please help
Change new eMCP advan i5c lite
irmware package: i5C_Lite_LF5061AV_V1.0_20171115
Connecting to Download port...
Make sure battery is fully charged before flashing !!!
Power off the phone, Disconnect and reconnect the battery(if possible), Hold the VOL DOWN or VOL UP+DOWN and connect USB cable
Scanning Download port... Done.
Detected SPRD U2S Diag (COM6)
Connection status: EHCI:HUB:USB 2.0 High-Speed
USB Driver: [DriverCoding Corporation] sprdvcom, version: 2.0.0.114, date: 6-27-2014
Boot id: SPRD3
Sending FDL ... Done.
Boot version: Spreadtrum Boot Block version 1.1
Change baudrate to 460800 ... Done.
Sending NAND_FDL ... Done.
Reading l_fixnv1, size: 1 MiB... Done.
Reading prodnv, size: 5 MiB... Done.
Reading miscdata, size: 1 MiB... Done.
Downloading l_fixnv1, size: 793.99 KiB... Done.
Downloading prodnv, size: 5 MiB... Done.
Downloading miscdata, size: 1 MiB... Done.
Erasing uboot... Done.
Downloading splloader, size: 34.04 KiB... Done.
Downloading l_modem, size: 18.85 MiB... Done.
Downloading l_deltanv, size: 28 bytes... Done.
Downloading l_ldsp, size: 3 MiB... Done.
Downloading l_gdsp, size: 5 MiB... Done.
Downloading pm_sys, size: 38.93 KiB... Done.
Downloading wcnmodem, size: 1.13 MiB... Done.
Downloading boot, size: 16.54 MiB... Done.
Downloading recovery, size: 19.10 MiB... Done.
Downloading sysinfo, size: 5 MiB... Done.
Downloading system, size: 2.93 GiB... write failed at 0x0555F000, error: Verify error
Completed in 1 min 9.966 s
maybe someone have tuttorial change and flashing eMCP for advan i5c lite
