LAVA Flair Z1 emmc repair after mobile not power ON
what is problem?
Connection status: EHCI:HUB:HUB:HUB:USB 2.0 High-Speed
Interface: UFI High-Speed
Serial number: 0011-8840-5166
Boot version: 1.04, FW version: 1.12 (Jun 7 2018 00:06:47)
Insertion test... Done.
Init bus...
VCC: 3.3 V, VCCQ: 3.0 V
Bus: 8 bit (HS SDR 52MHz)
Access mode: sector mode
Power supply: dual-voltage (1.70-1.95V, 2.7-3.6V)
Card/BGA: BGA (Discrete embedded) - High density MMC
Manufacturer ID: 0x15 (Samsung)
Product name: Q72SMB (0x513732534d42), rev: 0x00, serial number: 0x1B47D47A
Manufacturing date: Aug 2015
CID: 15010051 3732534D 42001B47 D47A82E0
CSD: D0270132 0F5903FF F6DBFFEF 8E40400C
EXT_CSD revision: 1.7 (MMC v5.0, v5.01)
Partition info:
Boot1: 4096 KiB
Boot2: 4096 KiB
RPMB: 4096 KiB
User area: 7.28 GiB(7,818,182,656 bytes)
Cache size: 64 MiB
Partition configuration: 0x08
No boot acknowledge is sent (default)
Boot partition 1 is enabled for boot
Partitioning support: 0x07
Device support partitioning feature
Device can have enhanced technological features
Device partitioning possible
Boot configuration protection: 0x00
Boot bus conditions: 0x00
Boot area write protection: 0x00
Power-on write protection: possible
Permanent write protection: possible
Lock status: not locked
ANDROID System Info:
platform: sc8830, cpu abi: armeabi-v7a
manufacturer: LAVA
board: zsw898, name: zsw898_lava
brand: LAVA, model: Flair Z1
build id: LRX21M, version: 5.0 Lollipop (Lava_Z1_S806L)
build description: zsw898_lava-user 5.0 LRX21M eng..20150714.134254 release-keys
Internal storage: 5.40 GiB
crypto state: unencrypted
Selected: [SAMSUNG] moviNAND KMQ72000SM-B316/8GB (BGA221)
read info also error
Connecting to Download port...
Make sure battery is fully charged before flashing !!!
Power off the phone, Disconnect and reconnect the battery(if possible), Hold the VOL DOWN or VOL UP+DOWN and connect USB cable
Scanning Download port... Done.
Detected SCI USB2Serial (COM5)
Connection status: EHCI:HUB:HUB:USB 1.1 High-Speed
USB Driver: [Spreadtrum] SciU2S, version: 1.5.6.1, date: 2-15-2011
Boot id: SPRD3
Sending FDL ... Done.
Scanning Download port... Connect boot mode failed.