Connection status: XHCI:HUB3:USB 2.00 High-Speed
Interface: UFI High-Speed
Serial number: 0011-8841-1593
Boot version: 1.04, FW version: 1.13 (Aug 19 2019 23:46:09)
Insertion test... Done
VCCQ not properly connected
Init bus...
VCC: 3.3 V, VCCQ: 1.8 V
Bus: 1 bit (SDR 4MHz)
Access mode: sector mode
Power supply: dual-voltage (1.70-1.95V, 2.7-3.6V)
Card/BGA: BGA (Discrete embedded) - High density MMC
Manufacturer ID: 0x15 (Samsung)
Product name: QE63MB (0x514536334d42), rev: 0x04, serial number: 0xE1CCAA8B
Manufacturing date: Feb 2019
CID: 15010051 4536334D 4204E1CC AA8B2600
CSD: D0270132 0F5903FF F6DBFFEF 8E40400C
EXT_CSD revision: 1.8 (MMC v5.1)
Partition info:
Boot1: 4096 KiB
Boot2: 4096 KiB
RPMB: 4096 KiB
User area: 14.56 GiB(2,197,796,421,632 bytes)
[33]Failed to Switch (return code: 2, CMD Error: CMD CRC fail) !!!
Loading file: "\C:\Users\Android%20Hacker%20!\Desktop\CPH1853_11_A.22%20Tested%20by%20GSS_TEAM\CPH1853_11_A.22%20Tested%20by%20GSS_TEAM\QE63MB_1449093157_20190816_1929.extcsd", size: 512 bytes...
Writing extcsd, 512 bytes... [175]Failed to Switch (return code: 2, CMD Error: CMD CRC fail) !!!
Done
Failed to initialize eMMC (return code: 2, CMD Error: CMD CRC fail) !!!
CMD2 error, cmd response: 0x1D010051, card state: 255 (Card is in unknown state)
ALL_SEND_CID command failed.