Connection status: IUSB3HUB:USB 2.0 High-Speed
Interface: UFI High-Speed
Serial number: 0011-8840-0298
Boot version: 1.04, FW version: 1.11 (Dec 6 2017 17:13:32)
Insertion test... Done.
Init bus...
VCC: 3.3 V, VCCQ: 3.0 V
Bus: 1 bit (HS SDR 52MHz)
Access mode: sector mode
Power supply: dual-voltage (1.70-1.95V, 2.7-3.6V)
Card/BGA: BGA (Discrete embedded) - High density MMC
Manufacturer ID: 0x15 (Samsung)
Product name: N5XZMB (0x4e35585a4d42), rev: 0x01, serial number: 0x1435D06D
Manufacturing date: Mar 1998
CID: 1501004E 35585A4D 42011435 D06D3116
CSD: D0270132 0F5903FF F6DBFFEF 8E40400C
EXT_CSD revision: 1.255 (MMC )
Partition info:
Boot1: 32640 KiB (enhanced)
Boot2: 32640 KiB (enhanced)
RPMB: 32640 KiB (enhanced)
User area: -512 bytes(33,423,360 bytes) (enhanced)
GP1: 255.50 MiB (enhanced)
GP2: 255.50 MiB (enhanced)
GP3: 255.50 MiB (enhanced)
GP4: 255.50 MiB (enhanced)
Hardware reset function: 255
Partition configuration: 0xFF
Boot acknowledge is sent during the boot operation
User area is enabled for boot
Partitioning support: 0xFF
Device support partitioning feature
Device can have enhanced technological features
Device partitioning possible
Boot configuration protection: 0xFF
Change of boot configuration register bits relating boot mode operation is permanently disabled.
Boot bus conditions: 0xFF
reserved, boot mode: reserved, retain bus width and boot mode
Boot area write protection: 0xFF
Power-on write protection: not possible
Permanent write protection: not possible
Lock status: locked until next power on
User area write protection: 0xFF
Password protection features: disabled
Power-on write protection: not possible
Permanent write protection: not possible
Lock status: locked until next power on
Invalid sector count.
Failed to switch partition to 0, error code: 36
CMD8 error, cmd response: 0x900, card state: 4 (Card is in transfer state)
status: unknown (0)
