9444ddcac4bb3901d5f6d8279b27538fef3324e2ded4f2b94f
Max. Erase Count (SLC): 0
Min. Erase Count (SLC): 0
Avg. Erase Count (SLC): 0
Max. Erase Count (MLC): 0
Min. Erase Count (MLC): 0
Avg. Erase Count (MLC): 0
ECC Uncorrectable Errors: 1423
[0,0] block: 63562, die: 0, chip: 0, count: 186, offset: 0, page: 164
[0,1] block: 65535, die: 0, chip: 0, count: 0, offset: 0, page: 0
[1,0] block: 2048, die: 255, chip: 255, count: 74, offset: 248, page: 0
[1,1] block: 186, die: 165, chip: 0, count: 255, offset: 255, page: 0
[2,0] block: 0, die: 0, chip: 0, count: 0, offset: 8, page: 65535
[2,1] block: 63818, die: 0, chip: 0, count: 187, offset: 0, page: 164
[3,0] block: 65535, die: 0, chip: 0, count: 0, offset: 0, page: 0
[3,1] block: 2048, die: 255, chip: 255, count: 74, offset: 249, page: 0
[4,0] block: 187, die: 165, chip: 0, count: 255, offset: 255, page: 0
[4,1] block: 0, die: 0, chip: 0, count: 0, offset: 8, page: 65535
[5,0] block: 64074, die: 0, chip: 0, count: 188, offset: 0, page: 164
[5,1] block: 65535, die: 0, chip: 0, count: 0, offset: 0, page: 0
[6,0] block: 2048, die: 255, chip: 255, count: 74, offset: 250, page: 0
[6,1] block: 188, die: 165, chip: 0, count: 255, offset: 255, page: 0
[7,0] block: 0, die: 0, chip: 0, count: 0, offset: 8, page: 65535
[7,1] block: 0, die: 0, chip: 0, count: 0, offset: 0, page: 0
[8,0] block: 0, die: 0, chip: 0, count: 0, offset: 0, page: 0
[8,1] block: 0, die: 0, chip: 0, count: 0, offset: 0, page: 0
[9,0] block: 0, die: 0, chip: 0, count: 0, offset: 0, page: 0
[9,1] block: 0, die: 0, chip: 0, count: 0, offset: 0, page: 0
Erase Unit Size: 192 KiB
FW ID: VHX1, Date: 20120813 (564858312607112002008f5013081220)
FCB Scan result: 0
FTL Open Count: 1

madgoeslim

helpo ECC Uncorrectable Errors: 1423

This number show how many error that can't be corrected by ECC inside eMMC Flash management controller, in other words, the EMMC is in bad or dying conditions and need to be replace.

helpo

where is the supporters plz i need help here

helpo

for the samsung emmc type BGA162

WHEN I OPEN EMMC TOOL BOX IT GIVE ME FIND MORE THAN MORE IDENTICAL ID >

helpo

ok i have another one is sky hynix
i program it by box
this is LOGS

enter code he Card/BGA: BGA (Discrete embedded) - High density MMC

Manufacturer ID: 0x90 (SK Hynix)
Product name: H4G1d (0x483447316404), rev: 0x05, serial number: 0x02A2CF90
Manufacturing date: Sep 2014
CID: 90014A48 34473164 040502A2 CF9091E4
CSD: D0270132 0F5903FF FFFFFFEF 8A4040D2
EXT_CSD revision: 1.6 (MMC v4.5, v4.51)
Partition info:
Boot1: 4096 KiB
Boot2: 4096 KiB
RPMB: 4096 KiB
User area: 3.64 GiB(3,909,091,328 bytes)
Cache size: 512 KiB
Hardware reset function: 1
Partition configuration: 0x48
Boot acknowledge is sent during the boot operation
Boot partition 1 is enabled for boot
Partitioning support: 0x07
Device support partitioning feature
Device can have enhanced technological features
Device partitioning possible
Boot configuration protection: 0x00
Boot bus conditions: 0x00
Boot area write protection: 0x00
Power-on write protection: possible
Permanent write protection: possible
Lock status: not locked
EXT_CSD backup saved to "\%BACKUPS%\H4G1d_02A2CF90.ext_csd"
ANDROID ROM info:
platform: MT6572, cpu abi: armeabi-v7a
manufacturer: Samsung
board: y7262, name: GT-S7582
brand: samsung, model: GT-S7582
build id: JDQ39, version: 4.2.2 Jelly Bean (JDQ39.S7582XXUANA3)
build description: y7262-user 4.2.2 JDQ39 eng.cb.1417862753 test-keys
Selected: [HYNIX] eNAND H26M31002GPR/4GB (BGA153)
Connection status: EHCI:HUB:HUB:USB 2.0 High-Speed
Interface: UFI High-Speed
Serial number: 0011-8840-1509
Boot version: 1.04, FW version: 1.10 (Mar 26 2017 14:24:34)
Insertion test... Done.
Init bus...
VCC: 3.3 V, VCCQ: 3.0 V
Bus: 4 bit (HS SDR 52MHz)
Access mode: sector mode
Power supply: dual-voltage (1.70-1.95V, 2.7-3.6V)
Card/BGA: BGA (Discrete embedded) - High density MMC
Manufacturer ID: 0x90 (SK Hynix)
Product name: H4G1d (0x483447316404), rev: 0x05, serial number: 0x02A2CF90
Manufacturing date: Sep 2014
CID: 90014A48 34473164 040502A2 CF9091E4
CSD: D0270132 0F5903FF FFFFFFEF 8A4040D2
EXT_CSD revision: 1.6 (MMC v4.5, v4.51)
Partition info:
Boot1: 4096 KiB
Boot2: 4096 KiB
RPMB: 4096 KiB
User area: 3.64 GiB(3,909,091,328 bytes)
Cache size: 512 KiB
Hardware reset function: 1
Partition configuration: 0x48
Boot acknowledge is sent during the boot operation
Boot partition 1 is enabled for boot
Partitioning support: 0x07
Device support partitioning feature
Device can have enhanced technological features
Device partitioning possible
Boot configuration protection: 0x00
Boot bus conditions: 0x00
Boot area write protection: 0x00
Power-on write protection: possible
Permanent write protection: possible
Lock status: not locked
ANDROID ROM info:
platform: MT6572, cpu abi: armeabi-v7a
manufacturer: Samsung
board: y7262, name: GT-S7582
brand: samsung, model: GT-S7582
build id: JDQ39, version: 4.2.2 Jelly Bean (JDQ39.S7582XXUANA3)
build description: y7262-user 4.2.2 JDQ39 eng.cb.1417862753 test-keys
Selected: [HYNIX] eNAND H26M31002GPR/4GB (BGA153)re

helpo

CAN I REPLACE IT WITH OLD ONE AND ALSO IN THE FUTURE HOW CAN I KNOW WHICH IS THE SIMILAR EMMC CAN I REPLACE IT
How to know the appropriate memory or rather BY THE NUMBER OF IC I MEAN LIKE HERE BGA162 BGA152

madgoeslim

helpo
Hello, Since UFI v.1.2.0.429 we add Hardware Information database, include Storage ID[eMMC/UFS product name] for many popular android devices. You can check it by selecting Brand and Model, and see at the log window [required internet connection].

helpo

the problem is i have an unknown tablet china company not listed
is sq
model m500

info from another mtk gsm tool
Device Brand : GWIN
Device Model : a7237t
Device CPU : MT6572
Device IntName : a7237t
Device Version : 4.4.2
Device Compile : 9/15/2017 8:31:08 AM
Device Project : ALPS.KK1.MP7.V1.22
Device ExtInfo : M500-T

helpo

this is logs for the new emmc after write flash
Insertion test... Done.
Init bus...
VCC: 3.3 V, VCCQ: 3.0 V
Bus: 4 bit (HS SDR 52MHz)
Access mode: sector mode
Power supply: dual-voltage (1.70-1.95V, 2.7-3.6V)
Card/BGA: BGA (Discrete embedded) - High density MMC
Manufacturer ID: 0x90 (SK Hynix)
Product name: H4G1d (0x483447316404), rev: 0x05, serial number: 0x02A2CF90
Manufacturing date: Sep 2014
CID: 90014A48 34473164 040502A2 CF9091E4
CSD: D0270132 0F5903FF FFFFFFEF 8A4040D2
EXT_CSD revision: 1.6 (MMC v4.5, v4.51)
Partition info:
Boot1: 4096 KiB
Boot2: 4096 KiB
RPMB: 4096 KiB
User area: 3.64 GiB(3,909,091,328 bytes)
Cache size: 512 KiB
Hardware reset function: 1
Partition configuration: 0x48
Boot acknowledge is sent during the boot operation
Boot partition 1 is enabled for boot
Partitioning support: 0x07
Device support partitioning feature
Device can have enhanced technological features
Device partitioning possible
Boot configuration protection: 0x00
Boot bus conditions: 0x00
Boot area write protection: 0x00
Power-on write protection: possible
Permanent write protection: possible
Lock status: not locked

ANDROID System Info:
platform: MT6572, cpu abi: armeabi-v7a
manufacturer: GWIN
board: a7237t, name: a7237t
brand: GWIN, model: M500-TV
build id: KOT49H, version: 4.4.2 Lollipop (M500-TV_V1.5)
build description: a7237t-user 4.4.2 KOT49H eng.gwin02.1505464174 test-keys

helpo

iam new here
and iam just software technician>
tab still dead
i just want to make sure do i program it well or the difference between emmc
or i don't put well in board by the way hw technician who do it to me >

Amine

try to do update emmc for repair error and again check smart raport if normal (green) after that just go tab mediatek and select scatter file from factory flash and select just preloader + write that's all