WARNING: Number of ECC Uncorrectable Errors: 3

Ghofar

WARNING: Number of ECC Uncorrectable Errors: 3
What's wrong with my box?

madgoeslim

Ghofar This error is not box error, but your eMMC is damage

SOMAD

madgoeslim This error is not box error, but your eMMC is damage

njiih 😃

hermawanherry try to update emmc fw and then check the ecc error again

worth a try 😃

Ghofar

Besides, why my box is often not connected. When I've given extra voltage on the socket. Whether that might make emmc corrupt and the above error message appears?

hermawanherry

Ghofar try to update emmc fw and then check the ecc error again

islamsari

ECC Uncorrectable Errors: 22
i tray upate emmc fw my problem solve

Connection status: EHCI:HUB:HUB:USB 2.00 High-Speed
Interface: UFI High-Speed
Serial number: 0011-8841-8672
Boot version: 1.05, FW version: 1.13 (Aug 19 2019 23:46:09)
Insertion test... Done
Init bus...
VCC: 3.3 V, VCCQ: 3.0 V
Bus: 1 bit (SDR 24MHz)
Access mode: sector mode
Power supply: dual-voltage (1.70-1.95V, 2.7-3.6V)
Card/BGA: BGA (Discrete embedded) - High density MMC
Manufacturer ID: 0x15 (Samsung)
Product name: N5U00M (0x4e355530304d), rev: 0x02, serial number: 0xE9A37E43
Manufacturing date: Mar 2013
CID: 1501004E 35553030 4D02E9A3 7E433064
CSD: D0270132 0F5903FF F6DBFFE1 8E404028
EXT_CSD revision: 1.5 (MMC v4.41)
Partition info:
Boot1: 2048 KiB
Boot2: 2048 KiB
RPMB: 128 KiB
User area: 3.64 GiB(3,909,091,328 bytes)

moviNAND Smart report:
Error Mode: 0xD2D2D2D2 (Normal)
Super Block Size: 3 MiB
Super Page Size: 16 KiB
Optimal Write Size: 16 KiB
Number Of Banks: 1
Bad Block info:
Bank0 Init Bad Block: 1
Bank0 Runtime Bad Block: 0
Bank0 Remain Reserved Block: 34
Max. Erase Count: 0
Min. Erase Count: 0
Avg. Erase Count: 0
Read Reclaim cnt: 0
Optimal Trim Size: 8 KiB
Firmware Hash Code: ff0df2ca4b8b6c9444ddcac4bb3901d5f6d8279b27538fef3324e2ded4f2b94f
Max. Erase Count (SLC): 0
Min. Erase Count (SLC): 0
Avg. Erase Count (SLC): 0
Max. Erase Count (MLC): 0
Min. Erase Count (MLC): 0
Avg. Erase Count (MLC): 0
ECC Uncorrectable Errors: 0
Erase Unit Size: 192 KiB
FW ID: VHX1, Date: 20120813 (564858312607112002008f5013081220)
FCB Scan result: 0
FTL Open Count: 3

alikhoso0786

WARNING: Number of ECC Uncorrectable Errors: 5

Connection status: XHCI:HUB3:USB 2.00 High-Speed
Interface: UFI High-Speed
Serial number: 0011-8840-6247
Boot version: 1.04, FW version: 1.13 (Aug 19 2019 23:46:09)
Init bus...
VCC: 3.3 V, VCCQ: 1.8 V
Bus: 1 bit (SDR 48MHz)
Access mode: sector mode
Power supply: dual-voltage (1.70-1.95V, 2.7-3.6V)
Card/BGA: BGA (Discrete embedded) - High density MMC
Manufacturer ID: 0x15 (Samsung)
Product name: FN12MB (0x464e31324d42), rev: 0x00, serial number: 0xC6CBE40F
Manufacturing date: Mar 2016
CID: 15010046 4E31324D 4200C6CB E40F3372
CSD: D0270132 0F5903FF F6DBFFEF 8E40400C
EXT_CSD revision: 1.7 (MMC v5.0, v5.01)
Partition info:
Boot1: 4096 KiB
Boot2: 4096 KiB
RPMB: 512 KiB
User area: 7.28 GiB(7,818,182,656 bytes)
Cache size: 64 MiB
Partition configuration: 0x00
No boot acknowledge is sent (default)
Device is not boot-enabled (default)
Partitioning support: 0x07
Device support partitioning feature
Device can have enhanced technological feature
Device partitioning possible
Boot configuration protection: 0x00
Boot bus conditions: 0x00
Boot area write protection: 0x00
Power-on write protection: possible
Permanent write protection: possible
Lock status: not locked
WARNING: Number of ECC Uncorrectable Errors: 5
Selected: [SAMSUNG] KMFN10012M/8GB (BGA221)