Oppo A3s Factory Reset successfully Done By UFI Box

farhaankhan613

Oppo A3s Factory Reset successfully Done By UFI Box## Heading ##

Connection status: EHCI:HUB:USB 2.0 High-Speed
Interface: UFI High-Speed
Serial number: 0011-8840-0229
Boot version: 1.04, FW version: 1.12 (Jun 7 2018 00:06:47)
Init bus...
VCC: 3.3 V, VCCQ: 1.8 V
Bus: 1 bit (SDR 48MHz)
Access mode: sector mode
Power supply: dual-voltage (1.70-1.95V, 2.7-3.6V)
Card/BGA: BGA (Discrete embedded) - High density MMC
Manufacturer ID: 0x15 (Samsung)
Product name: QE63MB (0x514536334d42), rev: 0x03, serial number: 0xF3A20690
Manufacturing date: May 2018
CID: 15010051 4536334D 4203F3A2 0690555E
CSD: D0270132 0F5903FF F6DBFFEF 8E40400C
EXT_CSD revision: 1.8 (MMC v5.1)
Partition info:
Boot1: 4096 KiB
Boot2: 4096 KiB
RPMB: 4096 KiB
User area: 14.56 GiB(15,634,268,160 bytes)
Cache size: 64 MiB
Hardware reset function: 1
Partition configuration: 0x38
No boot acknowledge is sent (default)
User area is enabled for boot
Partitioning support: 0x07
Device support partitioning feature
Device can have enhanced technological features
Device partitioning possible
Boot configuration protection: 0x00
Boot bus conditions: 0x00
Boot area write protection: 0x00
Power-on write protection: possible
Permanent write protection: possible
Lock status: not locked
ANDROID System Info:
platform: msm8953, cpu abi: arm64-v8a
manufacturer: OPPO
board: msm8953, name: CPH1803
brand: OPPO, model: CPH1803(OPPO A3s)
build id: OPM1.171019.026, version: 8.1.0 Oreo (CPH1803EX_11_A.12)
build description: msm8953_64-user 8.1.0 OPM1.171019.026 eng.root.20180927.160930 release-keys
crypto state: encrypted?
Custom moviNAND command is not supported for this device(MMC51).
Selected: [SAMSUNG] KMQE60013M-B318/16GB+LPDDR3 16Gb (BGA221)
Connection status: EHCI:HUB:USB 2.0 High-Speed
Interface: UFI High-Speed
Serial number: 0011-8840-0229
Boot version: 1.04, FW version: 1.12 (Jun 7 2018 00:06:47)
Init bus...
VCC: 3.3 V, VCCQ: 1.8 V
Bus: 1 bit (SDR 48MHz)
Access mode: sector mode
Power supply: dual-voltage (1.70-1.95V, 2.7-3.6V)
Card/BGA: BGA (Discrete embedded) - High density MMC
Manufacturer ID: 0x15 (Samsung)
Product name: QE63MB (0x514536334d42), rev: 0x03, serial number: 0xF3A20690
Manufacturing date: May 2018
CID: 15010051 4536334D 4203F3A2 0690555E
CSD: D0270132 0F5903FF F6DBFFEF 8E40400C
EXT_CSD revision: 1.8 (MMC v5.1)
Partition info:
Boot1: 4096 KiB
Boot2: 4096 KiB
RPMB: 4096 KiB
User area: 14.56 GiB(15,634,268,160 bytes)
Factory Reset...
Creating filesystem... Done.
Writing cache... Done.
Creating filesystem... Done.
Writing userdata... Done.
Done.

GATRAD_MOBILE

Nice work Bro

Ashari

Nice Bro

Yusufalifbaataa

I tried the OPPO A3S with the latest version of the ISP ufi EMMc toolbox, the factory reset was successful but cellular brick

Connection status: XHCI:HUB3:USB 2.0 High-Speed
Interface: UFI High-Speed
Serial number: 0011-8840-0708
Boot version: 1.04, FW version: 1.12 (Jun 7 2018 00:06:47)
Insertion test... Done.
VCCQ not properly connected
Init bus...
VCC: 3.3 V, VCCQ: 1.8 V
Bus: 1 bit (SDR 4MHz)
Access mode: sector mode
Power supply: dual-voltage (1.70-1.95V, 2.7-3.6V)
Card/BGA: BGA (Discrete embedded) - High density MMC
Manufacturer ID: 0x90 (SK Hynix)
Product name: HAG4a2 (0x484147346132), rev: 0xA5, serial number: 0x08B464C4
Manufacturing date: Jun 2018
CID: 90014A48 41473461 32A508B4 64C465F2
CSD: D0270132 8F5903FF FFFFFFE7 8A400016
EXT_CSD revision: 1.8 (MMC v5.1)
Partition info:
Boot1: 4096 KiB
Boot2: 4096 KiB
RPMB: 4096 KiB
User area: 14.68 GiB(15,758,000,128 bytes)
Cache size: 1 MiB
Hardware reset function: 1
Partition configuration: 0x38
No boot acknowledge is sent (default)
User area is enabled for boot
Partitioning support: 0x07
Device support partitioning feature
Device can have enhanced technological features
Device partitioning possible
Boot configuration protection: 0x00
Boot bus conditions: 0x00
Boot area write protection: 0x00
Power-on write protection: possible
Permanent write protection: possible
Lock status: not locked

ANDROID System Info:
platform: msm8953, cpu abi: arm64-v8a
manufacturer: OPPO
board: msm8953, name: CPH1803
brand: OPPO, model: CPH1803(OPPO A3s)
build id: OPM1.171019.026, version: 8.1.0 Oreo (CPH1803EX_11_A.12)
build description: msm8953_64-user 8.1.0 OPM1.171019.026 eng.root.20180927.160930 release-keys

Internal storage: 9.30 GiB
crypto state: unencrypted
Selected: [HYNIX] H9TQ17ADFTACUR/16GB+LPDDR3 24Gb (BGA221)

Yusufalifbaataa

cellphone is dead, what's wrong can anyone help?

Amine

me too same problem after factory reset phone dead whts problem how to sloved

Moyal_Softwares

Oppo A3S eMMC Dump Tested!!

https://romdevelopers.com/index.php?a=downloads&b=file&id=10294

AdrianT

Moyal_Softwares I did download the file, but dont know how to flash, can you show it to us? thanks

Amine

bro can you upload that dump because need buy package in ROMDevelopers
realy i need it urgently

Yusufalifbaataa

I need

Wolverin

PLS_HELP_TEAM_DEAD AFTER FACTORY RESET________________________(CPH1803EX_11_A.15)

Boot1: 4096 KiB
Boot2: 4096 KiB
RPMB: 4096 KiB
User area: 29.12 GiB(31,268,536,320 bytes)
Factory Reset...
Creating filesystem... Done.
Writing cache... Done.
Creating filesystem... Done.
Writing userdata... Done.
Done.

Mahadi

Wolverin i have same problem about 3 days. but the problem solve with jumper resistor clock. maybe in direct process was make resistor broken. so i try to jumper 2 pin resistor with cable and the phone can turning on again. it's really experience today. i love you all.

madgoeslim

Hello everyone,
Factory Reset procedure only formating userdata and cache partition, will never cause deadboot issue.
Just remember, all you do is by using ISP Methode.
And doing ISP job need good soldering skill.
If your device brick after above procedure, please double check at component (r or c) needed by chip to working properly, measure it precisely to make sure you don't make any mistake while doing the soldering job.

PROSPEROchannel

madgoeslim bagai mana dengan masalah stuck di recovery mode suhu?
apa solusinya? mohon pencerahan..terimakasih...

AdrianT

Mahadi how you do that? Can show the Pic?

AdrianT

still no solution TEAM UFI?

lestari

oppo a3s setelah buka kunci via direk (special task) done . tapi malah matot detek 9008.. tolong gan mungkin ada yg pernah dapat kasus spt ini

SamirShaikh

i need dump file

BestWorldBd

Connection status: XHCI:HUB3:USB 2.00 High-Speed
Interface: UFI High-Speed
Serial number: 0011-8841-1593
Boot version: 1.04, FW version: 1.13 (Aug 19 2019 23:46:09)
Insertion test... Done
VCCQ not properly connected
Init bus...
VCC: 3.3 V, VCCQ: 1.8 V
Bus: 1 bit (SDR 4MHz)
Access mode: sector mode
Power supply: dual-voltage (1.70-1.95V, 2.7-3.6V)
Card/BGA: BGA (Discrete embedded) - High density MMC
Manufacturer ID: 0x15 (Samsung)
Product name: QE63MB (0x514536334d42), rev: 0x04, serial number: 0xE1CCAA8B
Manufacturing date: Feb 2019
CID: 15010051 4536334D 4204E1CC AA8B2600
CSD: D0270132 0F5903FF F6DBFFEF 8E40400C
EXT_CSD revision: 1.8 (MMC v5.1)
Partition info:
Boot1: 4096 KiB
Boot2: 4096 KiB
RPMB: 4096 KiB
User area: 14.56 GiB(2,197,796,421,632 bytes)

[33]Failed to Switch (return code: 2, CMD Error: CMD CRC fail) !!!
Loading file: "\C:\Users\Android%20Hacker%20!\Desktop\CPH1853_11_A.22%20Tested%20by%20GSS_TEAM\CPH1853_11_A.22%20Tested%20by%20GSS_TEAM\QE63MB_1449093157_20190816_1929.extcsd", size: 512 bytes...
Writing extcsd, 512 bytes... [175]Failed to Switch (return code: 2, CMD Error: CMD CRC fail) !!!
Done
Failed to initialize eMMC (return code: 2, CMD Error: CMD CRC fail) !!!
CMD2 error, cmd response: 0x1D010051, card state: 255 (Card is in unknown state)
ALL_SEND_CID command failed.