when i write dump file error is coming last stage see here log
Bus: 1 bit (SDR 4MHz)
Access mode: sector mode
Power supply: dual-voltage (1.70-1.95V, 2.7-3.6V)
Card/BGA: BGA (Discrete embedded) - High density MMC
Manufacturer ID: 0x90 (SK Hynix)
Product name: H4G2b (0x483447326211), rev: 0x01, serial number: 0x42CB41E8
Manufacturing date: Apr 2016
CID: 90014A48 34473262 110142CB 41E8431A
CSD: D07F0132 0F5903FF FFFFFFEF 8A4040DA
EXT_CSD revision: 1.6 (MMC v4.5, v4.51)
Partition info:
Boot1: 4096 KiB
Boot2: 4096 KiB
RPMB: 4096 KiB
User area: 3.64 GiB(3,909,091,328 bytes)
Current partition access:
Access to boot partition 1
Loading file: "\%BACKUPS%\Samsung\GT-I9060\boot1.bin", size: 2 MiB...
Writing boot1 (4096 sectors)... Done in 4.557 s
Current partition access:
Access to boot partition 2
Loading file: "\%BACKUPS%\Samsung\GT-I9060\boot2.bin", size: 2 MiB...
Writing boot2 (4096 sectors)... Done in 4.690 s
Current partition access:
Access to user area
Loading file: "\%BACKUPS%\Samsung\GT-I9060\userarea.bin", size: 512 MiB...
Writing userarea (524288 sectors)... Done in 9 mins 36.543 s
Loading file: "\%BACKUPS%\Samsung\GT-I9060\ext_csd.bin", size: 512 bytes...
Writing extcsd, 512 bytes... Done.
Failed to initialize eMMC (return code: 6, CMD Error: Invalid Voltage Range) !!!
CMD1 error, cmd response: 0x40FF8080, card state: 255 (Card is in unknown state)
SEND_OP_COND command failed.
